Hooker Blackheart 1967-72 C10 Truck LS/LT Swap System Info Thread

[chad64chevy]

Originally Posted by toddoky

Yes, all the required hangers are included in the kit. If they are not in your kit, you'll need to place a call to Holley Customer Service to get it remedied.

Have you guys got anywhere with the other c10? I have a 66 c10 what 2.5” kit number would be a better fit over the ones for 67-72?? Also I have the cpp bend pan hard bar that runs from the driver side frame to the passenger side trailering arm! Will these kit clear the bar??
Posted via Mobile Device

[toddoky]

Originally Posted by chad64chevy

Have you guys got anywhere with the other c10? I have a 66 c10 what 2.5” kit number would be a better fit over the ones for 67-72?? Also I have the cpp bend pan hard bar that runs from the driver side frame to the passenger side trailering arm! Will these kit clear the bar??
Posted via Mobile Device

The exhaust system fitment is the same on the 65-72 C10's; the 63 and 64 models will need to have the rear track bar frame bracket relocated further back on the frame rail to where it is located on the 65-72 truck frames. Compatibility with the CPP bar shouldn't an issue as I validated the fitment of one during the prototyping of the exhaust systems. I don't recall whether is was of bent or straight geometry however. This image shows the clearance path I designed into the passenger side tailpipe to allow clearance for aftermarket track bars that attach to the bottom of the trailing arm.

[chad64chevy]

Originally Posted by toddoky

The exhaust system fitment is the same on the 65-72 C10's; the 63 and 64 models will need to have the rear track bar frame bracket relocated further back on the frame rail to where it is located on the 65-72 truck frames. Compatibility with the CPP bar shouldn't an issue as I validated the fitment of one during the prototyping of the exhaust systems. I don't recall whether is was of bent or straight geometry however. This image shows the clearance path I designed into the passenger side tailpipe to allow clearance for aftermarket track bars that attach to the bottom of the trailing arm.

What is the eta for the BH13194 kit? Holley website says middle of May!
Posted via Mobile Device

[toddoky]

Originally Posted by chad64chevy

What is the eta for the BH13194 kit? Holley website says middle of May!
Posted via Mobile Device

I have no way to give you a reliable answer to that question as I have no involvement with the production side of the business. I do know from experience however that parts have ended up back in inventory far in advance of the dates posted on the website. Covid would most likely have had an impact on our production operations as is has with most other industries.