She is back.

[BB72CHEVKT]

Originally Posted by Ol Blue K20

If all rubber lines are new, problem might be inside tank. I would pull output line from pump and fire it up (gas already in carb) and check output. If the output volume is low I would remove gas cap and feed line from pump and blow back into tank and make sure line is clear. Sure sucks that you have to diagnois what you paid to have done!

I forgot to mention that I removed the hose from the pump and blew air back into the tank and you could hear the bubbling no problem. I am ready to drive this thing.

[LockDoc]

Originally Posted by BB72CHEVKT

I forgot to mention that I removed the hose from the pump and blew air back into the tank and you could hear the bubbling no problem. I am ready to drive this thing.

I had that problem with mine but for the life of me I can't remember what I did to fix it. It hasn't been that long ago either. I can remember blowing into the tank fill to put pressure on it while the wife turned it over and it would start and run then but after it set for a while it wouldn't start again. I'm thinking I put an electric pump back by the tank but I'm not 100% sure. It isn't here right now so I can't go out and look at it. Man, it's hell to get old...

LockDoc

[70cst]

Hey BB72CHEVKT ...

Just wanted to that is one sweet ride