Wheels for trade or puchase in Seattle. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**stllookn** · 11-14-2002, 06:49 PM

These are 15 inch x 10 inch wide with 5 on 5 bolt pattern and 3-5/8" back spacing. I would like to either trade for two 8 inch or purchase them outright. Will consider shipping if close and not too expensive.

chevy68388 · 11-14-2002, 11:31 PM

u think them would fit a s10 and what would u want for them out right how much would s&h be also does tires come with i dont want the tiresjust rims 45370

bigblock73 · 11-15-2002, 09:14 AM

S10 trucks do not have a 5 on 5 bolt pattern, they have a 4 3/4" I think (same as Camaros)....so these won't fit.

-Jeff

**stllookn** · 11-15-2002, 10:39 AM

I am pretty sure they won't fit an S-10 due to the 5 on 4-3/4 pattern which is the same as Camaros and Chevelles. BTW the tires will be tossed.

1Low76jimmy · 11-16-2002, 03:15 AM

How much do you want for the Rims outright!!! I am located in N. California so would have to ship them also.

Thank you,
Junior

11-14-2002, 06:49 PM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,463	Wheels for trade or puchase in Seattle. These are 15 inch x 10 inch wide with 5 on 5 bolt pattern and 3-5/8" back spacing. I would like to either trade for two 8 inch or purchase them outright. Will consider shipping if close and not too expensive. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

11-14-2002, 11:31 PM	#2
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	u think them would fit a s10 and what would u want for them out right how much would s&h be also does tires come with i dont want the tiresjust rims 45370 __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

11-15-2002, 10:39 AM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,463	I am pretty sure they won't fit an S-10 due to the 5 on 4-3/4 pattern which is the same as Camaros and Chevelles. BTW the tires will be tossed. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

11-15-2002, 09:14 AM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	S10 trucks do not have a 5 on 5 bolt pattern, they have a 4 3/4" I think (same as Camaros)....so these won't fit. -Jeff

11-16-2002, 03:15 AM	#5
1Low76jimmy Registered User Join Date: Jul 2001 Location: Fairfield, Ca Posts: 68	How much do you want for the Rims outright!!! I am located in N. California so would have to ship them also. Thank you, Junior



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.