MO Trailing arms for C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67 twins** · 03-18-2021, 10:18 AM

I am wanting to purchase a good pair of trailing arms for C20. Let me know what you have & price shipped to 63048

**67 twins** · 06-07-2021, 11:42 PM

Ttt

**BigBird05** · 06-08-2021, 04:56 PM

Are they different than a C-10? They are for a coil spring rear end aren't they?

**cwcarpenter98** · 06-08-2021, 09:37 PM

Quote:

Originally Posted by BigBird05

Are they different than a C-10? They are for a coil spring rear end aren't they?

The C20 arms have an additional plate of steel on the top and bottom of the arms to make them stronger for the additional weight capacity of the truck

**67 twins** · 06-08-2021, 11:27 PM

Quote:

Originally Posted by cwcarpenter98

The C20 arms have an additional plate of steel on the top and bottom of the arms to make them stronger for the additional weight capacity of the truck

Exactly right and the aftermarket replacement arms are made for C10s. The vendors will market them as fitting C20s but they don't have the extra plates.
If someone made new arms in the C20 style I'd just buy new!

**cwcarpenter98** · 06-09-2021, 12:26 PM

If you can't find a good set on C20s, you could just weld plates onto some C10 arms

**67 twins** · 06-11-2021, 01:40 AM

Quote:

Originally Posted by cwcarpenter98

If you can't find a good set on C20s, you could just weld plates onto some C10 arms

I thought about that. My thinking however is that not having a good way to cut some plates and not owning a welder, that to farm those jobs out could be costly. Hence why I was hoping to find a good pair of used ones.

**cwcarpenter98** · 06-13-2021, 10:51 AM

Yeah, that cost can add up quick. Good luck on your search!

**67 twins** · 06-15-2021, 11:58 AM

Ttt

**67 twins** · 06-21-2021, 12:08 PM

Ttt

**Madkidd007** · 06-24-2021, 09:12 AM

If it was a couple months away I’d have you taken care of but I’m still driving on that chassis. Try “uncle”

**67 twins** · 07-01-2021, 01:30 AM

Ttt

SkidmoreGarage · 07-04-2021, 01:33 PM

Since you have been looking so long, I wanted to make a suggestion to call around to your local (nearby states included) auto yards. Most people overlook the 3/4+ ton trucks.

As an aside, beware of rust inside the c20 arms. The plates trap all the dirt/salt and water. You may or may not see the rust that has started between the two halves of the I-beam. You probably also already know this, but the size and weight may make it uneconomical to ship the arms.

**Don D** · 07-17-2021, 11:01 AM

I have a set I got in Arizona several years ago, been in my storage shed in the dry.
Posted via Mobile Device

**67 twins** · 07-24-2021, 03:06 AM

I want to thank everyone who replied. I want to especially thank Don D for hooking me up with exactly what I needed. Best was the fact that he lives not far from me here in Missouri and had to travel to the next town over from me. So I only had to drive about 10 miles total to look at these in person before committing to the sale & no shipping charges Yeah!
This is why this forum is so great. It only took me four months on my WTB ad to find what I needed and these arms are in fantastic shape. This forum has been an immensely helpful resource to me.

**cwcarpenter98** · 07-24-2021, 06:59 AM

Congrats on the find!

03-18-2021, 10:18 AM	#1
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 582	Trailing arms for C20 I am wanting to purchase a good pair of trailing arms for C20. Let me know what you have & price shipped to 63048 __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

06-07-2021, 11:42 PM	#2
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 582	Re: Trailing arms for C20 Ttt __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

06-08-2021, 04:56 PM	#3
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: Trailing arms for C20 Are they different than a C-10? They are for a coil spring rear end aren't they?

06-09-2021, 12:26 PM	#6
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Trailing arms for C20 If you can't find a good set on C20s, you could just weld plates onto some C10 arms __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-13-2021, 10:51 AM	#8
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Trailing arms for C20 Yeah, that cost can add up quick. Good luck on your search! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-15-2021, 11:58 AM	#9
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 582	Re: Trailing arms for C20 Ttt __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

06-21-2021, 12:08 PM	#10
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 582	Re: Trailing arms for C20 Ttt __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

06-24-2021, 09:12 AM	#11
Madkidd007 Senior Member Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,236	Re: Trailing arms for C20 If it was a couple months away I’d have you taken care of but I’m still driving on that chassis. Try “uncle” __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

07-01-2021, 01:30 AM	#12
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 582	Re: Trailing arms for C20 Ttt __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

07-04-2021, 01:33 PM	#13
SkidmoreGarage Registered User Join Date: Mar 2020 Location: Portland, OR Posts: 335	Re: Trailing arms for C20 Since you have been looking so long, I wanted to make a suggestion to call around to your local (nearby states included) auto yards. Most people overlook the 3/4+ ton trucks. As an aside, beware of rust inside the c20 arms. The plates trap all the dirt/salt and water. You may or may not see the rust that has started between the two halves of the I-beam. You probably also already know this, but the size and weight may make it uneconomical to ship the arms.

07-17-2021, 11:01 AM	#14
Don D Senior Member Join Date: Apr 2021 Location: Robertsville Mo. Posts: 310	Re: Trailing arms for C20 I have a set I got in Arizona several years ago, been in my storage shed in the dry. Posted via Mobile Device

07-24-2021, 03:06 AM	#15
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 582	Re: Trailing arms for C20 I want to thank everyone who replied. I want to especially thank Don D for hooking me up with exactly what I needed. Best was the fact that he lives not far from me here in Missouri and had to travel to the next town over from me. So I only had to drive about 10 miles total to look at these in person before committing to the sale & no shipping charges Yeah! This is why this forum is so great. It only took me four months on my WTB ad to find what I needed and these arms are in fantastic shape. This forum has been an immensely helpful resource to me. __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

07-24-2021, 06:59 AM	#16
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Trailing arms for C20 Congrats on the find! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.