Manifolds Identification - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 10-07-2021, 09:22 PM

-
Can anyone tell if these are the trailblazer or camaro style manifolds? He says they are off of a GM 5.3 engine.

Thanks,
LockDoc

kglowacky · 10-07-2021, 09:34 PM

my guess trail blazers. 2001 Camaro have the cat welded right up on the manifold flange on the drivers side.

**LockDoc** · 10-07-2021, 09:44 PM

Quote:

Originally Posted by kglowacky

my guess trail blazers. 2001 Camaro have the cat welded right up on the manifold flange on the drivers side.

Thanks.

LockDoc

Joemomma1 · 10-08-2021, 01:37 PM

Not Camaro for sure. Could be trailblazer but I'd bet on them being truck manifolds.

**biketopia** · 10-08-2021, 01:47 PM

Those are super common truck manifolds. Not trailblazer ss manifolds either, the drivers side on the SS ones are longer at the merge. Also early Camaros were 5.7's and the newer ones are 6.2, the trailblzer ss was a 6.0l

**LockDoc** · 10-10-2021, 10:54 AM

-
OK, thanks guys.

LockDoc

10-07-2021, 09:22 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,330	Manifolds Identification - Can anyone tell if these are the trailblazer or camaro style manifolds? He says they are off of a GM 5.3 engine. Thanks, LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-07-2021, 09:34 PM	#2
kglowacky Registered User Join Date: Mar 2020 Location: The Woodlands,Tx Posts: 559	Re: Manifolds Identification my guess trail blazers. 2001 Camaro have the cat welded right up on the manifold flange on the drivers side.

10-08-2021, 01:37 PM	#4
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 812	Re: Manifolds Identification Not Camaro for sure. Could be trailblazer but I'd bet on them being truck manifolds.

10-08-2021, 01:47 PM	#5
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,008	Re: Manifolds Identification Those are super common truck manifolds. Not trailblazer ss manifolds either, the drivers side on the SS ones are longer at the merge. Also early Camaros were 5.7's and the newer ones are 6.2, the trailblzer ss was a 6.0l __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

10-10-2021, 10:54 AM	#6
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,330	Re: Manifolds Identification - OK, thanks guys. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.