Cutting down steering wheel - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**62bagger** · 11-10-2023, 10:04 PM

Thanks

SkinnyG · 11-10-2023, 10:47 PM

Nicely done!

I bent 1" 16ga round tubing around the dropped center of a cut down 15" Cavalier wheel, which gave me a 14.5" outside diameter. Blended it all in with JB Weld putty (a wet finger helps blend it all in), and like you did, sand sand sand sand and paint.

**62bagger** · 11-11-2023, 12:44 AM

Your wheel turned out real nice as well. There is a ton of sanding with this project. When you think you have it finished you notice spots that need more attention. I am happy with the finished result.

**62bagger** · 11-11-2023, 12:55 AM

Quote:

Originally Posted by SkinnyG

Nicely done!

I bent 1" 16ga round tubing around the dropped center of a cut down 15" Cavalier wheel, which gave me a 14.5" outside diameter. Blended it all in with JB Weld putty (a wet finger helps blend it all in), and like you did, sand sand sand sand and paint.

I looked at your video on the build of your wheel when I did research for this project but I didn't think I could get the tubbing bent in a nice flat ring like yours.

SkinnyG · 11-11-2023, 01:37 AM

It was easier than you might think, but you'd really want a 10' length.

On the other hand, the steel hoop is pretty cold now, as we're heading into winter. I might like a cover of some kind on it.

**62bagger** · 11-11-2023, 04:42 PM

I like the fact that it has a larger diameter than the original wheel. I agree that it might be cold in the winter.
Your truck looks great. Nice build.

11-10-2023, 10:04 PM	#26
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 264	Re: Cutting down steering wheel Thanks

11-10-2023, 10:47 PM	#27
SkinnyG Registered User Join Date: Feb 2012 Location: Beautiful BC, Canada, eh?! Posts: 2,172	Re: Cutting down steering wheel Nicely done! I bent 1" 16ga round tubing around the dropped center of a cut down 15" Cavalier wheel, which gave me a 14.5" outside diameter. Blended it all in with JB Weld putty (a wet finger helps blend it all in), and like you did, sand sand sand sand and paint. __________________ 1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate

11-11-2023, 12:44 AM	#28
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 264	Re: Cutting down steering wheel Your wheel turned out real nice as well. There is a ton of sanding with this project. When you think you have it finished you notice spots that need more attention. I am happy with the finished result.

11-11-2023, 01:37 AM	#30
SkinnyG Registered User Join Date: Feb 2012 Location: Beautiful BC, Canada, eh?! Posts: 2,172	Re: Cutting down steering wheel It was easier than you might think, but you'd really want a 10' length. On the other hand, the steel hoop is pretty cold now, as we're heading into winter. I might like a cover of some kind on it. __________________ 1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate

11-11-2023, 04:42 PM	#31
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 264	Re: Cutting down steering wheel I like the fact that it has a larger diameter than the original wheel. I agree that it might be cold in the winter. Your truck looks great. Nice build.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.