The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-18-2011, 11:01 AM   #1
es67chevy
Registered User
 
es67chevy's Avatar
 
Join Date: Aug 2007
Location: Bella Vista, AR
Posts: 1,107
Metallic-Sounding Drag In Tilt Steering Column When Turning Wheel

I just noticed that there is a slight drag in my steering wheel when I turn it. I don't have to be driving to notice this. In fact, I probably wouldn't notice it with the truck running. I'm wondering if this is a sign of a bearing problem. If so or potentially so, is my only option to disassemble column and lube or replace bearings? Or can I just ignore it and go on? It's hard to describe, but seems to be metallic in nature. Just a little resistance when rocking steering wheel left or right, even before the point of actually turning the wheels.
__________________
Eric

1967 C10 SWB
383 Stroker/TH400
Brother's One Piece Power Windows
Shaved Doors, Markers, and Bumpers
4/6 Early Classic Drop
Rear Fuel Tank (49-52 Chevy Car Tank)
Surf Blue Paint

Bella Vista, AR (Arkansas for those that get the 'A' states mixed up)

My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869
es67chevy is offline   Reply With Quote
Old 04-19-2011, 09:24 AM   #2
gcburdic
Restoration Virgin!
 
gcburdic's Avatar
 
Join Date: Jan 2008
Location: Huntersville, NC
Posts: 8,298
Re: Metallic-Sounding Drag In Tilt Steering Column When Turning Wheel

ttt
__________________
Geoff with a G
1968 Chevy C10 SWB The Mistress

1972 Custom Deluxe C20 Suburban A Suburban Named Isabella

1966 Ford Mustang Mama's High School Graduation Present
gcburdic is offline   Reply With Quote
Old 04-19-2011, 10:00 AM   #3
DT1
Registered User
 
DT1's Avatar
 
Join Date: Oct 2009
Location: Gardnerville Nv No Mo Cali!!
Posts: 869
Re: Metallic-Sounding Drag In Tilt Steering Column When Turning Wheel

I have the same thing happening with mine. It's not a tilt but it sounds like the bearing. I replaced my bearing and it didn't solve the problem.
DT1 is offline   Reply With Quote
Old 04-19-2011, 10:15 PM   #4
es67chevy
Registered User
 
es67chevy's Avatar
 
Join Date: Aug 2007
Location: Bella Vista, AR
Posts: 1,107
Re: Metallic-Sounding Drag In Tilt Steering Column When Turning Wheel

Quote:
Originally Posted by DT1 View Post
I have the same thing happening with mine. It's not a tilt but it sounds like the bearing. I replaced my bearing and it didn't solve the problem.
Bummer. Anyone else have any ideas? Especially those that have rebuilt columns
__________________
Eric

1967 C10 SWB
383 Stroker/TH400
Brother's One Piece Power Windows
Shaved Doors, Markers, and Bumpers
4/6 Early Classic Drop
Rear Fuel Tank (49-52 Chevy Car Tank)
Surf Blue Paint

Bella Vista, AR (Arkansas for those that get the 'A' states mixed up)

My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869
es67chevy is offline   Reply With Quote
Old 04-19-2011, 11:00 PM   #5
1972RedNeck
Registered User
 
1972RedNeck's Avatar
 
Join Date: Jan 2011
Location: Townsend MT
Posts: 1,725
Re: Metallic-Sounding Drag In Tilt Steering Column When Turning Wheel

It could be the horn contacts rubbing. My truck made that noise also so I took it apart and put dielectric grease on the contacts. It fixed it for about 3 months and then it made the noise again.
1972RedNeck is offline   Reply With Quote
Old 04-19-2011, 11:09 PM   #6
es67chevy
Registered User
 
es67chevy's Avatar
 
Join Date: Aug 2007
Location: Bella Vista, AR
Posts: 1,107
Re: Metallic-Sounding Drag In Tilt Steering Column When Turning Wheel

Ah, I appreciate the tip. I'll try that before removing the bearing assembly. I just replaced the turn signal switch too. I hope that is it! Specifically, where did you need to add the grease? I'm still trying to figure out what makes the horn work.
__________________
Eric

1967 C10 SWB
383 Stroker/TH400
Brother's One Piece Power Windows
Shaved Doors, Markers, and Bumpers
4/6 Early Classic Drop
Rear Fuel Tank (49-52 Chevy Car Tank)
Surf Blue Paint

Bella Vista, AR (Arkansas for those that get the 'A' states mixed up)

My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869
es67chevy is offline   Reply With Quote
Old 04-20-2011, 12:42 AM   #7
onebadbowtie
Registered User
 
onebadbowtie's Avatar
 
Join Date: Feb 2010
Location: Parsons, KS
Posts: 357
Re: Metallic-Sounding Drag In Tilt Steering Column When Turning Wheel

my steering column has this too. mine is dragging where the black after market steering wheel adapter cover from grant meets the original steering column. if your running an after market grant steering wheel and adapter i bet that is what it is.
__________________
James

94' Chevy K1500 Extended Cab 4x4 5.7
72' Chevy LWB K10, 350, SM465, NP205 Project "Daily Driver"
onebadbowtie is offline   Reply With Quote
Old 04-20-2011, 04:14 PM   #8
es67chevy
Registered User
 
es67chevy's Avatar
 
Join Date: Aug 2007
Location: Bella Vista, AR
Posts: 1,107
Re: Metallic-Sounding Drag In Tilt Steering Column When Turning Wheel

Thanks, James. I just went out and checked this along with horn switch. I removed the turn signal switch and the column sleeve covering the bearing so no interference. I have definitely narrowed it down to the bearing itself. Now if I could just figure out how to get those two pins out to remove the bearing assembly.

One board member mentioned using a socket and screw, but I haven't figured out how to execute that successfully. And someone else mentioned a special tool (something like a slide hammer), but I haven't found that tool yet either. Just not sure what to search for.
__________________
Eric

1967 C10 SWB
383 Stroker/TH400
Brother's One Piece Power Windows
Shaved Doors, Markers, and Bumpers
4/6 Early Classic Drop
Rear Fuel Tank (49-52 Chevy Car Tank)
Surf Blue Paint

Bella Vista, AR (Arkansas for those that get the 'A' states mixed up)

My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869
es67chevy is offline   Reply With Quote
Reply

Bookmarks

Tags
bearing, tilt column


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:01 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com