Jer's 64 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jer64 · 11-22-2014, 08:42 PM

finally got the motor fired up! had to put in new fuel injectors and swap out the old fuel rails, but it fired right up after that!

[IMG]

[/IMG]

Grizz1963 · 11-23-2014, 03:34 AM

Just looked through your build again.

Man it is soooooo right.

Jer64 · 01-10-2015, 10:08 PM

Quote:

Originally Posted by Grizz1963

Just looked through your build again.

Man it is soooooo right.

thank you Sir!

Jer64 · 01-10-2015, 10:10 PM

got my gauges all hooked up and working!

Monte's62 · 01-10-2015, 11:00 PM

Wow, looks really nice. The truck and the gauges.

64chevtruck · 01-11-2015, 08:10 AM

Wow. That gauge cluster is fantastic. The whole truck kicks ass. Nice work.

Jer64 · 02-01-2015, 12:22 AM

Quote:

Originally Posted by 64chevtruck

Wow. That gauge cluster is fantastic. The whole truck kicks ass. Nice work.

Quote:

Originally Posted by Monte's62

Wow, looks really nice. The truck and the gauges.

thanks guys!

Jer64 · 02-01-2015, 12:27 AM

Had a few minutes to escape to the garage today and was finally able to get my steering coloumn installed! I've had it sitting in the living room for about a year now so its nice to see it installed!

Jer64 · 02-27-2015, 12:50 AM

a few more updates, shift linkage is done and the steering linkage is mocked up and just about ready for set screws.

Bennett68C10 · 02-27-2015, 07:06 AM

Really nice looking build, motor sounds great with the Borlas. Thanks for the pics on the steering shaft, I'm running a touring dropmember on mine with an LS and was worried about the shaft.

4mulaSvaliant · 02-27-2015, 09:39 AM

Love the work you are doing! Subscribed!

Jer64 · 02-28-2015, 12:08 AM

Quote:

Originally Posted by Bennett68C10

Really nice looking build, motor sounds great with the Borlas. Thanks for the pics on the steering shaft, I'm running a touring dropmember on mine with an LS and was worried about the shaft.

thank you! the 30" steering column helped to reduce the angle. I could have gone with a 1 piece shaft and used a double u joint but I would've had to grind the frame and upper hat a bit to provide clearance.

Quote:

Originally Posted by 4mulaSvaliant

Love the work you are doing! Subscribed!

thank you Sir!

Jer64 · 06-05-2015, 01:30 PM

put my new wheels on the other day, 20x8.5 and 22x9 Raceline Executives!

**Palf70Step** · 06-05-2015, 05:35 PM

Very Nice!

Pro Performance · 06-05-2015, 06:03 PM

They look great on the truck, and really like the charcoal against the yellow.

Jer64 · 06-13-2015, 11:34 AM

Quote:

Originally Posted by Pro Performance

They look great on the truck, and really like the charcoal against the yellow.

thanks, and I appreciate all the help and excellent customer service!

Quote:

Originally Posted by Palf70Step

Very Nice!

thank you!

Jer64 · 06-13-2015, 11:38 AM

had my driveline shortened and installed it last night but had a little issue, I couldn't get the u joint to seat fully. is the u joint to big or do I just need to add a little more persuasion?

**Captainfab** · 06-14-2015, 12:03 AM

You either have the wrong U-joint or the caps aren't on all the way. The caps should be in between those little tabs at the base of the yoke.

Jer64 · 06-14-2015, 12:15 PM

Quote:

Originally Posted by Captainfab

You either have the wrong U-joint or the caps aren't on all the way. The caps should be in between those little tabs at the base of the yoke.

thanks, you were right! One of the needle bearings fell in between the cap and the u-joint which prevented the cap from going on all the way. I wouldn't have even thought to look at that w/out your post!

**Captainfab** · 06-15-2015, 12:11 AM

Glad to hear it was a simple fix.

Jer64 · 07-13-2015, 10:47 PM

haven't updated my thread in a while, but I got this driving! I had some problems with it going into limp mode when I hit the throttle, but I got the PCM re-tuned to account for the plastic pedal assy in the '06 and everything seems fine now.

**Palf70Step** · 07-14-2015, 05:27 AM

stomper · 02-08-2016, 04:14 PM

Sweet ride! I sit next to Tommy Green. He sent me a link to this thread.

Jer64 · 02-09-2016, 12:15 AM

Quote:

Originally Posted by stomper

Sweet ride! I sit next to Tommy Green. He sent me a link to this thread.

Right on, Tommy is a pretty cool guy! I've worked with him for a while and always talk about cars...

Jer64 · 02-09-2016, 12:43 AM

had a local shop redo my front brake lines for me and install my PB hood brackets. Also had to replace my trailing arm crossmember for additional driveline clearance.

11-22-2014, 08:42 PM	#101
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 finally got the motor fired up! had to put in new fuel injectors and swap out the old fuel rails, but it fired right up after that! [IMG][/IMG] __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

11-23-2014, 03:34 AM	#102
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,484	Re: Jer's 64 Just looked through your build again. Man it is soooooo right. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

01-10-2015, 10:10 PM	#104
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 got my gauges all hooked up and working! __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

01-10-2015, 11:00 PM	#105
Monte's62 Registered User Join Date: Dec 2013 Location: Dallas Ga Posts: 308	Re: Jer's 64 Wow, looks really nice. The truck and the gauges.

01-11-2015, 08:10 AM	#106
64chevtruck Registered User Join Date: Aug 2013 Location: Rochester Wa. Posts: 395	Re: Jer's 64 Wow. That gauge cluster is fantastic. The whole truck kicks ass. Nice work. __________________ 64 C10 Fleetside LB 4 Sp/292 Build http://67-72chevytrucks.com/vboard/s...d.php?t=602438 70 GMC 1500 Fleetside LB 3OT/350 Build http://67-72chevytrucks.com/vboard/s...83#post6767983 76 GMC CCLB Dually Build http://67-72chevytrucks.com/vboard/s...d.php?t=691612 79 GMC 3500 Fleetside LB 454/400 90 Suburban Silverado 4x4 350/700R4 97 1500 Cheyenne Short Fleet 350/5sp

02-01-2015, 12:27 AM	#108
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 Had a few minutes to escape to the garage today and was finally able to get my steering coloumn installed! I've had it sitting in the living room for about a year now so its nice to see it installed! __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

02-27-2015, 12:50 AM	#109
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 a few more updates, shift linkage is done and the steering linkage is mocked up and just about ready for set screws. __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

02-27-2015, 07:06 AM	#110
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Jer's 64 Really nice looking build, motor sounds great with the Borlas. Thanks for the pics on the steering shaft, I'm running a touring dropmember on mine with an LS and was worried about the shaft. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-27-2015, 09:39 AM	#111
4mulaSvaliant Registered User Join Date: Oct 2014 Location: VIRGINIA BEACH Posts: 140	Re: Jer's 64 Love the work you are doing! Subscribed! __________________ 64 LWB to SWB Step build. Daily driven! http://67-72chevytrucks.com/vboard/s...d.php?t=647168

06-05-2015, 01:30 PM	#113
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 put my new wheels on the other day, 20x8.5 and 22x9 Raceline Executives! __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

06-05-2015, 05:35 PM	#114
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,674	Re: Jer's 64 Very Nice! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-05-2015, 06:03 PM	#115
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Jer's 64 They look great on the truck, and really like the charcoal against the yellow.

06-13-2015, 11:38 AM	#117
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 had my driveline shortened and installed it last night but had a little issue, I couldn't get the u joint to seat fully. is the u joint to big or do I just need to add a little more persuasion? __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

06-14-2015, 12:03 AM	#118
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Jer's 64 You either have the wrong U-joint or the caps aren't on all the way. The caps should be in between those little tabs at the base of the yoke. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-15-2015, 12:11 AM	#120
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Jer's 64 Glad to hear it was a simple fix. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

07-13-2015, 10:47 PM	#121
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 haven't updated my thread in a while, but I got this driving! I had some problems with it going into limp mode when I hit the throttle, but I got the PCM re-tuned to account for the plastic pedal assy in the '06 and everything seems fine now. __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

07-14-2015, 05:27 AM	#122
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,674	Re: Jer's 64 __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-08-2016, 04:14 PM	#123
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,695	Re: Jer's 64 Sweet ride! I sit next to Tommy Green. He sent me a link to this thread. __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Gold White Fleetsides/Saddle

02-09-2016, 12:43 AM	#125
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 had a local shop redo my front brake lines for me and install my PB hood brackets. Also had to replace my trailing arm crossmember for additional driveline clearance. __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

Register or Log In To remove these advertisements.