Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-28-2021, 02:52 PM | #1 |
Registered User
Join Date: May 2013
Location: Post Falls, ID
Posts: 884
|
anyone wanna help me pick a cam?
Im building a 350 for my '68 C10. Nothing crazy, shootin' for good dependable motor.
Engine specs: Bore________4.06" (0.060" over) Stroke_______3.48" (stock) Quench _____.037" (±.003) Compression__9.25:1 (±) Speed Pro flat top pistons with 4 valve reliefs (-6cc) Heads are 76cc "493" castings with 1.94" valves that have been moderately ported ( I probably made them slower ) transmission will be Th400, not sure which torque converter it will have, but it will be mild. I will build a Quadra-Jet M4M for it and mount it on a factory high-rise cast iron manifold. I'm keeping the points ignition. The truck weighs 4100lbs, with me in it. I want to focus on dependability and drivability, but I defiantly want it to pull as strong as possible. Any Cam gurus here wanna help me out? Thanks, -Russ
__________________
Insert clever text here: |
Bookmarks |
|
|