parting out a 59 GMC stepside longbed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mac57truck · 11-09-2003, 08:40 PM

Let me know if I can help you out.The chassis is good and I am asking $200 for it.I will list more parts as I tear into it.

ClAsSiC_nUT · 11-10-2003, 03:22 AM

WHAT'S THE CAB LIKE??

mac57truck · 11-10-2003, 09:04 PM

The cab is not the best, it needs the usual work.

ClAsSiC_nUT · 11-12-2003, 03:54 AM

BIG OR SMALL WINDOW?? I KNOW SOMEONE LOOKING FOR A BIG BACK WINDOW 59 CAB W/TITLE.

mac57truck · 11-12-2003, 07:54 PM

sorry small

ClAsSiC_nUT · 11-13-2003, 02:43 AM

that's ok he'll just have to keep looking.

resin addict · 12-06-2003, 03:37 AM

Do you have good rear fenders for this truck?

nitor · 12-06-2003, 09:34 AM

mac57,
Do you have the windshield? I know someone needing a windshield for a '56. This should fit.

Thanks,

Jim

mac57truck · 12-06-2003, 03:20 PM

sorry windshield is bad

resin addict · 12-07-2003, 03:39 PM

How are the Fenders?

mac57truck · 12-07-2003, 08:59 PM

front or rear

resin addict · 12-08-2003, 12:45 AM

I'm looking for a passenger side rear

mac57truck · 12-08-2003, 07:32 PM

the one I have needs a little work

mac57truck · 12-08-2003, 07:33 PM

the front part has a little rot near the step.and the lower rear has a tear.If still interested I can get better pictures seeing how the rear fenders are now removed.

mac57truck · 12-11-2003, 10:15 PM

ttt

rico_bob · 12-18-2003, 11:27 PM

MAC57... Thanks for the nice trade. rico_bob

(We traded chassis for trans x-member and an embossed front bed panel)!

ScoobDogg02 · 12-19-2003, 01:46 AM

how are the hood hinges

jack'd up · 12-23-2003, 01:43 AM

Do you have a pass. side vent window frame and a drivers side door glass?

rico_bob · 12-23-2003, 05:41 AM

Do you want as used drivers side vent glass frame or new. I have both. I sell new glass. Do you want clear, green tint or "smoke" www.ricos-rods-and-relics.com

rico_bob · 12-23-2003, 05:43 AM

Lowest Glass prices anywhere! New windshields delivered for 235.

mac57truck · 01-02-2004, 01:54 AM

I also should have a vent frame so pm me if you like

NAPCO ken · 01-24-2004, 10:10 AM

Hey Classic Nut, I have a friend who is selling a '57 Chevy big window cab, no rust and radio not cut out. He is asking $400 and it is in So. Calif.

ClAsSiC_nUT · 01-27-2004, 02:30 AM

Hey NAPCO, that sounds cool E-mail me @ weldonwatson81@cox.netw/info.

rico_bob · 01-27-2004, 03:53 AM

California is a whole lot closer to Arizona than Michigan any day of the week... Ha Ha! mtcw rico_bob

Ichevyluvr · 10-05-2004, 11:24 PM

Is there front turn signals in it.

11-09-2003, 08:40 PM	#1
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	parting out a 59 GMC stepside longbed.Rolling chassis $200.Finally gone thanks Rico Let me know if I can help you out.The chassis is good and I am asking $200 for it.I will list more parts as I tear into it. __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages. Last edited by mac57truck; 01-02-2004 at 01:52 AM.

11-10-2003, 09:04 PM	#3
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	The cab is not the best, it needs the usual work. Attached Images __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.

11-12-2003, 07:54 PM	#5
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	sorry small __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.

12-06-2003, 03:37 AM	#7
resin addict Registered User Join Date: Apr 2003 Location: Grand Rapids, Michigan Posts: 367	? on Parts Do you have good rear fenders for this truck?

12-06-2003, 09:34 AM	#8
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	mac57, Do you have the windshield? I know someone needing a windshield for a '56. This should fit. Thanks, Jim __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer

11-10-2003, 03:22 AM	#2
ClAsSiC_nUT Registered User Join Date: Nov 2003 Location: Phoenix, AZ Posts: 39	WHAT'S THE CAB LIKE??

11-12-2003, 03:54 AM	#4
ClAsSiC_nUT Registered User Join Date: Nov 2003 Location: Phoenix, AZ Posts: 39	BIG OR SMALL WINDOW?? I KNOW SOMEONE LOOKING FOR A BIG BACK WINDOW 59 CAB W/TITLE.

11-13-2003, 02:43 AM	#6
ClAsSiC_nUT Registered User Join Date: Nov 2003 Location: Phoenix, AZ Posts: 39	that's ok he'll just have to keep looking.

12-06-2003, 03:20 PM	#9
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	sorry windshield is bad __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.

12-07-2003, 03:39 PM	#10
resin addict Registered User Join Date: Apr 2003 Location: Grand Rapids, Michigan Posts: 367	Fenders How are the Fenders?

12-07-2003, 08:59 PM	#11
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	front or rear __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.

12-08-2003, 12:45 AM	#12
resin addict Registered User Join Date: Apr 2003 Location: Grand Rapids, Michigan Posts: 367	rear fenders I'm looking for a passenger side rear

12-08-2003, 07:32 PM	#13
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	the one I have needs a little work Attached Images __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.

12-08-2003, 07:33 PM	#14
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	the front part has a little rot near the step.and the lower rear has a tear.If still interested I can get better pictures seeing how the rear fenders are now removed. __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.

12-11-2003, 10:15 PM	#15
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	ttt __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.



Register or Log In To remove these advertisements.

12-18-2003, 11:27 PM	#16
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	MAC57... Thanks for the nice trade. rico_bob (We traded chassis for trans x-member and an embossed front bed panel)! __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

12-19-2003, 01:46 AM	#17
ScoobDogg02 Registered User Join Date: Dec 2003 Posts: 2	how are the hood hinges

12-23-2003, 01:43 AM	#18
jack'd up Registered User Join Date: May 2003 Location: DFW Posts: 127	Do you have a pass. side vent window frame and a drivers side door glass?

12-23-2003, 05:41 AM	#19
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	Do you want as used drivers side vent glass frame or new. I have both. I sell new glass. Do you want clear, green tint or "smoke" www.ricos-rods-and-relics.com __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

12-23-2003, 05:43 AM	#20
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	Lowest Glass prices anywhere! New windshields delivered for 235. __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

01-02-2004, 01:54 AM	#21
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	I also should have a vent frame so pm me if you like __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.

01-24-2004, 10:10 AM	#22
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	Hey Classic Nut, I have a friend who is selling a '57 Chevy big window cab, no rust and radio not cut out. He is asking $400 and it is in So. Calif. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

01-27-2004, 02:30 AM	#23
ClAsSiC_nUT Registered User Join Date: Nov 2003 Location: Phoenix, AZ Posts: 39	Hey NAPCO, that sounds cool E-mail me @ weldonwatson81@cox.netw/info. Last edited by ClAsSiC_nUT; 01-27-2004 at 02:33 AM.

01-27-2004, 03:53 AM	#24
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	California is a whole lot closer to Arizona than Michigan any day of the week... Ha Ha! mtcw rico_bob __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

10-05-2004, 11:24 PM	#25
Ichevyluvr Registered User Join Date: Sep 2004 Location: Stony mountain Mb Posts: 57	Is there front turn signals in it. __________________ 59 sb stepside all original except paint. Opps this is old it has been changed.

Register or Log In To remove these advertisements.