The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Paint & Bodywork > Detailing

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-23-2012, 11:01 AM   #1
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Question Cleaning my wheels up

What are the best cleaner & polish for the aluminum on the Boss 338's?

I need to get mine cleaned up good. What is recommended for the aluminum.

The picture was when they were installing them.


__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 09-23-2012, 12:22 PM   #2
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Cool Re: Cleaning my wheels up

I ended up trying Never Dull. Seems to have cleaned them up nicely so far. Got both the driver sides done. Going to do passenger side in a few.





Now what to put on them to keep them looking this good?
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 09-23-2012, 02:53 PM   #3
Tinkermc
Registered User
 
Join Date: Jul 2011
Location: Farmville, Va
Posts: 3,027
Re: Cleaning my wheels up

what you have looks good in pics
Tinkermc is offline   Reply With Quote
Old 09-23-2012, 04:07 PM   #4
weever82
Registered User
 
weever82's Avatar
 
Join Date: Sep 2012
Location: Queen Creek, AZ
Posts: 551
Re: Cleaning my wheels up

The best I have personally used for my alluminum wheels is "mothers". Rubs on white and will come off jet black from the wheel grime. Then buff it with a microfiber towel. You will have the cleanest wheels in town... next to mine.

It's a little round white/red can.

Weev-
__________________
Weev-

Life's tough...... It's even tougher when your stupid - John Wayne
weever82 is offline   Reply With Quote
Old 09-23-2012, 04:26 PM   #5
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Cool Re: Cleaning my wheels up

Yea I've used the mother's before. What I had left looked dried out so I used the never dull.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 10-04-2012, 05:03 PM   #6
piecesparts
Parts and more parts
 
piecesparts's Avatar
 
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
Re: Cleaning my wheels up

I use the Mother's aluminum polish and then follow that up with Mother's Billet polish for a mirror finish. I use a detail spray to clean the black hardened aluminum polish off of the wheel between applications. I then seal the metal with a product from Wizards products, that is called "Power Seal" http://www.wizardsproducts.com/store...8-oz-p-15.html.

I have found that it works quite well in keeping the polished parts clean of water spots.
__________________
Frank
piecesparts is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com