Parting 1971 Suburban (NM) - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 04-01-2009, 11:47 PM

Looks like you left your burb in the wrong part of town.

**Hart_Rod** · 04-02-2009, 07:54 PM

Quote:

Originally Posted by NPilot1975

Looks like you left your burb in the wrong part of town.

, they weren't messing around.......here's some more pics,

.

**Hart_Rod** · 04-05-2009, 09:37 AM

Quote:

Originally Posted by oldgold70c10

OK that will work for me. I'll PM you my email.
Thanks!!

Oldgold70C10 - I'm leaving for Norman on Friday. Where were you wanting to meet at? Let me know.

R/

**Hart_Rod** · 04-08-2009, 11:07 AM

Bttt

*project 67 sub* · 04-08-2009, 04:10 PM

any idea on that corner piece of the roof?

**Hart_Rod** · 04-09-2009, 10:17 PM

Quote:

Originally Posted by project 67 sub

any idea on that corner piece of the roof?

I'll cut it out when I cut the rest of the roof off. If anyone needs any patch panels, here's what's left.................

**kev2809** · 04-10-2009, 09:09 AM

I couldn't really tell, but is the spare tire sheetmetal gone?

*project 67 sub* · 04-10-2009, 03:44 PM

oh i forgot to tell you but i need it to right about an inch above the body line in the roof.
Name: IMG_1011%20%28Small%29.JPG
Views: 407
Size: 73.3 KB

**Hart_Rod** · 04-10-2009, 10:35 PM

Quote:

Originally Posted by kev2809

I couldn't really tell, but is the spare tire sheetmetal gone?

Are you talking about the bolt in spare tire tub or the piece that is a part of the body? Pictures if possible.

Quote:

Originally Posted by project 67 sub

oh i forgot to tell you but i need it to right about an inch above the body line in the roof.
Attachment 450729

You'll need to take a closer picture. If you're talking about what I think you are, I might be using that for my crewcab.

R/

**kev2809** · 04-10-2009, 11:01 PM

ill get some pics up tomorrow of what im talkin about

NPilot1975 · 04-11-2009, 03:59 AM

Rob, I ended up getting a good air dash, but still need the 2 patch panels I talked to you about before. I still need to look at that fender I have to see what kind of shape it is actually in.

67ChevyRedneck · 04-11-2009, 11:31 AM

Rob, after staring at this pic the inner wheel tubs are NOT the same. The trucks are squared off at the top. Oh well, I was hopeful. That should make shipping cheaper at least

I do, however, would still like the stuff in red. A couple inches from the wheel lip ridge is fine. The turn signal patches only need to be a little bigger than the actual turn signal hole (I'm going to completely cut them out and replace it, not just patch over the hole, I see that as a place for water to sit.)

Let me know an approx price... go easy on me

DINS 1 · 04-13-2009, 09:32 PM

is it next week yet?

Quote:

Dins - got it pulled today. Here are some pictures. Will ship by the end of the week.

R/

**Hart_Rod** · 04-13-2009, 11:16 PM

Quote:

Originally Posted by DINS 1

is it next week yet?

Sorry Dale, I was out of town since last Friday. I'll take it to greyhound tomorrow. PM me your phone number, they will call you when it gets to the station.

R

**Hart_Rod** · 04-13-2009, 11:24 PM

Quote:

Originally Posted by Hart_Rod

Sorry Dale, I was out of town since last Friday. I'll take it to greyhound tomorrow. PM me your phone number, they will call you when it gets to the station.

R

I meant Wade,

. It suxs not being able to edit..............

CARZ1968 · 04-14-2009, 04:29 AM

If this is not what Kev2809 is talking about, and yours is in good shape, I would be interested in the inner sheetmetal (the metal that the spare tire well bolts to)
shipped to 19128 If it is what Kev2809 wants, pm me, if he passes on it.I do not need the vertical piece that the spare actually bolts to or that bracket behind the tail light, just the lower panel.

**Hart_Rod** · 04-14-2009, 10:19 AM

Quote:

Originally Posted by CARZ1968

If this is not what Kev2809 is talking about, and yours is in good shape, I would be interested in the inner sheetmetal (the metal that the spare tire well bolts to)
shipped to 19128 If it is what Kev2809 wants, pm me, if he passes on it.I do not need the vertical piece that the spare actually bolts to or that bracket behind the tail light, just the lower panel.

It's in great shape. If Kev2809 doesn't want it, it's yours.

R/

**Hart_Rod** · 04-15-2009, 11:32 AM

Quote:

Originally Posted by kev2809

ill get some pics up tomorrow of what im talkin about

Kev - did you ever get any pictures?

R

markster5 · 04-15-2009, 01:35 PM

this is of topic but i thought aone one may be interested found 72 suburban 3door ambluance for sale on crages list in so fl. posting #1121659449

**Hart_Rod** · 04-16-2009, 10:51 AM

Quote:

Originally Posted by DINS 1

is it next week yet?

Wade - got it shipped yesterday via FEDEX. PM me if you need the tracking #.

Quote:

Originally Posted by NPilot1975

Rob, I ended up getting a good air dash, but still need the 2 patch panels I talked to you about before. I still need to look at that fender I have to see what kind of shape it is actually in.

I'm still working on cutting parts out.

Quote:

Originally Posted by 67ChevyRedneck

Rob, after staring at this pic the inner wheel tubs are NOT the same. The trucks are squared off at the top. Oh well, I was hopeful. That should make shipping cheaper at least

I do, however, would still like the stuff in red. A couple inches from the wheel lip ridge is fine. The turn signal patches only need to be a little bigger than the actual turn signal hole (I'm going to completely cut them out and replace it, not just patch over the hole, I see that as a place for water to sit.)

Let me know an approx price... go easy on me

I'm still working on cutting parts out. The bottom 6" of the wheel openings are not good at all.

Quote:

Originally Posted by kev2809

ill get some pics up tomorrow of what im talkin about

Still waiting on pictures....

.

**Hart_Rod** · 04-20-2009, 12:06 PM

I'm finally about caught up with cutting out parts and shipping. If anyone else wants anything off of this suburban, please take a look and let me know. I plan on having this gone in a couple of weeks.

OzarkTim - I should have the posi-unit pulled this week.

67ChevyRedneck - I don't think these wheel openings are worth saving. Send me pictures of yours and I'll send you pictures of what is left, robhartley@aol.com. The cutouts for the marker lights won't be a problem, how many do you need?

Jamison - I've got your parts also. Are you going to wait I come back to FL this fall or do you want me to ship?

Carz1968 - Here's a picture of what I cut out for you. I've got it boxed and waiting.
.
.

70rs/ss · 04-20-2009, 12:43 PM

Is the rear sold? I need a 5-lugger posi is not required. LMK?

**Hart_Rod** · 04-20-2009, 01:05 PM

Quote:

Originally Posted by 70rs/ss

Is the rear sold? I need a 5-lugger posi is not required. LMK?

No, I still have it (no-posi). I don't want to disable it, so I would require a donor rear to keep it as a roller. Y don't you just buy the whole chassis????? Or find me a perfect short wide bed floor and endgate to trade,

.

70rs/ss · 04-20-2009, 02:05 PM

How much for the rolling chasis? I am not sure of any floors, but I can check around?

**Hart_Rod** · 04-20-2009, 03:11 PM

Quote:

Originally Posted by 70rs/ss

How much for the rolling chasis? I am not sure of any floors, but I can check around?

I've got it listed for $500 with all the parts in red, minus the tranny crossmember.............

04-01-2009, 11:47 PM	#101
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Parting 1971 Suburban (NM) Looks like you left your burb in the wrong part of town. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

04-08-2009, 11:07 AM	#104
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,832	Re: Parting 1971 Suburban (NM) Bttt __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-08-2009, 04:10 PM	#105
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Parting 1971 Suburban (NM) any idea on that corner piece of the roof?

04-10-2009, 09:09 AM	#107
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: Parting 1971 Suburban (NM) I couldn't really tell, but is the spare tire sheetmetal gone?

04-10-2009, 03:44 PM	#108
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Parting 1971 Suburban (NM) oh i forgot to tell you but i need it to right about an inch above the body line in the roof.

04-10-2009, 11:01 PM	#110
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: Parting 1971 Suburban (NM) ill get some pics up tomorrow of what im talkin about

04-11-2009, 03:59 AM	#111
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Parting 1971 Suburban (NM) Rob, I ended up getting a good air dash, but still need the 2 patch panels I talked to you about before. I still need to look at that fender I have to see what kind of shape it is actually in. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

04-11-2009, 11:31 AM	#112
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting 1971 Suburban (NM) Rob, after staring at this pic the inner wheel tubs are NOT the same. The trucks are squared off at the top. Oh well, I was hopeful. That should make shipping cheaper at least I do, however, would still like the stuff in red. A couple inches from the wheel lip ridge is fine. The turn signal patches only need to be a little bigger than the actual turn signal hole (I'm going to completely cut them out and replace it, not just patch over the hole, I see that as a place for water to sit.) Let me know an approx price... go easy on me Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 04-11-2009 at 11:32 AM.

04-14-2009, 04:29 AM	#116
CARZ1968 Bowties from Birth Join Date: Jan 2008 Location: Chester County PA Posts: 86	Re: Parting 1971 Suburban (NM) If this is not what Kev2809 is talking about, and yours is in good shape, I would be interested in the inner sheetmetal (the metal that the spare tire well bolts to) shipped to 19128 If it is what Kev2809 wants, pm me, if he passes on it.I do not need the vertical piece that the spare actually bolts to or that bracket behind the tail light, just the lower panel. Attached Images __________________ 68 K10 Burb aka "da bomb" 72 C10 SWB Highlander 97 30th anniv. Z28 Conv 99 Chevy Crew 454 11 Traverse AWD

04-15-2009, 01:35 PM	#119
markster5 Registered User Join Date: Jan 2009 Location: stuart florida Posts: 59	Re: Parting 1971 Suburban (NM) this is of topic but i thought aone one may be interested found 72 suburban 3door ambluance for sale on crages list in so fl. posting #1121659449

04-20-2009, 12:06 PM	#121
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,832	Re: Parting 1971 Suburban (NM) I'm finally about caught up with cutting out parts and shipping. If anyone else wants anything off of this suburban, please take a look and let me know. I plan on having this gone in a couple of weeks. OzarkTim - I should have the posi-unit pulled this week. 67ChevyRedneck - I don't think these wheel openings are worth saving. Send me pictures of yours and I'll send you pictures of what is left, robhartley@aol.com. The cutouts for the marker lights won't be a problem, how many do you need? Jamison - I've got your parts also. Are you going to wait I come back to FL this fall or do you want me to ship? Carz1968 - Here's a picture of what I cut out for you. I've got it boxed and waiting. . . Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 04-20-2009 at 12:10 PM.

04-20-2009, 12:43 PM	#122
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Parting 1971 Suburban (NM) Is the rear sold? I need a 5-lugger posi is not required. LMK?

04-20-2009, 02:05 PM	#124
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Parting 1971 Suburban (NM) How much for the rolling chasis? I am not sure of any floors, but I can check around?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.