OK FS: 77 Suburban parts truck* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RicksTrucks · 07-31-2007, 08:04 PM

$600 OBO for the whole thing or let me know what you need and I will post pics and prices. No engine or tranny. May have some of the interior already sold.

Walts_restoration · 08-07-2007, 03:13 PM

is the grill crack free? if so, while your in kc you ought to head out to the woodlands or stop by lawrence, haha. Woodlands swapmeet is saturday the 11th

RicksTrucks · 10-06-2007, 04:19 PM

Finally got it moved to my place so I can actively work it now.
Cleaned up one of the eyebrows to show just minor pitting - good DD condition.

RicksTrucks · 10-06-2007, 04:23 PM

More

mexgrhd68 · 03-10-2008, 01:15 PM

Quote:

Originally Posted by RicksTrucks

More

hello Rick, sorry about your loss. I,m interested in the a/c vents and the wood grain insert that they are in and also the circuit board from behind the gauge cluster. how much as a package deal to Visalia,California 93277?

RicksTrucks · 03-14-2008, 10:59 PM

Quote:

Originally Posted by mexgrhd68

hello Rick, sorry about your loss. I,m interested in the a/c vents and the wood grain insert that they are in and also the circuit board from behind the gauge cluster. how much as a package deal to Visalia,California 93277?

Will attempt to remove these today and check on shipping charges.

RicksTrucks · 03-15-2008, 04:37 AM

Quote:

Originally Posted by mexgrhd68

hello Rick, sorry about your loss. I,m interested in the a/c vents and the wood grain insert that they are in and also the circuit board from behind the gauge cluster. how much as a package deal to Visalia,California 93277?

Went out to pull the stuff today, but couldn't figure out how to get that panel out of the dash. Any ideas?

Stepside65 · 10-07-2007, 02:11 PM

I could use the pb and ps out of it. Would be nice on my 63

Edit: Scratch the pb... I forgot my master cylinder also doubles as the clutch master cylinder.

RicksTrucks · 02-20-2008, 12:00 AM

Need to finish parting this so I can take it to the crusher. Front door panels are sold and the steering column may be sold.

Let me know what you need a pic or price on.

Walts_restoration · 02-20-2008, 07:05 AM

Hey Rick, never heard back from you about the camaros, still interested in selling?

hessian18 · 02-20-2008, 08:35 AM

I didnt see this thread until right now...

how much for this trim piece to 92345 ??

RicksTrucks · 02-20-2008, 08:42 AM

Quote:

Originally Posted by hessian18

I didnt see this thread until right now...

how much for this trim piece to 92345 ??

How does $15 shipped sound to you?

hessian18 · 02-20-2008, 08:57 AM

Quote:

Originally Posted by RicksTrucks

How does $15 shipped sound to you?

Sounds great..PM sent..

Oh yeah...do you know if the temp gauge worked at all ??

If so, how much ??

**N2TRUX** · 02-20-2008, 11:39 AM

Please post parts prices per forum rules...

RicksTrucks · 02-20-2008, 09:18 PM

Quote:

Originally Posted by N2TRUX

Please post parts prices per forum rules...

Let's not go through this again, please. Prices are and will be posted as someone wants something. The whole truck is priced (to comply with the rules). This is the way we do it all of the time on the 67-72 parts forum.

**N2TRUX** · 02-21-2008, 12:15 PM

XI. All For Sale posts shall have a price or prices, as well as your
location. No bids or auctions allowed here!!! If you don't know the
price of what you are selling, then you should do some research. If a Moderator or Administrator here asks you to post price(s) and you have not within a 12 hour time frame, they will delete your thread, period.

BowTieOgre · 02-21-2008, 12:19 PM

I dont understand...he has a price.

RicksTrucks · 02-21-2008, 12:54 PM

He did this to me last time and I lost a couple of sales when the post went away.

Please check with Liz, this is okay. I posted a price for the whole truck - which complies with the rules - then I will price individual parts as members tell me what they are interested in. We do this all of the time on the 67-72 parts forum.

hessian18 · 02-21-2008, 01:09 PM

PM sent back to ya !!

***Liz*** · 02-21-2008, 07:48 PM

Quote:

Originally Posted by RicksTrucks

He did this to me last time and I lost a couple of sales when the post went away.

Please check with Liz, this is okay. I posted a price for the whole truck - which complies with the rules - then I will price individual parts as members tell me what they are interested in. We do this all of the time on the 67-72 parts forum.

I do not get to read the 67-72 parts board unless an issue is brought to my attention. I am not sure why the mods are or were allowing this, as it is not correct. http://67-72chevytrucks.com/vboard/s...d.php?t=255798
If you are pricing a truck to sell it goes in the classifieds. If you are selling parts it goes in parts... we understand that it is difficult to price a parts truck, and no one expects you to price every piece.. but the majority of the large parts can be priced individually.

I will pass this message on to the staff, as the rules need to stay consistent on ALL of the areas.

Ken is doing as Josh asked all the staff to do. He is not picking on you or anyone else

RicksTrucks · 02-21-2008, 08:05 PM

Then the question arises- how many parts on a parts truck do you have to price. I have priced several pieces that guys have PM'd me about.

So I guess I will list a couple and say sales is pending, that should do it then.

Tilt steering column $75 - pending
Trim under column $5 - pending - SOLD
Trim on DS pillar $5 - pending - SOLD
Front Door Panels - SOLD

***Liz*** · 02-22-2008, 11:07 AM

Quote:

Originally Posted by RicksTrucks

Then the question arises- how many parts on a parts truck do you have to price.

24.2

the examples n2trux posted are pretty much right on

**N2TRUX** · 02-21-2008, 09:36 PM

I appreciate your understanding the rules. Just so you are clear on how this works let me offer some examples. If you need further clarifications please let me know.

1.- Example #1

2.- Example #2

Mickey_D · 02-21-2008, 10:55 PM

I'm going to ask a weird one, how much for the ashtray to 56754?

I specifically need a working lighter socket, mine is toast and there's no fixing it. I figure the easiest way is to replace the whole moving part of the ashtray, door and all.

RicksTrucks · 02-23-2008, 11:41 AM

Quote:

Originally Posted by Mickey_D

I'm going to ask a weird one, how much for the ashtray to 56754?

I specifically need a working lighter socket, mine is toast and there's no fixing it. I figure the easiest way is to replace the whole moving part of the ashtray, door and all.

Let me see if I can easily test it, then I will price it. What I am thinking is about $20 shipped.

10-06-2007, 04:19 PM	#3
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: 77 Suburban parts truck Finally got it moved to my place so I can actively work it now. Cleaned up one of the eyebrows to show just minor pitting - good DD condition. Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

10-06-2007, 04:23 PM	#4
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: 77 Suburban parts truck More Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

10-07-2007, 02:11 PM	#8
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: FS: 77 Suburban parts truck I could use the pb and ps out of it. Would be nice on my 63 Edit: Scratch the pb... I forgot my master cylinder also doubles as the clutch master cylinder. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor Last edited by Stepside65; 10-07-2007 at 02:12 PM.

02-20-2008, 12:00 AM	#9
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: 77 Suburban parts truck Need to finish parting this so I can take it to the crusher. Front door panels are sold and the steering column may be sold. Let me know what you need a pic or price on. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-20-2008, 07:05 AM	#10
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: FS: 77 Suburban parts truck Hey Rick, never heard back from you about the camaros, still interested in selling? __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

07-31-2007, 08:04 PM	#1
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	FS: 77 Suburban parts truck* $600 OBO for the whole thing or let me know what you need and I will post pics and prices. No engine or tranny. May have some of the interior already sold. Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4 Last edited by old Rusty C10; 12-17-2009 at 04:11 PM.

08-07-2007, 03:13 PM	#2
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: FS: 77 Suburban parts truck is the grill crack free? if so, while your in kc you ought to head out to the woodlands or stop by lawrence, haha. Woodlands swapmeet is saturday the 11th __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

02-20-2008, 08:35 AM	#11
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: FS: 77 Suburban parts truck I didnt see this thread until right now... how much for this trim piece to 92345 ??

02-20-2008, 11:39 AM	#14
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: FS: 77 Suburban parts truck Please post parts prices per forum rules... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-21-2008, 12:15 PM	#16
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: FS: 77 Suburban parts truck XI. All For Sale posts shall have a price or prices, as well as your location. No bids or auctions allowed here!!! If you don't know the price of what you are selling, then you should do some research. If a Moderator or Administrator here asks you to post price(s) and you have not within a 12 hour time frame, they will delete your thread, period. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-21-2008, 12:19 PM	#17
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: FS: 77 Suburban parts truck I dont understand...he has a price. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

02-21-2008, 12:54 PM	#18
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: 77 Suburban parts truck He did this to me last time and I lost a couple of sales when the post went away. Please check with Liz, this is okay. I posted a price for the whole truck - which complies with the rules - then I will price individual parts as members tell me what they are interested in. We do this all of the time on the 67-72 parts forum. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-21-2008, 01:09 PM	#19
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: FS: 77 Suburban parts truck PM sent back to ya !!

02-21-2008, 08:05 PM	#21
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: FS: 77 Suburban parts truck Then the question arises- how many parts on a parts truck do you have to price. I have priced several pieces that guys have PM'd me about. So I guess I will list a couple and say sales is pending, that should do it then. Tilt steering column $75 - pending Trim under column $5 - pending - SOLD Trim on DS pillar $5 - pending - SOLD Front Door Panels - SOLD __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4 Last edited by RicksTrucks; 02-23-2008 at 11:42 AM.

02-21-2008, 09:36 PM	#23
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: FS: 77 Suburban parts truck I appreciate your understanding the rules. Just so you are clear on how this works let me offer some examples. If you need further clarifications please let me know. 1.- Example #1 2.- Example #2 __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 02-21-2008 at 09:38 PM.



Register or Log In To remove these advertisements.

02-21-2008, 10:55 PM	#24
Mickey_D Dirteh Kitteh Join Date: Nov 2006 Location: Mormon country Posts: 2,484	Re: FS: 77 Suburban parts truck I'm going to ask a weird one, how much for the ashtray to 56754? I specifically need a working lighter socket, mine is toast and there's no fixing it. I figure the easiest way is to replace the whole moving part of the ashtray, door and all. __________________ Darrin 1955 Willys CJ-5 all original and the oldest CJ-5 on the road. 2001 Dodge Neon (wife's car) 1995 Jeep Grand Cherokee Limited Edition SOLD 1981 K15 Custom Deluxe 4X4, rusty but trusty wood hauler. SOLD 1993 S-10 4X4 Tahoe SOLD Sign up with the Contact List RIP ESLL

Register or Log In To remove these advertisements.