any thing kool to do on a 208 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy68388 · 01-06-2003, 12:08 AM

dont know if u can tell im bored but i was think can u do any thing to a p208 like u can make a 203 to a part time case u can make a 205 in to a front wheel drive with a kit but is there any thing that u can do witha 208

Tuffold72 · 01-06-2003, 02:19 AM

I have heard you can eliminate the slip shaft and go to a fixed yoke. That would be a improvment

ozarkhippie · 01-06-2003, 08:47 AM

If your very bored you could polish the alum. case. lol

chevy68388 · 01-06-2003, 05:21 PM

if i polish it it would just get muddy o well i guess there isnt much to do with this case

Guiltyone · 01-12-2003, 10:27 PM

Too bad it isn't a 203 case, I have my eye on this project:
http://www.offroaddesign.com/catalog/doubler.htm

01-06-2003, 12:08 AM	#1
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	any thing kool to do on a 208 dont know if u can tell im bored but i was think can u do any thing to a p208 like u can make a 203 to a part time case u can make a 205 in to a front wheel drive with a kit but is there any thing that u can do witha 208 __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

01-06-2003, 08:47 AM	#3
ozarkhippie Registered User Join Date: Nov 2002 Location: Eureka Springs AR Posts: 494	If your very bored you could polish the alum. case. lol __________________ Buy Sale or Trade 71 3/4 4x4 72 1/2 ton cheyenne 4x4

01-06-2003, 05:21 PM	#4
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	if i polish it it would just get muddy o well i guess there isnt much to do with this case __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

01-12-2003, 10:27 PM	#5
Guiltyone Registered User Join Date: Dec 2002 Location: Pittsburgh Posts: 19	Too bad it isn't a 203 case, I have my eye on this project: http://www.offroaddesign.com/catalog/doubler.htm __________________ If its on a trailor, it MUST be broke!

01-06-2003, 02:19 AM	#2
Tuffold72 Registered User Join Date: Oct 2002 Location: Oregon Posts: 69	I have heard you can eliminate the slip shaft and go to a fixed yoke. That would be a improvment



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.