The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Welcome and Discussion > Welcome Area

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-09-2009, 09:41 AM   #1
rjDub...
Registered User
 
rjDub...'s Avatar
 
Join Date: Sep 2009
Location: Austin, Texas
Posts: 12
Talking another new guy from Texas...

What's up everybody... =)

Always wanted an old full size truck and finally broke down and got one this weekend... actually found out the guy I got it from is a member on here so if I can figure out how to do a search for his posts I'm gonna do a little digging and hopefully not find out I just bought a POS.

Anyway, it's an '81 K5 Blazer 2wd... kinda rough but I've got high hopes for it. Need to get it dropped asap but I'm trying to do some reading on here before I start asking y'all a bunch of stupid questions.

I've also got a '96 Impala SS I've been working on for the last few years (I should be finishing it instead of starting a new project), a '94 Caprice with the LT1 (basically the same car) that's my daily, and a '69 AMX that's pretty clean but I keep neglecting. =/

Blah blah blah... just wanted to say hi to everybody. Don't wanna bore you... just getting my feet wet. =)

-Reggie
__________________
-'81 K5 Blazer 2wd... new project.
-'96 Impala SS... forged 355(12.25:1CR), LE2 heads & mild custom grind cam, electric WP, full length Quad-1s, dropped on 22s, 4.10s, CPT level 3 tranny w/ Yank stall, lots of mods... never ending project.
-'94 Caprice 9c1... slammed on 20s, 5% tint, basic performance mods... Tri-Y headers, x-pipe, intake, computer tune, shift kit etc. 15" L7, Memphis Amps, Diamond mids & highs... daily beater / project.
-'69 Amx... pretty stock, pretty slow, but pretty. Built tranny w/custom stall, headers & exhaust... blew 401 so it's got weak 360 in it now. Yet another project.
rjDub... is offline   Reply With Quote
Old 09-09-2009, 09:54 AM   #2
jsbgump
Gone Fishing
 
jsbgump's Avatar
 
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
Re: another new guy from Texas...

Welcome to the board from a fellow Texan
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started
2022 Hyundai Tucson Limited
2019 Chevy Traverse Redline Edition Wifes Ride
Build Thread

http://67-72chevytrucks.com/vboard/s...=1#post3483616
jsbgump is offline   Reply With Quote
Old 09-09-2009, 11:03 AM   #3
LOW DOUGH
I'M TRUCK CRAZY!
 
LOW DOUGH's Avatar
 
Join Date: Oct 2006
Location: Sachse, TEXAS
Posts: 1,737
Re: another new guy from Texas...

Welcome from Sachse TEXAS!
LOW DOUGH is offline   Reply With Quote
Old 09-09-2009, 11:17 AM   #4
lvschevytrucks
Unfinished Project Club
 
lvschevytrucks's Avatar
 
Join Date: Jul 2005
Location: Florence S.C.
Posts: 596
Re: another new guy from Texas...

and to the forum from SC
__________________




Handle every Stressful situation like a dog.
If you can't eat it or play with it,
Pee on it and walk away.



1996 Dodge Intreped ES Nice car great on gas

1993 Jeep Cherokee.



Looking for a swb chevy 73-87
lvschevytrucks is offline   Reply With Quote
Old 09-09-2009, 02:04 PM   #5
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
Re: another new guy from Texas...

to the board from Mid-MO!!!

You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more.

I'm glad to hear the PO made sure to pass along the board, and my guess is that if they recommended the site, then they know what they're doing in terms of working on the new Blazer. Be sure to check out the 73-87 message board, and keep us posted on your progress.
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 09-09-2009, 10:20 PM   #6
rjDub...
Registered User
 
rjDub...'s Avatar
 
Join Date: Sep 2009
Location: Austin, Texas
Posts: 12
Re: another new guy from Texas...

Wow... thanks for the warm welcome fellas. I'm used to getting on forums and kinda getting ignored for a while, this is a nice surprise.

I had to Google Sachse Tx btw haha...

72BlckButy: The previous owner actually didn't recommend the board to me, I've just been lurking around here a little while trying to learn some stuff and drooling over y'alls trucks. Just happened to stumble across some pics in the "How about some pics of 2wd Blazers, Jimmy's & Burbs?" thread and was like "Hey, that's my truck!". Small world I guess.

I have a question for y'all though if anybody's still reading this far... when I go to people's profiles and click on "Find all previous posts by..." or "Find all threads started by..." it says I don't have permission or something. What's that about, do I have to have a certain post count to be granted access to certain things? Seen some really nice trucks I wanted to get more info on but that makes it a little bit more difficult.

ANyway, thanks again for the warm welcome... I'm sure I'll be living on this forum for a while. Once I learn my way around you'll probably be sick of me.
__________________
-'81 K5 Blazer 2wd... new project.
-'96 Impala SS... forged 355(12.25:1CR), LE2 heads & mild custom grind cam, electric WP, full length Quad-1s, dropped on 22s, 4.10s, CPT level 3 tranny w/ Yank stall, lots of mods... never ending project.
-'94 Caprice 9c1... slammed on 20s, 5% tint, basic performance mods... Tri-Y headers, x-pipe, intake, computer tune, shift kit etc. 15" L7, Memphis Amps, Diamond mids & highs... daily beater / project.
-'69 Amx... pretty stock, pretty slow, but pretty. Built tranny w/custom stall, headers & exhaust... blew 401 so it's got weak 360 in it now. Yet another project.
rjDub... is offline   Reply With Quote
Old 09-09-2009, 11:28 PM   #7
Jerry Jones
Happy Camper
 
Jerry Jones's Avatar
 
Join Date: Feb 2006
Location: Northern California
Posts: 8,408
Re: another new guy from Texas...

Welcome aboard from Northern California!
__________________
RIP El Jay! Love you brother!
Jerry Jones is offline   Reply With Quote
Old 09-10-2009, 12:46 PM   #8
LOW DOUGH
I'M TRUCK CRAZY!
 
LOW DOUGH's Avatar
 
Join Date: Oct 2006
Location: Sachse, TEXAS
Posts: 1,737
Re: another new guy from Texas...

Yep, Sachse, just north east of Dallas.

I am wondering why your post count is staying at 0... Maybe that is why you can't look the info up. Maybe try posting something in the 73-87 section. Maybe you just need to show one post... Maybe you don't increase your post count by posting in the "Welcome area". I have never paid attention to it.


Post pics up in that section. And Once again WELCOME to the board. It is a great place with very nice people and lots of knowledge.
LOW DOUGH is offline   Reply With Quote
Old 09-10-2009, 12:47 PM   #9
LOW DOUGH
I'M TRUCK CRAZY!
 
LOW DOUGH's Avatar
 
Join Date: Oct 2006
Location: Sachse, TEXAS
Posts: 1,737
Re: another new guy from Texas...

It doesn't increase it seams.
LOW DOUGH is offline   Reply With Quote
Old 09-10-2009, 12:48 PM   #10
jholley
Registered User
 
jholley's Avatar
 
Join Date: Jul 2008
Location: TX
Posts: 737
Re: another new guy from Texas...

from Waco
__________________
-------------------------------------------------

Jim


Garage fillers...

85 Chevy C10 Silverado LWB
07 Nissan Altima
2006 Mini Cooper S
jholley is offline   Reply With Quote
Old 09-10-2009, 12:49 PM   #11
rbeau30
Registered User
 
rbeau30's Avatar
 
Join Date: Sep 2009
Location: Aurora, CO
Posts: 65
Re: another new guy from Texas...

My count still shows "0" as well.
rbeau30 is offline   Reply With Quote
Old 09-10-2009, 01:33 PM   #12
rbeau30
Registered User
 
rbeau30's Avatar
 
Join Date: Sep 2009
Location: Aurora, CO
Posts: 65
Re: another new guy from Texas...

I had to post outside the "Noob" area, for my post count to start.
rbeau30 is offline   Reply With Quote
Old 09-11-2009, 07:56 AM   #13
rjDub...
Registered User
 
rjDub...'s Avatar
 
Join Date: Sep 2009
Location: Austin, Texas
Posts: 12
Thumbs up Re: another new guy from Texas...

Thanks Low Dough... that explains it, I was wondering why my post count wasn't going up. I've been holding off on posting anything in the other sections just so I wouldn't bother people with dumb questions I can search for but I'm kinda unclear on a few things so I may do that right now. Appreciate the help... everybody on here's been really nice so far.

Thanks to Rbeau30 too... I noticed a few other people's post counts not going up so I didn't think much of it, I've only really been paying attention in the Welcome section since the post counts are lower though so glad to hear it worked for you.

-Reggie
__________________
-'81 K5 Blazer 2wd... new project.
-'96 Impala SS... forged 355(12.25:1CR), LE2 heads & mild custom grind cam, electric WP, full length Quad-1s, dropped on 22s, 4.10s, CPT level 3 tranny w/ Yank stall, lots of mods... never ending project.
-'94 Caprice 9c1... slammed on 20s, 5% tint, basic performance mods... Tri-Y headers, x-pipe, intake, computer tune, shift kit etc. 15" L7, Memphis Amps, Diamond mids & highs... daily beater / project.
-'69 Amx... pretty stock, pretty slow, but pretty. Built tranny w/custom stall, headers & exhaust... blew 401 so it's got weak 360 in it now. Yet another project.
rjDub... is offline   Reply With Quote
Old 09-11-2009, 01:51 PM   #14
rjDub...
Registered User
 
rjDub...'s Avatar
 
Join Date: Sep 2009
Location: Austin, Texas
Posts: 12
Question Re: another new guy from Texas...

Hmmm... does anybody know if there's a certain number I need to hit to be able to find other posts by someone? I started a thread in the Blazer section and chimed in on another one but still not having any luck.

Don't wanna run around giving generic comments just to get my post count up like "nice truck", "looks good", "subscribed"... ya know? If I don't have something legit to say or contribute on forums I usually keep my mouth shut. =/

If that's what it takes I can do that though...
__________________
-'81 K5 Blazer 2wd... new project.
-'96 Impala SS... forged 355(12.25:1CR), LE2 heads & mild custom grind cam, electric WP, full length Quad-1s, dropped on 22s, 4.10s, CPT level 3 tranny w/ Yank stall, lots of mods... never ending project.
-'94 Caprice 9c1... slammed on 20s, 5% tint, basic performance mods... Tri-Y headers, x-pipe, intake, computer tune, shift kit etc. 15" L7, Memphis Amps, Diamond mids & highs... daily beater / project.
-'69 Amx... pretty stock, pretty slow, but pretty. Built tranny w/custom stall, headers & exhaust... blew 401 so it's got weak 360 in it now. Yet another project.
rjDub... is offline   Reply With Quote
Old 09-11-2009, 03:09 PM   #15
oj70chevy
250 V-6 Club
 
oj70chevy's Avatar
 
Join Date: Feb 2005
Location: San antonio, TX.
Posts: 898
Re: another new guy from Texas...

[QUOTE=rjDub...;3513408]Hmmm... does anybody know if there's a certain number I need to hit to be able to find other posts by someone? I started a thread in the Blazer section and chimed in on another one but still not having any luck.


It works for me may be you need to be paid up (registered) and in blue? And Welcome from San Antonio!!!!
__________________
1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523
Never ask a stupid question unless you want a stupid answer .
oj70chevy is offline   Reply With Quote
Old 09-12-2009, 12:21 AM   #16
rjDub...
Registered User
 
rjDub...'s Avatar
 
Join Date: Sep 2009
Location: Austin, Texas
Posts: 12
Re: another new guy from Texas...

Damn... hope that's not the case. Trying to save my lil chips to get this truck together. Good thinking though... I do have that pink thing going for me , didn't even notice til you said that. Thanks for the input... sweet C10 btw, wow. Very clean.
__________________
-'81 K5 Blazer 2wd... new project.
-'96 Impala SS... forged 355(12.25:1CR), LE2 heads & mild custom grind cam, electric WP, full length Quad-1s, dropped on 22s, 4.10s, CPT level 3 tranny w/ Yank stall, lots of mods... never ending project.
-'94 Caprice 9c1... slammed on 20s, 5% tint, basic performance mods... Tri-Y headers, x-pipe, intake, computer tune, shift kit etc. 15" L7, Memphis Amps, Diamond mids & highs... daily beater / project.
-'69 Amx... pretty stock, pretty slow, but pretty. Built tranny w/custom stall, headers & exhaust... blew 401 so it's got weak 360 in it now. Yet another project.
rjDub... is offline   Reply With Quote
Old 09-13-2009, 12:56 AM   #17
sixty-eight shorty
Registered User
 
sixty-eight shorty's Avatar
 
Join Date: Sep 2005
Location: ft worth, tx / azle ,tx
Posts: 154
Re: another new guy from Texas...

welcome from ft worth texas .
sixty-eight shorty is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com