73 Squarebody Suspension Recommendations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 01-26-2022, 02:42 PM

Don't forget one of the original outfits that designed components to help move these trucks around corners faster.... No Limits Engineering. Before TCI, Qa1, or Heidts made 'kits' for these trucks, if 'maximum handling' was your goal, No Limits was a go-to.

Another option you might not know about is Detroit Speed. They now make front & rear bolt-in set-ups for C10's.

williamgdonovan · 01-26-2022, 03:26 PM

Quote:

Originally Posted by SCOTI

Don't forget one of the original outfits that designed components to help move these trucks around corners faster.... No Limits Engineering. Before TCI, Qa1, or Heidts made 'kits' for these trucks, if 'maximum handling' was your goal, No Limits was a go-to.

Another option you might not know about is Detroit Speed. They now make front & rear bolt-in set-ups for C10's.

Appreciate the input. I will give them some consideration.

SCOTI · 01-26-2022, 04:16 PM

There's a wide range in 'difference' regarding these trucks ability to handle.

Are you planning/building for some Track Time or Cone-Killing?

williamgdonovan · 01-26-2022, 04:52 PM

Quote:

Originally Posted by SCOTI

There's a wide range in 'difference' regarding these trucks ability to handle.

Are you planning/building for some Track Time or Cone-Killing?

Plan is to run an LS and daily drive but also want to be able to do some track days/autocross.

01-26-2022, 02:42 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,917	Re: 73 Squarebody Suspension Recommendations Don't forget one of the original outfits that designed components to help move these trucks around corners faster.... No Limits Engineering. Before TCI, Qa1, or Heidts made 'kits' for these trucks, if 'maximum handling' was your goal, No Limits was a go-to. Another option you might not know about is Detroit Speed. They now make front & rear bolt-in set-ups for C10's. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-26-2022, 04:16 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,917	Re: 73 Squarebody Suspension Recommendations There's a wide range in 'difference' regarding these trucks ability to handle. Are you planning/building for some Track Time or Cone-Killing? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.