The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-22-2014, 08:58 PM   #1
ledfut72
Registered User
 
Join Date: Apr 2014
Location: KIln, MS
Posts: 9
Big block pros/cons?

I've got a '56 Chevy 3800 that currently has an old welding flat bed on the back. My overall goal is to make a hauler out of it to go to shows with. I've got a big block to go in it and plan to use it. If anyone has put one in there's, would you mind giving me a few pointers or at least some heads up on some of the problems I might run into. Any recommendations will be helpful as well. Thanks in advance.


Brad
ledfut72 is offline   Reply With Quote
Old 04-22-2014, 09:04 PM   #2
ledfut72
Registered User
 
Join Date: Apr 2014
Location: KIln, MS
Posts: 9
Re: Big block pros/cons?

Here it is.
Attached Images
 
ledfut72 is offline   Reply With Quote
Old 04-23-2014, 07:50 AM   #3
jelfert
Registered User
 
Join Date: Apr 2014
Location: houston, texas
Posts: 16
Re: Big block pros/cons?

Pro- you already have one in hand. They can make big torque at lower rpms.
Those trucks have plenty of room to mount one.
Con - more fuel consumption. Probably not a big deal depending on how much u drive it.
jelfert is offline   Reply With Quote
Old 04-23-2014, 08:22 AM   #4
la hi
Registered User
 
Join Date: Oct 2011
Location: Pagosa Springs, CO
Posts: 162
Re: Big block pros/cons?

new bb radiator, new radiator mount, wrap your headers, probably need electric fans/w/shroud as fan probably will not fit. Those are pros, as someone always says on this forum "you can't get too many ci's"
larry 57 454
la hi is offline   Reply With Quote
Old 04-23-2014, 11:35 AM   #5
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Big block pros/cons?

More torque and power. Now, what's the problem?

From what I've seen they fit into a Task Force style truck pretty well.

Loaded I'd think you would get just as good and maybe better gas mileage than a small block pulling the same load. Not spectacular but passable for what you have and what you are doing. And it will climb a grade a lot better. With my small block pulling my boat I am way way over in the slow lane getting passed by VW micro Buses on long grades.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 04-23-2014, 11:54 AM   #6
buggy5872
Senior Member
 
buggy5872's Avatar
 
Join Date: Jun 2011
Location: North Beaver TWP PA
Posts: 833
Re: Big block pros/cons?

I went from a small block to a big block in Big Bertha. I got 9 mpg with the small block towing 11k lbs trailer. I get 9 mpg towing with the big block going 15mpg faster up the hills. I did lose 2 mpg empty but 90% of the time I am towing. I would go with the big block
__________________
___________________________
1959 Apache Short Fleetside,
1959 Apache NAPCO Long Stepside,
1957 3100 with 59 fleetside bed
1957 5700 LCF Crew Cab "Big Bertha",1959 GMC F370
1958 GMC 600, 1946 Chevy, 1959 Viking 60 LCF
1974 Elcamino SS, 1979 6500 GMC Tilt Bed Wrecker
Big Bertha Build
buggy5872 is offline   Reply With Quote
Old 04-23-2014, 04:47 PM   #7
Stepside Jim
Registered User
 
Join Date: Aug 2012
Location: Salem Mo
Posts: 644
Re: Big block pros/cons?

One thing that's not mentioned is whether the sub frame will changed or not. If something like a Camaro subframe is done I'm not sure if the sitting height of the engine changes.

I'm saying this also for if the original steering box gets in the way for the exhaust, I see some with small blocks having to work with the steering box sometimes.

Other than that there is plenty of side space. The only issue is between the firewall and radiator. I left about an inch between the valve covers and firewall, this, even with the short water pump, didn't leave much space for a mechanical fan. The optimum way for me was a dual electric fan, the water pump pulley fit between the two electric fan motors.

This picture gives an idea of the front fit.


And a front view, mine does have a Camaro front on it.


As I mentioned, I'm not sure how it settles in with a stock frame, someone else my have that answer.
__________________
My 57 Chevy truck build.http://67-72chevytrucks.com/vboard/s...d.php?t=541132
Stepside Jim is offline   Reply With Quote
Old 04-26-2014, 10:01 AM   #8
ledfut72
Registered User
 
Join Date: Apr 2014
Location: KIln, MS
Posts: 9
Re: Big block pros/cons?

Thanks everyone. I like the idea of two fans. Makes a lot of sense. Since it's a 1 ton truck, I was thinking about leaving the stock front end under it, but new springs. I know that the I-beam should be plenty sturdy enough. But I'm definitely going with a power steering set up.
ledfut72 is offline   Reply With Quote
Old 06-22-2015, 09:07 PM   #9
CUCV2
Registered User
 
CUCV2's Avatar
 
Join Date: Nov 2009
Location: Central, VT
Posts: 39
Re: Big block pros/cons?

Thinking of putting a 454 Vortec in my 1959 GMC. I am concerned about the steering box clearance and how it will fit towards the firewall. Does anyone have any better pics of this?
__________________
-59 GMC Garage Ornament
CUCV2 is offline   Reply With Quote
Reply

Bookmarks

Tags
1 ton, 3800, 454, big block, flat bed

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com