The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-15-2015, 03:09 PM   #1
woodwright
Enjoying left field
 
woodwright's Avatar
 
Join Date: Jun 2008
Location: Dillon Montana
Posts: 900
Engine sources

Those of you that are doing LS engine swaps for a living, where are you sourcing your engines? They are apparently gold plated here.
__________________
Clint

70 Chevy 4WD "Ultimate Work Truck" SOLD
woodwright is offline   Reply With Quote
Old 05-15-2015, 04:12 PM   #2
GMC-YA68
Senior Member
 
GMC-YA68's Avatar
 
Join Date: Mar 2004
Location: Lee's Summit, MO (KC)
Posts: 742
Re: Engine sources

I got mine at a local wreck yard. Heard it run before they pulled it.

LKQ online usually has stashes of these things on ebay.

You say they are gold plated up there. What are they asking for them? details/mileage/full accessories. etc.
__________________
-Keegan-

'72 Jimmy 4x4 - 5.3/4L65E/NP205 swap
http://67-72chevytrucks.com/vboard/s...d.php?t=663780
GMC-YA68 is offline   Reply With Quote
Old 05-15-2015, 06:27 PM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,595
Re: Engine sources

LQK seems to be the go to place for them around here. Hard to get one at the drop of a hat.. most of the time they got waiting lists for the better ones.
mongocanfly is offline   Reply With Quote
Old 05-15-2015, 06:50 PM   #4
KEWLKATDADY
Registered User
 
Join Date: Sep 2014
Location: Mansfield TX
Posts: 71
Re: Engine sources

I watched craigslist for 2 months...
"Chevrolet 2500hd 6.0"

I found a broke down truck with 200K for $1000.

stripped the motor, trans, ecu and harness and sold the chassis and body for $800

__________________
1967 C10 custom
KEWLKATDADY is offline   Reply With Quote
Old 05-15-2015, 07:13 PM   #5
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 956
Re: Engine sources

I found my setup on eBay.
jessemthompson is offline   Reply With Quote
Old 05-15-2015, 07:19 PM   #6
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,595
Re: Engine sources

If you got connections a dealer auction is a good place but you got to have a dealer liscence..I know a guy that bought a caddy that had minor fire damage at one for $800..turned around stripped and sold $2000 worth parts and kept the ls and 6spd to go in camaro...I can't ever have that luck.
mongocanfly is offline   Reply With Quote
Old 05-16-2015, 02:20 AM   #7
woodwright
Enjoying left field
 
woodwright's Avatar
 
Join Date: Jun 2008
Location: Dillon Montana
Posts: 900
Re: Engine sources

Spaldings is right here in Spokane. They want anywhere from $2000 to $10000 for a complete drop out. They are the only yard in 300 miles that has newer vehicles.
__________________
Clint

70 Chevy 4WD "Ultimate Work Truck" SOLD
woodwright is offline   Reply With Quote
Old 05-16-2015, 02:27 AM   #8
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,595
Re: Engine sources

$10000....ouch....you'd be better off to buy a whole good running truck and strip it down...that's unreal..
mongocanfly is offline   Reply With Quote
Old 05-16-2015, 07:14 AM   #9
LeesTruk
Registered User
 
Join Date: Mar 2015
Location: Manchester, CT
Posts: 429
Re: Engine sources

When I went shopping for my 5.3, I went to ebay and made a selection from Bow Auto out of New Hampshire. Very good people to deal with, the price was good, and it was a complete drop-out package. The engine arrived within a work week, on a truck with a drop gate (my request), the driver put his hand truck under the pallet and put the engine right in my garage for me. The engine was very securely palleted and wrapped in plastic wrap to keep all the components together. The engine had been degreased and was theoretically ready for install. All with a 6mo. warranty

Lee
LeesTruk is offline   Reply With Quote
Old 05-16-2015, 03:30 PM   #10
woodwright
Enjoying left field
 
woodwright's Avatar
 
Join Date: Jun 2008
Location: Dillon Montana
Posts: 900
Re: Engine sources

The $10000 was for a 2014 camaro engine and trans with 0 miles. We have a little bit of a hotrod community here. Today was the annual Lost in The 50s car show. There was about a dozen LS swaps there. Last year there was 2.
__________________
Clint

70 Chevy 4WD "Ultimate Work Truck" SOLD
woodwright is offline   Reply With Quote
Old 05-18-2015, 08:18 AM   #11
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,540
Re: Engine sources

board vendor:http://67-72chevytrucks.com/vboard/s...d.php?t=669725
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 05-18-2015, 12:01 PM   #12
Matt Cramer
Registered User
 
Join Date: Apr 2012
Location: Covington, GA
Posts: 386
Re: Engine sources

I don't do the swaps for a living, but if you're OK with using 4.8s, try your local U-Haul service center. The one near me has a huge stack of 4.8s that they pulled from wrecked trucks, and were asking $500 for a fully dressed example (no ECU, but otherwise complete).
__________________
Matt Cramer
1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD
4.8 LS build thread
Matt Cramer is offline   Reply With Quote
Old 05-19-2015, 11:18 AM   #13
Angryman117
Registered User
 
Join Date: Jul 2013
Location: VAFB, CA
Posts: 227
Re: Engine sources

Craigslist, I found a 2004 with 87K for $300 with wire harness. I also know a place in MN that has them for a good price.
__________________
Angryman117's
47 Chevy Build
89 Silverado Z71 LS Swap (sold)
Angryman117 is offline   Reply With Quote
Old 05-19-2015, 02:05 PM   #14
MalibuSSwagon
Registered User
 
Join Date: Sep 2009
Location: Weare,NH
Posts: 1,589
Re: Engine sources

Bought a complete running truck, rotted and wrecked but ran great. Parted it out and had most parts sold within a week. I'm $200 in now, and once I scrap the cab and chassis I should be even.

Also, try the local insurance auctions. Near me they had several Silverados for sale at a buy it now price of $650, even some 6.0L trucks. Issue is you either need to have a dealer license or buy thru a broker. Could still be a good deal even after the fees, I just decided to skip the hassle and buy a rotted junker off craigslist, plenty of those around here.
MalibuSSwagon is offline   Reply With Quote
Old 05-19-2015, 08:07 PM   #15
Tilt
Registered User
 
Join Date: Jul 2014
Location: Dayton, TX
Posts: 335
Re: Engine sources

I found a 2004 Cadillac Escalade ESV Platinum with the LQ9 with 132K miles on Craigslist for $2000. The fuel pump was bad, swapped it out and it fired up and ran like a champ. I kept the engine and everthing I would need for my swap and then some and parted out what was left for around $4000 and I still have a few parts left to sell.
__________________
'83 Silverado Step Side
'85 GMC short bed.
'86 Chevy Step Side Custom Deluxe
LQ9/4L80 swap (SOLD)
Tilt is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:18 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com