|
05-16-2002, 12:00 AM
|
#1 |
|
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Hello all
I guess I should introduce myself as I'll be here quite a bit in the forseable future as my project is in its infancy. A few months ago I was going through my brothers storage locker and I found a forged steel 350 crank I had ground 12 years or so ago and I thought it would be good to build up a 350 around except I was missing a 350 and a chevy to put it in . So I bought myself a really nice 4 bolt block, had it bored and decked , got a new set of scat 4340 I beam rods, some .125 domed HE pistons, a new set of world product sportsman II casting heads, an edelbrock torker cam and a rpm air gap manifold with a bunch of chrome and stuff to tie it all up,had it all balanced and bolted it u with all ARP pro series hardware. .then went out looking for a truck to put it in. I looked in the paper and found a 68' C20 long bed for $700. I thought it had to be a basket case but I went over to look at it. As soon as I saw it I told the guy I'd take it for $500 . Didnt even test drive it. The guy thought I was nuts. He agreed and I drove it home. It was rust free, reasobly straight with original paint and all and NEVER wrecked, all original with factory air conditioning , power brakes, power steering and the original 396-4 speed all intact. So I committed sacriledge or something like it and yanked the 396 and promptly sold it off for $1000 to help defray the cost of the new wheels and tires I bought for it and installed my nice 420 or so horsepower small block. It runs like a champ . So now I'm broke until overtime season comes around at work so I'm doing the labor intensive sanding etc. Funny thing though. The other day I was changing the carpet out as the original was growing mold under the seat and my neightbor whom I have never met before comes over and starts talking about the '70 he used to have but wrecked a few years ago. Then he said he had a new interior set that he had made just before he wrecked it and asked if I wanted it. I asked him what he wanted for it. " just get it out of my garage" he said. All new reupholstered in grey velour with new foam with matching door panels in like new condition and I had it bolted in the same day. I'm calling this my lucky truck! Ive had it less than 4 weeks but its moving along pretty fast. I havent decided what to paint it yet but I'm leaning towards ....I dont know yet but the factory gold and white has got to go.
[This message has been edited by mikep (edited May 16, 2002).] [This message has been edited by mikep (edited May 16, 2002).]
__________________
No truck :-( |
|
|
|
05-16-2002, 12:34 AM
|
#2 |
|
Recovering Truck Driver
Join Date: Mar 2002
Location: Orleans, NE USA
Posts: 1,883
|
Welcome to THE board, you will be able to find alot of great information here to help you along with your new baby. Why can't I ever find deals like that???....Is that 68 a 50th anniversary?? It's totally up to you of course, but if it is a 50th, I personally would keep the gold and white colors just because of what it is. Man, i wish i could find a deal like that.
------------------ "In the words of Motley Crue, This will always be my home sweet home" Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s Angel girl: 67 Cutlass convertible 330, 3spd stick Greener: 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE no name yet: 72 442 under serious construction my site: http://communities.msn.com/Beastonabudget/homepage
__________________
67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska |
|
|
|
|
05-16-2002, 03:06 AM
|
#3 |
|
Registered truck nut
Join Date: Dec 1999
Location: Mt. Vernon, Washington, USA
Posts: 1,584
|
Welcome. Good to see another Washingtonian
------------------ MOUNT VERNON, WASH. STATE GOT MY BASES COVERED -Big and bad 70 CST Blazer -71 K5 Blazer, 350, 4spd, 2" lift, 35" BFG mudders, Camo, -Work in progress 72 SWB -72 Cheyenne, lwb, 1/2 ton, 4x4, V8, 4spd. -71, 3/4 ton, 402/400, Custom Camper -69, 2wd, ST6, auto, ghetto lowered, 3/4 ton, LWB, "BOMBER" -69 Chev. short narrow 4x4 -69 Chev., lwb, utility trailer, 35" tires, Add or Delete Daily
__________________
MOUNT VERNON, WASH. STATE Need a part? Just PM me |
|
|
|
|
05-16-2002, 06:20 AM
|
#4 |
|
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
I dont see anything on the RPO list about 50th anniversary. How can I tell if it is?I dont have the build sheet from behind the seat . I actually do but its in a few thousand pieces . It did come with the original warranty booklet with the protect-o-plate and the original owners manual. It was an old guy who sold it to me. He couldnt get the headlights to work and didnt want to pay to have a shop diagnose the problem. He had forgotten to plug them in is all. I felt bad in a way taking the truck for that much but the guy was such a jerk I didnt feel that bad.
Thats the thing about washington. You see these trucks all over the place. The climate is pretty easy on them and theyre not quite a dime a dozen but close. I tell people what they go for in other parts of the country and the laugh at me.
__________________
No truck :-( |
|
|
|
|
05-16-2002, 06:27 AM
|
#5 |
|
Registered User
Join Date: Dec 2000
Location: Centerville Ga. USA
Posts: 804
|
Great story, man you must have a golden horseshoe shoved up your *SS LOL...Welcome aboard the board!
------------------ 68 SWB The Surgeon General doesn't say anything about smoking a Ford!!! Would rather be ran over repeatedly by a Chevy than drive a Ford!!! Paralyzed from the neck up and confined to a hat!
__________________
68 SWB The Surgeon General doesn't say anything about smoking a Ford!!! Would rather be ran over repeatedly by a Chevy than drive a Ford!!! Paralyzed from the neck up and confined to a hat! Kathleen, Georgia USA |
|
|
|
|
05-16-2002, 06:33 AM
|
#6 |
|
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
Welcome to the board!
 Sounds like you got an awsome deal. Don't know much about the numbers, but I do know that 50th anniversory trucks where gold and white and had gold and white interior. ------------------ Yeah, that's right. My name is Randy too! WWW.Randysrods.freeservers.com 1970 Chevy C-10 shortstep 30 Ford Model A Coupe 4 inch chop, 350, GMC 671 blower-Hell yeah it's fast! 87 Harley Sportster(couldnt get a 350 to fit) Self Propelled Lawn Mower Built in USA!!!! Virginia Beach, VA. |
|
|
|
|
05-16-2002, 08:51 AM
|
#7 |
|
Senior Moment
 
Join Date: Mar 2002
Location: Pittsburg Ca
Posts: 4,085
|
Welcome from Northern Ca. Any pictures of your prize?
------------------ Steve's 70 CST 02 Burb (wifes Truck) www.picturetrail.com/70CST
__________________
1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565 |
|
|
|
|
05-16-2002, 08:54 AM
|
#8 |
|
Senior Member
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,747
|
A BIG WELCOME from BIG ORANGE upper S.C.
------------------ 1971 chevy suburban (BIG ORANGE) 1970,68,90 swb Little BUCKS one day 67/72 truck parts bought/sold LIFE IS GOOD,THANK GOD FOR IT!
__________________
Things happen for a reason! |
|
|
|
|
05-16-2002, 09:23 AM
|
#9 |
|
Registered User
Join Date: Oct 2000
Location: St. Johns, Arizona
Posts: 2,660
|
Mike, look on the glovebox sticker and post the paint codes. Sounds like you have a 50th anniversary there. If the paint is 551 Gold/Ivory, then it should be an anniversary...
If it is, then you'll make me cry when you don't paint it gold/ivory! Post some pics too! ------------------ Bowen '68 K20 fleet '69 K10 swb fleet '72 C10 lwb step '72 K10 Suburban
__________________
my 2˘ - t.i.o.l.i. Bowen 1968 K20 fleet 1969 K10 swb fleet 1972 K10 Suburban 1972 C10 lwb step 1992 K1500 'burb 1995 K2500 'burb 1997 C1500 'burb 1999 K1500 2000 K1500 'burb Why do I own so many Suburbans? |
|
|
|
|
05-16-2002, 09:37 AM
|
#10 |
|
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Oh man...welcome from Kent, WA. Don't paint over that gold and white. Look at some pictures of that 50th Anniversary restorations and you will certainly have to reconsider. Too bad about intalling the new interior in gray! Now you will have to buy another truck for the interior, especially after your neighbor gave it to you...what a guy! I hope you did something nice for him! Don't miss the Monroe Swap meet this weekend...bring your truck!
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
|
|
|
|
05-16-2002, 10:18 AM
|
#11 |
|
Collector of rusty Items
Join Date: Dec 2001
Location: Sisters,Oregon USA
Posts: 731
|
Obviously you are jinxed! You better get rid of that truck and fast before somebody offers to do a free 4x4 conversion.
I will be glad to take it off your hands and save you from any further misery. Welcome from beautiful Sisters Oregon, Home of the Sisters Rodeo. ------------------ Scrub 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.
__________________
Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends. |
|
|
|
|
05-16-2002, 11:34 AM
|
#12 |
|
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Yep. Its 551 white and ivory all right. anyone got a pic of a repainted one. This paints shot to hell so its hard to see what it would look like if it were decent. I'll take some pics tonight. I was hoping to dechrome and paint black on top and boittom with a neutral color in the middle but I'm not so sure. harder than picking a babies name chosing a color.
__________________
No truck :-( |
|
|
|
|
05-16-2002, 04:34 PM
|
#13 |
|
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
Welcome from Connecticut!
------------------ 1971 C10 swb stepside 350/700R4/3.73posi Killingworth, Connecticut
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
|
|
|
|
05-16-2002, 05:10 PM
|
#14 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
welcome to the forum,.
cant believe you did that to a 50th all original BB truck, thats totally insane.,,,,,, damn... glad im farrrrrr away from that... good luck finding another like it.,, ------------------ Randy- Lincoln, IL randy@ccaonline.com 2177353230 *many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme and 84 SE Firebird T5 3.73 current fleet: -71 C-10 350/CH465/3.07- assembling currently -90 Cavalier/2.2/sky blue, driver #2 -84 Z28 5.0L/700R4/3.73 daily driver #1 -'90 Corsica 3.1L and '82 purple Trans Am- storing *Paint is overrated* © RSS Enterprises 2000 [This message has been edited by Fast68Chevy (edited May 16, 2002).] |
|
|
|
|
05-16-2002, 05:22 PM
|
#15 |
|
I need another Barley Pop
Join Date: Feb 2001
Location: Grants Pass, OR
Posts: 1,629
|
Welcome from Southern Oregon!
------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR
__________________
67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness" 
|
|
|
|
|
05-16-2002, 06:48 PM
|
#16 |
|
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Like I knew a 50th anniversary big block truck from my butt when I bought it. The only reason I bought it was because it was cheap and I figured I could recoup a bit by selling the motor and this motor I put it in is one Iv'e been kicking around in my head for the last 20 years. It's got 400+ horsepower on a bad day , gets better than 10 mpg and has gobs of torque. A cast crank weak bottom end 396 would only leave me unsatisfied and wishing I had a 454. I have no intention on doing a concourse resto so I'm building the truck I want not the one chevrolet built 35 years ago.
If anyone wants to step up to trade me a late 60's/early 70's 2 wheel drive blazer with no motor for this truck without the wheels and tires and engine I'm all over it. I'll even give you the number of the guy who has the original 396 so you can buy it back from him. Otherwise I'm building it my way. <img src="http://images.fotki.com/v5/free/a111/3/3412/5484/truck-vi.jpg?1021592691"> <img src="http://images.fotki.com/v5/free/a111/3/3412/5484/inside-vi.jpg?1021592743"> <img src="http://images.fotki.com/v5/free/a111/3/3412/5484/engine-vi.jpg?1021592775"> [This message has been edited by mikep (edited May 16, 2002).]
__________________
No truck :-( |
|
|
|
|
05-16-2002, 06:56 PM
|
#17 |
|
Led Sled! Discs R 4 ME!
Join Date: Jan 2001
Location: Toms River, NJ, USA (Transplanted Hoosier)
Posts: 7,327
|
here ya go..and welcome!
   ------------------ Toms River NJ (Transplanted Hoosier) 56 working Street Rod(under construction 71-2 coil chassis) Give a man a fish and he will eat for a day. Teach him how to fish and he will sit in a boat & drink beer all day. |
|
|
|
|
05-16-2002, 06:59 PM
|
#18 |
|
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
I dont know why I couldnt figure the picture posting thing out. Its been a while I guess
Thanks
__________________
No truck :-( |
|
|
|
|
05-16-2002, 07:00 PM
|
#19 |
|
Led Sled! Discs R 4 ME!
Join Date: Jan 2001
Location: Toms River, NJ, USA (Transplanted Hoosier)
Posts: 7,327
|
BTW, SWEET truck. Ya got a good start!
to post an image do what I did below with NO spaces... [ img] past url here [/ img] |
|
|
|
|
05-16-2002, 08:19 PM
|
#20 |
|
SLOW BUT SURE,BUT CLOSER
Join Date: Feb 2002
Location: eleanor wv usa
Posts: 3,091
|
GOOD TO HAVE YOU ON BOARD,FROM GOOD OLE' WEST VA. looks like you have a good start.
__________________
69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS....... 
|
|
|
|
|
05-16-2002, 08:58 PM
|
#21 |
|
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
did I mention the absolutely dent and rust free bed and sidewalls?
I'm a bad man!
__________________
No truck :-( |
|
|
|
|
05-16-2002, 09:10 PM
|
#22 |
|
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Where you from Big Orange. I grew up in Simpsonville SC and if you hail from upstate SC you might know where thats at.
BTW anyone know where I can get new side trim for a 68? I havent been able to find a complete set from any of the parts houses. [This message has been edited by mikep (edited May 16, 2002).]
__________________
No truck :-( |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
