Air compressor problem.

[donthekawguy]

I got my new to me compressor today (Champion 80 gallon). While we were unloading it, the air fitting holding the inline driers broke off. The tube that screws into the fitting on the side of the tank is broken off inside the fitting with no threads sticking out so I can't grab on to get it out. The big fitting is also stuck in the tank and I have already broken my adapter trying to get it out. lol I don't think I will be able to get it out with a punch because it's been in there so long. I have spray it with penetrating oil so that might help. Any tool that I can get that will reach in there and grab the pipe to turn it?

[dwcsr]

You should be able to go to a plumbing supply and get an easy out for pipe. A picture would be helpful to see what you could use

[mongocanfly]

Yep..Sounds like you need a ease-out..but like dwcsr..get a pic..

[donthekawguy]

I went to the store and got one of those easy out for pipe tools. Broke it. Got another bent it. lol Pipe extractor i think is what they are called. Anyway, I think I'm going to put some heat to it and give it one more try. If it doesn't work, I work with a guy who is a plumber and he should have the heavy duty set of those things that will work.

[mongocanfly]

If you got one of those square ones you wasted your money..they break easily..the best ones are the screw type

[donthekawguy]

I used this type. Didn't even budge it. lol

[cdowns]

I would not waste any more time or money on the problem me i'd just dtill and tap a new hole

[mongocanfly]

This is the style I was talking about..