Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-18-2024, 10:13 PM | #1 |
Registered User
Join Date: Jan 2024
Location: Tampa, Fl
Posts: 10
|
Rosie, a '62 GMC Carryall
My favorite aunt passed away about a year, year and a half back. She left me Rosie.
Rosie is a west coast Carryall that is perched on a squarebody frame. Some sort of GM Crate motor, 4L80E, air-lockers, all the toys. My uncle-in-law's son owned her, drove her to Alabama, then went off to god-knows-where and passed away. Uncle passed away, so Rosie was sitting for 6ish years when I got her. Took some workin, but I got her to idle https://www.youtube.com/watch?v=kYrl-VEBVPY About a month later I got her running well enough to drive to the gas station and fill her up. https://www.youtube.com/watch?v=wJ7l_QAe_Ng Going up this weekend to work on her some more, get her more reliable and hopefully be able to get her registered and insured. Lots of rust that I need to address (that you can see) and I need to figure out the mechanism for the rear-door so I can replace the lock and lube up the latch. |
07-19-2024, 06:57 PM | #2 |
Senior Member
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,842
|
Re: Rosie, a '62 GMC Carryall
Welcome to the Forum, Mr. ASA!
Beautiful GMC Carryall and would love to see more photos. Hey there Rosie
__________________
MusicMan70 1961 GMC Suburban |
07-23-2024, 08:07 PM | #3 |
Registered User
Join Date: Jan 2024
Location: Tampa, Fl
Posts: 10
|
Re: Rosie, a '62 GMC Carryall
Some random photos:
The entire rockers look like this, basically. California vehicle, driven on the beach I'm sure. Hooking her up to tow down to Florida At Dad's place As I mentioned, the engine is some flavor of GM Crate engine. One of these days I'll track down the code on it. Not 100% sure what kind of frame she's on, but based on the shocks and a few other things, likely a squarebody? Dog pic |
07-23-2024, 08:08 PM | #4 |
Registered User
Join Date: Jan 2024
Location: Tampa, Fl
Posts: 10
|
Re: Rosie, a '62 GMC Carryall
I would love any and all info anyone has on the rear-door and getting the mechanism to work and door to open. I presume I need to crawl through there and take the panel off so I can manually manipulate the rods?
|
09-09-2024, 07:22 AM | #5 |
Junior Member
Join Date: Feb 2022
Location: Union Grove Alabama
Posts: 97
|
Re: Rosie, a '62 GMC Carryall
Mr Asa, (and anyone else reading this, I am going to be in the market for a 60-66 solid patina or lightly restored suburban like this, and really like a GMC and especially one in Palomino Tan like this so despite the modifications from stock I don't care for, I would like to know if and when you decide to sell or if anyone reading is holding something not publicly for sale but could be bought - no primer please - not looking to paint one - want one either in original / patina shape all one color all the way around or one repainted at some point to a favorable color or factory color. Text or call 256 486 1988 with leads and info
|
09-09-2024, 04:11 PM | #6 | |
Registered User
Join Date: Jan 2024
Location: Tampa, Fl
Posts: 10
|
Re: Rosie, a '62 GMC Carryall
Quote:
Im not selling my Aunt's truck. |
|
09-09-2024, 09:31 PM | #7 |
Senior Member
Join Date: Nov 2013
Location: Portland, OR
Posts: 546
|
Re: Rosie, a '62 GMC Carryall
I’m a fan. A fan of Palomino tan. Great truck!
|
09-10-2024, 07:02 PM | #8 |
Senior Member
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,842
|
Re: Rosie, a '62 GMC Carryall
I have the Barn Doors, so not able to address how-to, but here some pics from the manual. Hope it helps.
__________________
MusicMan70 1961 GMC Suburban |
09-10-2024, 07:18 PM | #9 |
Registered User
Join Date: Jan 2024
Location: Tampa, Fl
Posts: 10
|
Re: Rosie, a '62 GMC Carryall
Very helpful, MusicMan, thank you.
|
09-17-2024, 06:33 PM | #10 |
Registered User
Join Date: Jan 2024
Location: Tampa, Fl
Posts: 10
|
Re: Rosie, a '62 GMC Carryall
Tailgate open, lock cylinder out, at the locksmith getting rekeyed.
It feels like every time I get up there I get less and less done. I think I need a hand or something. Doesn't help that she's 4-1/2 hours away. I pretty much drove up that morning and worked on her while I had light. Did some vacuuming inside to get the crud out enough to allow me to climb through. Took the panel off, opened the tailgate. Dead simple. After that I tried to start her and got nowhere. Got one or two coughs, then the batteries died (despite having them on a trickle charger for the past two weeks) I'm also half convinced that I got the wiring order messed up when I changed the wires, and maybe I shouldn't be using crappy Amazon-Special wires. |
09-24-2024, 08:36 PM | #11 |
Registered User
Join Date: Jan 2024
Location: Tampa, Fl
Posts: 10
|
Re: Rosie, a '62 GMC Carryall
$50ish, and we have a rekeyed cylinder
Some wrenching, and we have a latch that latches https://youtu.be/nMq0O4g6lYo Took the carb off and took it home For some reason I thought it might need cleaning. I've always been an inline guy, so working with a V8 is different. I do wonder if I should look for a spreadbore carb. to better match the intake. But maybe that should wait for when everything is actually running Last edited by Mr_Asa; 09-24-2024 at 08:48 PM. |
11-01-2024, 02:19 PM | #12 |
Registered User
Join Date: Jan 2015
Location: Tampa, Fl.
Posts: 426
|
Re: Rosie, a '62 GMC Carryall
Hey your truck is local to me. If you need a hand let me know. I'm in the market for one so spending some time working on one would help me for things to look for when I am looking at them. I already have a 65 C10 I finished about a year ago and have been through that truck front to back.
__________________
1965 C-10 1/2 ton shortbed part time daily driver 1980 C-10 1/2 ton shortbed project |
11-04-2024, 08:23 PM | #13 | |
Registered User
Join Date: Jan 2024
Location: Tampa, Fl
Posts: 10
|
Re: Rosie, a '62 GMC Carryall
Quote:
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|