|
03-12-2012, 12:58 PM
|
#1 |
|
Registered User
Join Date: May 2011
Location: Austin, TX
Posts: 32
|
No right turn signal
After redoing my interior and all the wiring in my truck I have put everything back together. However, I have no right turn signal.
The switch moves freely and has connection, but nothing happens when I flip it. Left side is perfectly functional and so are the hazards. If it is a wiring issue, wouldn't neither side work? Is it a contact issue in the steering column?
__________________
1973 C10 350 700R4 |
|
|
|
03-16-2012, 12:01 PM
|
#2 |
|
Registered User
Join Date: Sep 2008
Location: Rosedale B.C. Canada
Posts: 29
|
Re: No right turn signal
Hy cahurst2001, you said the hazards work fine, so the wiring is okay. Since the circuit for the brake lights must pass through the turn signal switch, put the turn signal in right turn mode, step on the brake, and have an assistant check and see if you only have one brake light (left). If both brake lights are on then the turn signal switch is not making contact internaly, and is probably broken, If you only have one brake light (left) then turn on the ignition, if the right signal still does not flash, then power inside the turn signal switch is not being sent to the right turn signal connections inside the switch. Either way it looks like the turn signal switch might be the problem, hope that helps.
|
|
|
|
|
03-16-2012, 01:09 PM
|
#3 |
|
Registered User
Join Date: May 2011
Location: Austin, TX
Posts: 32
|
Re: No right turn signal
turns out my wiring wasn't as good as i thought. the right signal wire was severed.
__________________
1973 C10 350 700R4 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
