KS Labor Day 67-72 parts special!!!!!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 09-03-2011, 07:26 PM

2876

teeitup · 09-03-2011, 07:27 PM

2881

teeitup · 09-03-2011, 07:28 PM

2886
Console $70 shipped. Has a couple extra holes in fornt and cracked in bottom. Shipping is $20-25 of the $70

teeitup · 09-03-2011, 07:30 PM

2891

teeitup · 09-03-2011, 07:31 PM

2896

Rochlow · 09-03-2011, 07:32 PM

How much for the console?

teeitup · 09-03-2011, 07:33 PM

2901

teeitup · 09-03-2011, 07:34 PM

2906

teeitup · 09-03-2011, 07:35 PM

2911

teeitup · 09-03-2011, 07:36 PM

2916

gcburdic · 09-03-2011, 07:37 PM

Randy....interested in the POSI (what gear) and black dash pad....shipping to 28031

teeitup · 09-03-2011, 07:38 PM

2921
1) motors
2) motor
3) turbo 400 tranny
4) gold bed $200
5) red bed $250

teeitup · 09-03-2011, 07:39 PM

2926
1) 69 cab rust in rockers, corners, little in floor pan $350
2) flat bed $250
3) blue bed, nice floor $150
4) 67 gmc C20 with V6, will be parting
5) 5 lug disc brake frontends $75 each no ship, 5 lug rearends $100 each no ship

teeitup · 09-03-2011, 07:40 PM

2940

teeitup · 09-03-2011, 07:41 PM

All the pics I have for now, Thanks Randy

teeitup · 09-03-2011, 07:56 PM

77Chris03, I think the posi is a 3.73 ratio but will check again, its out of 67 1/2 $275 plus shipping. I have a couple lighters/and assembly for $15 shipped. Sorry no headliner trim. the white covered panels would fit $25 plus shipping

VA72C10, Jonathan, $15 each gauge setup plus shipping. I can get pics of all of them if interested. I have 4 or 5 booster vac lines off BB trucks $22 shipped each. I only have one drum booster setup its on post 2791 off a 67 C20 $25 plus shipping

Rochlow, has a couple extra holes on front and bottom is cracked $70 shipped

gcburdic, Geoff, think its a 3.73, its out of 67 1/2 ton $275 plus shipping. Dash pads are driver quality, prefer not to ship sorry

Thanks Randy

**Cash3481** · 09-03-2011, 08:12 PM

Randy,
Here's my list! When you get a chance.
1. 72 D/s white arm rest
2. T-400 tail shaft price (I have both drive shafts)
3. Sandalwood vent d/s
4. 4 core radiator hold down
5. Tail light lens screws X5
Thanks for pricing this all for me!
Mike
Posted via Mobile Device

teeitup · 09-03-2011, 08:16 PM

Mike,
sorry no driver side 72 arm rests
turbo 400 stub shaft $20
not sure if I have driver side sandlewood defrost vent, but I will look Sun morn
4 core holddowns are you needing upper and lower? If so $22 for the set of 4
taillight screws I'll throw them in with deal
$11 shipping for all
Thanks Randy

Rochlow · 09-03-2011, 08:22 PM

Randy, I think I'm going to pass.. Thanks for the reply

projectjimmie68 · 09-03-2011, 08:23 PM

How much for a good points distributor for a 350 plus shipping to zip 32136? Thanks

**DeadheadNM** · 09-03-2011, 08:35 PM

Randy, how much for a really nice set of valve covers correct for my 72 350? Any 72 specific aux fuel tank parts AND/OR a working speaker? Thanks, Pete

mightymouse · 09-03-2011, 08:54 PM

teeitup..how much for console? doe's it have the strap; and latch? thank's johnny

**Cash3481** · 09-03-2011, 08:58 PM

Randy,
Pay paled you $53.
Thanks for all your assistance every time I need something!
Mike
Posted via Mobile Device

laplander · 09-03-2011, 09:32 PM

Do you have any driver quality headlight bezels for a 67? How about some chrome grill pieces? How much for shipping to 88240?
Thanks.

redmonster · 09-03-2011, 09:37 PM

randy
how much for
three on the tree shift lever
exhaust manifold for a I6 250

shippped to 79936

09-03-2011, 07:26 PM	#26
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2876 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:27 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2881 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:28 PM	#28
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2886 Console $70 shipped. Has a couple extra holes in fornt and cracked in bottom. Shipping is $20-25 of the $70 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 09-03-2011 at 10:28 PM.

09-03-2011, 07:30 PM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2891 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:31 PM	#30
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2896 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:32 PM	#31
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Labor Day 67-72 parts special!!!!!!!! How much for the console?

09-03-2011, 07:33 PM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2901 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:34 PM	#33
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2906 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:35 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2911 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:36 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2916 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:37 PM	#36
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Labor Day 67-72 parts special!!!!!!!! Randy....interested in the POSI (what gear) and black dash pad....shipping to 28031 __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

09-03-2011, 07:38 PM	#37
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2921 1) motors 2) motor 3) turbo 400 tranny 4) gold bed $200 5) red bed $250 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 09-03-2011 at 08:27 PM.

09-03-2011, 07:39 PM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2926 1) 69 cab rust in rockers, corners, little in floor pan $350 2) flat bed $250 3) blue bed, nice floor $150 4) 67 gmc C20 with V6, will be parting 5) 5 lug disc brake frontends $75 each no ship, 5 lug rearends $100 each no ship Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 09-03-2011 at 08:26 PM.

09-03-2011, 07:40 PM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 2940 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 07:41 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! All the pics I have for now, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

09-03-2011, 07:56 PM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 77Chris03, I think the posi is a 3.73 ratio but will check again, its out of 67 1/2 $275 plus shipping. I have a couple lighters/and assembly for $15 shipped. Sorry no headliner trim. the white covered panels would fit $25 plus shipping VA72C10, Jonathan, $15 each gauge setup plus shipping. I can get pics of all of them if interested. I have 4 or 5 booster vac lines off BB trucks $22 shipped each. I only have one drum booster setup its on post 2791 off a 67 C20 $25 plus shipping Rochlow, has a couple extra holes on front and bottom is cracked $70 shipped gcburdic, Geoff, think its a 3.73, its out of 67 1/2 ton $275 plus shipping. Dash pads are driver quality, prefer not to ship sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 09-03-2011 at 10:08 PM.

09-03-2011, 08:12 PM	#42
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Labor Day 67-72 parts special!!!!!!!! Randy, Here's my list! When you get a chance. 1. 72 D/s white arm rest 2. T-400 tail shaft price (I have both drive shafts) 3. Sandalwood vent d/s 4. 4 core radiator hold down 5. Tail light lens screws X5 Thanks for pricing this all for me! Mike Posted via Mobile Device

09-03-2011, 08:16 PM	#43
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Mike, sorry no driver side 72 arm rests turbo 400 stub shaft $20 not sure if I have driver side sandlewood defrost vent, but I will look Sun morn 4 core holddowns are you needing upper and lower? If so $22 for the set of 4 taillight screws I'll throw them in with deal $11 shipping for all Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 08:22 PM	#44
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Labor Day 67-72 parts special!!!!!!!! Randy, I think I'm going to pass.. Thanks for the reply

09-03-2011, 08:23 PM	#45
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Labor Day 67-72 parts special!!!!!!!! How much for a good points distributor for a 350 plus shipping to zip 32136? Thanks

09-03-2011, 08:35 PM	#46
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,285	Re: Labor Day 67-72 parts special!!!!!!!! Randy, how much for a really nice set of valve covers correct for my 72 350? Any 72 specific aux fuel tank parts AND/OR a working speaker? Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-03-2011, 08:54 PM	#47
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: Labor Day 67-72 parts special!!!!!!!! teeitup..how much for console? doe's it have the strap; and latch? thank's johnny

09-03-2011, 08:58 PM	#48
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Labor Day 67-72 parts special!!!!!!!! Randy, Pay paled you $53. Thanks for all your assistance every time I need something! Mike Posted via Mobile Device Last edited by Cash3481; 09-03-2011 at 09:41 PM.

09-03-2011, 09:32 PM	#49
laplander Registered User Join Date: Nov 2002 Location: NM Posts: 705	Re: Labor Day 67-72 parts special!!!!!!!! Do you have any driver quality headlight bezels for a 67? How about some chrome grill pieces? How much for shipping to 88240? Thanks.

09-03-2011, 09:37 PM	#50
redmonster Registered User Join Date: Dec 2008 Location: EL PASO,TEJAS Posts: 212	Re: Labor Day 67-72 parts special!!!!!!!! randy how much for three on the tree shift lever exhaust manifold for a I6 250 shippped to 79936 __________________ WITNESS Dont be like me be better than me

Register or Log In To remove these advertisements.