What do you guys think? - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BuiltByBrooks · 08-09-2009, 11:40 PM

got my bag plates cut, welded, and cleaned up. I'll post pics soon of them welded on once i get one more part...

Before

After

[

BuiltByBrooks · 08-15-2009, 09:03 PM

AceX · 08-15-2009, 11:02 PM

You should just leave the frame in bare metal and clear coat it. It would be a crime to cover that beautiful work up...

Mike Bradbury · 08-16-2009, 10:29 AM

From a welding instructor I would say you pass! Nice job. Not only on the welding but the fab. being a good welder is one thing but being able to engineer the whole thing is quite another trade in itself.
So we know that you have a syncro 250 and a model 3 bender. But what other tools do you use to fab those nice cuts. Your bag plates look very precise for a garage shop.

BuiltByBrooks · 08-16-2009, 10:55 AM

Quote:

Originally Posted by Mike Bradbury

From a welding instructor I would say you pass! Nice job. Not only on the welding but the fab. being a good welder is one thing but being able to engineer the whole thing is quite another trade in itself.
So we know that you have a syncro 250 and a model 3 bender. But what other tools do you use to fab those nice cuts. Your bag plates look very precise for a garage shop.

here is a picture of some of the things i have..

I need to get a shop soon..

ShowSS12 · 08-16-2009, 12:04 PM

Nice set-up.... is that a frame table that wheel is on?

BuiltByBrooks · 08-16-2009, 12:09 PM

Quote:

Originally Posted by ShowSS12

Nice set-up.... is that a frame table that wheel is on?

Thanks

Yea..

BuiltByBrooks · 08-21-2009, 10:51 PM

Bazooka · 08-21-2009, 11:30 PM

You do some really nice work man..

Mike Bradbury · 08-22-2009, 10:16 AM

I didn't see a water jetter tucked in the corner of your garage. Maybe I missed it. I like the clear coat idea. are you going to paint or powder coat? As always looks awesome.

BuiltByBrooks · 08-22-2009, 12:26 PM

Quote:

Originally Posted by Mike Bradbury

I didn't see a water jetter tucked in the corner of your garage. Maybe I missed it. I like the clear coat idea. are you going to paint or powder coat? As always looks awesome.

Not sure yet, my mind changes to much.. I'll just have to wait until i get to that point i guess...

Thanks by the way!!

O, I have Nathan cut my stuff out at his shop

joe231 · 09-16-2009, 10:02 PM

Quote:

Originally Posted by BuiltByBrooks

Not sure yet, my mind changes to much.. I'll just have to wait until i get to that point i guess...

Thanks by the way!!

O, I have Nathan cut my stuff out at his shop

Very nice stuff!

it is nice to have connections, huh?

BuiltByBrooks · 09-17-2009, 01:06 AM

Quote:

Originally Posted by joe231

Very nice stuff!

it is nice to have connections, huh?

Yes it is....

seldomseen65 · 08-22-2009, 08:38 PM

brooks are you still at it ,, i mean doing such great work i still can't believe it ,,keep up the good work OK,, larry

reedwesd · 08-25-2009, 02:07 AM

Awsome work.

Slmd92DIME · 08-29-2009, 12:11 AM

Very Very nice frame work.... Impressive

sweetnlow67 · 08-31-2009, 10:56 AM

its a shame all that work and beautful welds went on a toyota lol im just playin but seriously, id love to see what you could do with a c10

BuiltByBrooks · 08-31-2009, 04:26 PM

Quote:

Originally Posted by sweetnlow67

its a shame all that work and beautful welds went on a toyota lol im just playin but seriously, id love to see what you could do with a c10

Hopefully soon I'll be getting a Square Body Blazer to do up...

scotts62 · 09-02-2009, 07:24 AM

Very nice work!

OARNGESI · 09-02-2009, 03:02 AM

What year blazer are you going to be looking for

BuiltByBrooks · 09-02-2009, 08:45 PM

Quote:

Originally Posted by OARNGESI

What year blazer are you going to be looking for

Not sure what year it was, forgot.. Buying it from Nate

n2billet · 09-02-2009, 10:08 PM

Quote:

Originally Posted by BuiltByBrooks

Not sure what year it was, forgot.. Buying it from Nate

Is it a purple color?

BuiltByBrooks · 09-02-2009, 10:21 PM

Quote:

Originally Posted by n2billet

Is it a purple color?

Yea....

reedwesd · 09-16-2009, 09:15 PM

Any new updates on the truck?

derek6787 · 09-02-2009, 03:04 AM

DUDE! You need to move to Missouri lol. Swweeeet work by the way!

08-09-2009, 11:40 PM	#1
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: What do you guys think? got my bag plates cut, welded, and cleaned up. I'll post pics soon of them welded on once i get one more part... Before After [ Last edited by BuiltByBrooks; 08-09-2009 at 11:40 PM.

08-15-2009, 09:03 PM	#2
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: What do you guys think?

08-15-2009, 11:02 PM	#3
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What do you guys think? You should just leave the frame in bare metal and clear coat it. It would be a crime to cover that beautiful work up... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

08-16-2009, 10:29 AM	#4
Mike Bradbury Registered User Join Date: Apr 2008 Location: San Diego California Posts: 1,316	Re: What do you guys think? From a welding instructor I would say you pass! Nice job. Not only on the welding but the fab. being a good welder is one thing but being able to engineer the whole thing is quite another trade in itself. So we know that you have a syncro 250 and a model 3 bender. But what other tools do you use to fab those nice cuts. Your bag plates look very precise for a garage shop. __________________ I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583

08-16-2009, 12:04 PM	#6
ShowSS12 Registered User Join Date: Apr 2008 Location: Sugarland,Tejas Posts: 356	Re: What do you guys think? Nice set-up.... is that a frame table that wheel is on? __________________ Adam M STX Designs Motorcycles \| Choppers \| Hotrods

08-21-2009, 10:51 PM	#8
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: What do you guys think? Last edited by BuiltByBrooks; 08-21-2009 at 10:52 PM.

08-21-2009, 11:30 PM	#9
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: What do you guys think? You do some really nice work man..

08-22-2009, 10:16 AM	#10
Mike Bradbury Registered User Join Date: Apr 2008 Location: San Diego California Posts: 1,316	Re: What do you guys think? I didn't see a water jetter tucked in the corner of your garage. Maybe I missed it. I like the clear coat idea. are you going to paint or powder coat? As always looks awesome. __________________ I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583

08-22-2009, 08:38 PM	#14
seldomseen65 spirit rider66 Join Date: Oct 2008 Location: pahrump, nevada, in the bowels of the Mojave desert Posts: 291	Re: What do you guys think? brooks are you still at it ,, i mean doing such great work i still can't believe it ,,keep up the good work OK,, larry __________________ :Chevy: If you don't run your own life,, some one else will. to our vets,, welcome home,, and thank you for your service.:Chevy:

08-25-2009, 02:07 AM	#15
reedwesd Registered User Join Date: Aug 2009 Location: Winchester TN Posts: 15	Re: What do you guys think? Awsome work.

08-29-2009, 12:11 AM	#16
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: What do you guys think? Very Very nice frame work.... Impressive __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=269019 Petitioning No Regrets MD/WV

08-31-2009, 10:56 AM	#17
sweetnlow67 Registered User Join Date: Jul 2008 Location: Pleasant Hill, Missouri Posts: 77	Re: What do you guys think? its a shame all that work and beautful welds went on a toyota lol im just playin but seriously, id love to see what you could do with a c10

09-02-2009, 07:24 AM	#19
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: What do you guys think? Very nice work! __________________ Scott 93 crew cab build Project 62

09-02-2009, 03:02 AM	#20
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: What do you guys think? What year blazer are you going to be looking for __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

09-16-2009, 09:15 PM	#24
reedwesd Registered User Join Date: Aug 2009 Location: Winchester TN Posts: 15	Re: What do you guys think? Any new updates on the truck?



Register or Log In To remove these advertisements.

09-02-2009, 03:04 AM	#25
derek6787 Backwoods Body Join Date: Jul 2007 Location: Missouri Posts: 146	Re: What do you guys think? DUDE! You need to move to Missouri lol. Swweeeet work by the way! __________________ http://i659.photobucket.com/albums/u...ipics028-1.jpg

Register or Log In To remove these advertisements.