GA Transmission bellhousing and parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1969guy** · 05-12-2016, 08:21 PM

If anyone may be interested, I have some 1950 GMC parts, or atleast that's what I pulled them off of.

Have:
-working floor button starter $90 plus shipping
-manual transmission bell housing for inline 6 with covers and fork $50 plus shipping
-4 bolt manual transmission flywheel with bolts(has minor cracks in clutch surface) $35 plus shipping
-matching clutch, pressure plate, and throw out bearing( looks like low miles)$50 plus shipping

**1969guy** · 05-12-2016, 08:22 PM

Starter

**1969guy** · 05-12-2016, 08:24 PM

Bell housing

**1969guy** · 05-12-2016, 08:25 PM

Flywheel

**1969guy** · 05-12-2016, 08:30 PM

Covers to preferably go with bellhousing.

Can make a package deal of someone would like all of it. $200 plus shipping

I can load and probably send on a pallet if you have a business it can be delivered to otherwise it will need to be picked up if bought all together.

**1969guy** · 05-13-2016, 05:58 PM

Any offers? Had plans for this stuff but decided to go a different route with my tractor so this stuff is just in my way now.

**1969guy** · 06-06-2016, 11:55 AM

Still for sale. No one needs a spare starter? Or flywheel and clutch/pressure plate? Don't believe you can get flywheels anywhere aftermarket.

Make some silly offers, you may just get it. This stuff is still in my way.

Thanks

**dennislbrooks** · 06-06-2016, 04:14 PM

How close are you to stone mountain? I can use the dust cover. I have a daughter and son in law that live down there. Is Forsyth on 75 north of Atlanta?

**1969guy** · 06-06-2016, 05:05 PM

Well I think there is a Forsyth north of Atlanta but I'm south and it's right on 75.
I think I'm about hour and a half away. Are you in stone mountain or is that where you wanted to meet? I'm actually working in dunwoody the rest of the week. Is the cover all you want? Anything else you could use? I'll make a good package deal.

Thanks

**dennislbrooks** · 06-06-2016, 06:09 PM

I later looked at mapquest and saw you were south of Atlanta. If north I could always justify a trip to my daughters and pick something up on the way. This would be tough coordination and would cost us both too much.

Thanks for the response.

**1969guy** · 06-26-2016, 04:42 PM

Still all for sale

solidaxel · 06-30-2016, 10:53 AM

Quote:

Originally Posted by 1969guy

Covers to preferably go with bellhousing.

Can make a package deal of someone would like all of it. $200 plus shipping

I can load and probably send on a pallet if you have a business it can be delivered to otherwise it will need to be picked up if bought all together.

I am interested in the "L" rod on the clutch fork for clutch adjustment
just broke mine!

**1969guy** · 06-30-2016, 11:20 AM

What's it worth to you? Give me your best offer. I'm not sure what it's worth but shipping will be $8. Plus PayPal fees if you have PayPal.

**1969guy** · 02-01-2017, 07:53 PM

Ttt

solidaxel · 02-01-2017, 10:24 PM

Quote:

Originally Posted by 1969guy

What's it worth to you? Give me your best offer. I'm not sure what it's worth but shipping will be $8. Plus PayPal fees if you have PayPal.

Sorry I did not get back to you

I found one locally and the guy said take it off the bell housing and you can have it
Well it is on there and works fine

Thanks for the offer

**1969guy** · 02-01-2017, 10:30 PM

That's alright, figured you found one.

Thanks

Rust hole · 02-02-2017, 10:41 AM

I'm in need of that L rod from the clutch pedal to the fork. How much shipped to 32092? any more parts other than whats listed?

thanks

**1969guy** · 02-02-2017, 04:52 PM

Quote:

Originally Posted by Rust hole

I'm in need of that L rod from the clutch pedal to the fork. How much shipped to 32092? any more parts other than whats listed?

thanks

How's $25 plus PayPal fees sound?

All I have is what's pictured.

Thanks

Rust hole · 02-03-2017, 09:57 AM

Quote:

Originally Posted by 1969guy

How's $25 plus PayPal fees sound?

All I have is what's pictured.

Thanks

$20 plus fees sounds a lot better to me. If that works pm me your email for Pay Pal.

Thanks

**1969guy** · 02-03-2017, 10:17 AM

Quote:

Originally Posted by Rust hole

$20 plus fees sounds a lot better to me. If that works pm me your email for Pay Pal.

Thanks

Yea that'll work.

Pm sent.

**1969guy** · 02-27-2017, 02:27 PM

Ttt

05-12-2016, 08:21 PM	#1
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Transmission bellhousing and parts If anyone may be interested, I have some 1950 GMC parts, or atleast that's what I pulled them off of. Have: -working floor button starter $90 plus shipping -manual transmission bell housing for inline 6 with covers and fork $50 plus shipping -4 bolt manual transmission flywheel with bolts(has minor cracks in clutch surface) $35 plus shipping -matching clutch, pressure plate, and throw out bearing( looks like low miles)$50 plus shipping Attached Images Last edited by 1969guy; 05-13-2016 at 05:59 PM.

05-12-2016, 08:22 PM	#2
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Starter Attached Images

05-12-2016, 08:24 PM	#3
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Bell housing Attached Images

05-12-2016, 08:25 PM	#4
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Flywheel Attached Images

05-12-2016, 08:30 PM	#5
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Covers to preferably go with bellhousing. Can make a package deal of someone would like all of it. $200 plus shipping I can load and probably send on a pallet if you have a business it can be delivered to otherwise it will need to be picked up if bought all together. Attached Images

05-13-2016, 05:58 PM	#6
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Any offers? Had plans for this stuff but decided to go a different route with my tractor so this stuff is just in my way now.

06-06-2016, 11:55 AM	#7
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Still for sale. No one needs a spare starter? Or flywheel and clutch/pressure plate? Don't believe you can get flywheels anywhere aftermarket. Make some silly offers, you may just get it. This stuff is still in my way. Thanks __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

06-06-2016, 04:14 PM	#8
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,764	Re: Transmission bellhousing and parts How close are you to stone mountain? I can use the dust cover. I have a daughter and son in law that live down there. Is Forsyth on 75 north of Atlanta? __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T

06-06-2016, 05:05 PM	#9
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Well I think there is a Forsyth north of Atlanta but I'm south and it's right on 75. I think I'm about hour and a half away. Are you in stone mountain or is that where you wanted to meet? I'm actually working in dunwoody the rest of the week. Is the cover all you want? Anything else you could use? I'll make a good package deal. Thanks __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

06-06-2016, 06:09 PM	#10
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,764	Re: Transmission bellhousing and parts I later looked at mapquest and saw you were south of Atlanta. If north I could always justify a trip to my daughters and pick something up on the way. This would be tough coordination and would cost us both too much. Thanks for the response. __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T

06-26-2016, 04:42 PM	#11
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Still all for sale __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

06-30-2016, 11:20 AM	#13
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts What's it worth to you? Give me your best offer. I'm not sure what it's worth but shipping will be $8. Plus PayPal fees if you have PayPal. __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

02-01-2017, 07:53 PM	#14
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Ttt __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

02-01-2017, 10:30 PM	#16
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts That's alright, figured you found one. Thanks __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

02-02-2017, 10:41 AM	#17
Rust hole Registered User Join Date: Mar 2013 Location: St. Augustine, Fl Posts: 59	Re: Transmission bellhousing and parts I'm in need of that L rod from the clutch pedal to the fork. How much shipped to 32092? any more parts other than whats listed? thanks



Register or Log In To remove these advertisements.

02-27-2017, 02:27 PM	#21
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Transmission bellhousing and parts Ttt __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

Register or Log In To remove these advertisements.