Bed cutting question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

harshard · 11-10-2009, 03:37 AM

Does anyone have a thread on how to cut a long bed down to a short? I am almost sure I have seen pictures or threads of this in the past but I did not save them for reference. I am planning on performing this task in the not so distant future but not sure on the exact measurements. If I remember right the bed is cut in two areas, one before and one after the wheel-well. Also wondering if there is any issue with the body lines lining up. Any help would be great. Thanks,Shawn

Rollie396 · 11-10-2009, 04:23 AM

Here ya go.I'm not linking you to the exact page cuz there's lots of other cool stuff in this one!What you're after is in there though.
http://67-72chevytrucks.com/vboard/s...light=low+buck

harshard · 11-10-2009, 08:32 AM

Rollie396 I still did not see what I am looking for, but thanks for the links. Shawn

70chevytruck · 11-10-2009, 08:44 AM

pages 7-8-9 are of the bed getting cut down.

harshard · 11-10-2009, 09:41 AM

I found it. Thanks, this is great help. Very detailed. Thanks, Shawn

Ackattack · 11-10-2009, 12:17 PM

check my project no buck build thread, there are a few pics in there, but project Low Buck is what I used as instructions do cut my bed.

11-10-2009, 03:37 AM	#1
harshard Registered User Join Date: Aug 2008 Location: Kaufman,Texas Posts: 102	Bed cutting question. Does anyone have a thread on how to cut a long bed down to a short? I am almost sure I have seen pictures or threads of this in the past but I did not save them for reference. I am planning on performing this task in the not so distant future but not sure on the exact measurements. If I remember right the bed is cut in two areas, one before and one after the wheel-well. Also wondering if there is any issue with the body lines lining up. Any help would be great. Thanks,Shawn

11-10-2009, 04:23 AM	#2
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: Bed cutting question. Here ya go.I'm not linking you to the exact page cuz there's lots of other cool stuff in this one!What you're after is in there though. http://67-72chevytrucks.com/vboard/s...light=low+buck __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics Last edited by Rollie396; 11-10-2009 at 04:24 AM.

11-10-2009, 08:32 AM	#3
harshard Registered User Join Date: Aug 2008 Location: Kaufman,Texas Posts: 102	Re: Bed cutting question. Rollie396 I still did not see what I am looking for, but thanks for the links. Shawn

11-10-2009, 08:44 AM	#4
70chevytruck Registered User Join Date: Jun 2007 Location: Buda, Texas Posts: 863	Re: Bed cutting question. pages 7-8-9 are of the bed getting cut down. __________________ 70chevytruck

11-10-2009, 09:41 AM	#5
harshard Registered User Join Date: Aug 2008 Location: Kaufman,Texas Posts: 102	Re: Bed cutting question. I found it. Thanks, this is great help. Very detailed. Thanks, Shawn

11-10-2009, 12:17 PM	#6
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: Bed cutting question. check my project no buck build thread, there are a few pics in there, but project Low Buck is what I used as instructions do cut my bed. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.