The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-29-2022, 12:12 AM   #1
tigerchevelle
Registered User
 
Join Date: Oct 2013
Location: socal
Posts: 16
70 c10 short bed floor measurements

Can someone with a steel short bed floor get me some dimensions like the picture I uploaded please?
I have repop. Fleetside,Fleeting, sides
Attached Images
 
tigerchevelle is offline   Reply With Quote
Old 02-01-2022, 07:07 PM   #2
mike1971c10
Senior Member
 
mike1971c10's Avatar
 
Join Date: May 2012
Location: phoenix az
Posts: 431
Re: 70 c10 short bed floor measurements

Here is a picture of my 67 shortbed I show 14" from center of wheel well bolt hole to center of bolt hole for bracket. It looks like the other measurement is from that wheel well hole to end of bed and I show that to be 17 1/2"
I hope that helps
mike
Attached Images
 
__________________
my build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522167 vietnam vet 67-68
mike1971c10 is offline   Reply With Quote
Old 03-02-2022, 09:15 PM   #3
tigerchevelle
Registered User
 
Join Date: Oct 2013
Location: socal
Posts: 16
Re: 70 c10 short bed floor measurements

Yes the bolt hole measurements help,but could you get me measurements of the sheet metal end to end, I guess my red lines showed as the hole center to center, but I needed the metal dimensions.
Thank you for your help,very much appreciated.
Phil
tigerchevelle is offline   Reply With Quote
Old 03-03-2022, 10:09 PM   #4
Furno68C20
Senior Member
 
Join Date: Mar 2019
Location: Somonauk IL
Posts: 319
Re: 70 c10 short bed floor measurements

I have a 67 short bed floor out of the truck in good shape. I'll get some measurements over to you.
__________________
67 C10 Fleetside SOLD
67 C10 SWB Fleetside
67 C20 Fleetside
68 C10 Fleetside
68 C20 Fleetside SOLD
72 k20
Pay Pal: Grant.Furneaux@gmail.com
Furno68C20 is offline   Reply With Quote
Old 03-03-2022, 11:30 PM   #5
Furno68C20
Senior Member
 
Join Date: Mar 2019
Location: Somonauk IL
Posts: 319
Quote:
Originally Posted by tigerchevelle View Post
Yes the bolt hole measurements help,but could you get me measurements of the sheet metal end to end, I guess my red lines showed as the hole center to center, but I needed the metal dimensions.
Thank you for your help,very much appreciated.
Phil
18-1/4” and 15-1/4”
Posted via Mobile Device
Attached Images
   
Furno68C20 is offline   Reply With Quote
Old 03-08-2022, 11:11 AM   #6
tigerchevelle
Registered User
 
Join Date: Oct 2013
Location: socal
Posts: 16
Re: 70 c10 short bed floor measurements

Gentlemen thank you for all your help.

I'll post pics of the floor when I'm done.

Phil
tigerchevelle is offline   Reply With Quote
Old 03-09-2022, 02:06 PM   #7
tigerchevelle
Registered User
 
Join Date: Oct 2013
Location: socal
Posts: 16
Re: 70 c10 short bed floor measurements

Got the pieces welded in last night, needs some more grinding with an air mini grinder and my harbor freight mini hand held da.
I was not able to get the 18 1/4 and 15 1/4 numbers.
Only 18 and 15 with the aftermarket besides frome classic industries.
I did get the 14 inch hole dimensions though.
I need to have someone blast the floor or I might get one of those cheap wet blasters you put sand in.
Attached Images
  
tigerchevelle is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com