73+ bags and brackets same as 67? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CochinoFilipino · 01-29-2007, 07:20 PM

I saw this ad and was thinking of making an offer on some parts if I can use them.

Will any of this work for me?

http://sfbay.craigslist.org/eby/pts/267742171.html

Thanks,

pharcydekm · 01-29-2007, 08:23 PM

You could probably use all of it. The bags, valves, line, guages, etc will all work. The only part that is questionable is if you want to four link your truck or not.

CochinoFilipino · 01-29-2007, 08:27 PM

I was thinking of making an offer on just the stuff I could use.

pharcydekm · 01-29-2007, 09:09 PM

Just me but would say offer him $500 for the entire setup go through it use what you want and put the rest back up for sale. Just my .02

shaneo2112RUSH · 01-29-2007, 09:38 PM

67Fleet · 01-29-2007, 10:23 PM

I dunno, isn't Chassis Tech made by AIM? If so, I'd pass. That stuff is crap.

PBFAB.COM · 01-29-2007, 10:41 PM

Don't waste your money on that stuff.... you will regeret it! It is Chassis Tech. AKA AIM Industries, AKA Air Ride Pro... AKA CRAP.

**N2TRUX** · 01-29-2007, 10:48 PM

pharcydekm · 01-29-2007, 11:15 PM

Sorry didn't notice that the title said Chassis Tech. I agree! Aim stuff is definatly not the best. The fittings they sell are garbage. I have run their spool valves like the ones pictured and they actually were not bad at all. Have also used their push button valves and guages WAY back when and they worked just fine. Not defending AIM at all but some of the stuff is usable and some is not. My bad should have read the entire ad.

CochinoFilipino · 01-30-2007, 02:55 AM

Thanks for warnings. I'll just order what I need from Suicide Doors.

bagged69c10 · 01-30-2007, 03:59 PM

Those valves are crap. I had them on my truck a few years ago and they stuck quite often especially when it was cold.

01-29-2007, 07:20 PM	#1
CochinoFilipino Registered User Join Date: Feb 2006 Location: Republic of California Posts: 345	73+ bags and brackets same as 67? I saw this ad and was thinking of making an offer on some parts if I can use them. Will any of this work for me? http://sfbay.craigslist.org/eby/pts/267742171.html Thanks, __________________ '67 C10 Short Stepside 5.0TPI/700R4

01-29-2007, 08:23 PM	#2
pharcydekm Registered User Join Date: May 2003 Location: Englewood, CO Posts: 146	Re: 73+ bags and brackets same as 67? You could probably use all of it. The bags, valves, line, guages, etc will all work. The only part that is questionable is if you want to four link your truck or not.

01-29-2007, 08:27 PM	#3
CochinoFilipino Registered User Join Date: Feb 2006 Location: Republic of California Posts: 345	Re: 73+ bags and brackets same as 67? I was thinking of making an offer on just the stuff I could use. __________________ '67 C10 Short Stepside 5.0TPI/700R4

01-29-2007, 09:09 PM	#4
pharcydekm Registered User Join Date: May 2003 Location: Englewood, CO Posts: 146	Re: 73+ bags and brackets same as 67? Just me but would say offer him $500 for the entire setup go through it use what you want and put the rest back up for sale. Just my .02

01-29-2007, 09:38 PM	#5
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: 73+ bags and brackets same as 67?

01-29-2007, 10:23 PM	#6
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: 73+ bags and brackets same as 67? I dunno, isn't Chassis Tech made by AIM? If so, I'd pass. That stuff is crap. __________________ -Bret 67 short-fleet sold!

01-29-2007, 10:41 PM	#7
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 73+ bags and brackets same as 67? Don't waste your money on that stuff.... you will regeret it! It is Chassis Tech. AKA AIM Industries, AKA Air Ride Pro... AKA CRAP. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-29-2007, 10:48 PM	#8
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: 73+ bags and brackets same as 67? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-29-2007, 11:15 PM	#9
pharcydekm Registered User Join Date: May 2003 Location: Englewood, CO Posts: 146	Re: 73+ bags and brackets same as 67? Sorry didn't notice that the title said Chassis Tech. I agree! Aim stuff is definatly not the best. The fittings they sell are garbage. I have run their spool valves like the ones pictured and they actually were not bad at all. Have also used their push button valves and guages WAY back when and they worked just fine. Not defending AIM at all but some of the stuff is usable and some is not. My bad should have read the entire ad.

01-30-2007, 02:55 AM	#10
CochinoFilipino Registered User Join Date: Feb 2006 Location: Republic of California Posts: 345	Re: 73+ bags and brackets same as 67? Thanks for warnings. I'll just order what I need from Suicide Doors. __________________ '67 C10 Short Stepside 5.0TPI/700R4

01-30-2007, 03:59 PM	#11
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	Re: 73+ bags and brackets same as 67? Those valves are crap. I had them on my truck a few years ago and they stuck quite often especially when it was cold. __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.