Dropmembered trucks - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 12-17-2011, 05:15 PM

Quote:

Originally Posted by porterbuilt

Believe it or not, this has been "done" and we have been selling them for a while now.

But... if you want one built we are closer to "three weeks" than "two". LOL

Gonna have to coin a new phrase: "Three Weeks".

Holding out on us, I see

I have seen the sneak previews on 'other' sites, but none here yet. Ready for some updates, pics, and questions answered, so I can decide if we should start the three week countdown...

Delmo · 12-17-2011, 07:45 PM

Here's one.

Nobaddaze · 12-20-2011, 03:57 PM

hey DM Guys...Ive got a quick question...Im going to look at a donor truck that has a PB Dropmember and A-arms on it tonight. My question is that i see people have different versions of dropmembers (like version 3.2 for example) What are the differences between these models and is there anything i should look out for when checking this truck out? Ive never actually seen a dropmember in person before and i dont want to go into it blind.

any advice would be appreciated. Thanks

PBFAB.COM · 12-20-2011, 04:05 PM

Quote:

Originally Posted by Nobaddaze

hey DM Guys...Ive got a quick question...Im going to look at a donor truck that has a PB Dropmember and A-arms on it tonight. My question is that i see people have different versions of dropmembers (like version 3.2 for example) What are the differences between these models and is there anything i should look out for when checking this truck out? Ive never actually seen a dropmember in person before and i dont want to go into it blind.

any advice would be appreciated. Thanks

The newest version (3.2) is the round tube set-up. The other two designs are plate. Only differences between them are the way that the lower control arms attach, and motor mount tabs.

The 3.2 also has a truss system (ties the inner frame supports, motor mounts, and main crossmember assembly together for additional rigidity).

When you get there, feel free to shoot me a call or a text and I can let you know what generation it is.

480-326-6303

Nate

**superflysteiny** · 12-20-2011, 04:36 PM

Nobaddaze · 12-20-2011, 04:38 PM

Thanks for the response nate. So all geometry is identical between all versions, Its just asthetic improvements between versions? From the cell phone pics i saw, it looked to be a 3.2 with tube setup. Are there any differences in your arms(versions) or any designators to tell me what version they are?

thanks again

PBFAB.COM · 12-20-2011, 04:42 PM

Quote:

Originally Posted by Nobaddaze

Thanks for the response nate. So all geometry is identical between all versions, Its just asthetic improvements between versions? From the cell phone pics i saw, it looked to be a 3.2 with tube setup. Are there any differences in your arms(versions) or any designators to tell me what version they are?

thanks again

There had been a couple minor tweaks to geometry over the years... not due to any concerns or issues... but mainly my inability to leave anything alone!

The only variations on the arms that could exist would be length. We have a standard length option (same as factory) and a one-inch narrowed length option that would be compatible with the Dropmember.

Nate

Nobaddaze · 12-20-2011, 05:14 PM

So it would be safe to assume that if these arms are mated with your DM that they are the narrowed arms? I hope so because thats what i want. I think I need to see this thing and give you a call. I really appreciate all your help with my questions.

BACKYARD88 · 12-20-2011, 05:41 PM

Quote:

Originally Posted by Nobaddaze

So it would be safe to assume that if these arms are mated with your DM that they are the narrowed arms? I hope so because thats what i want. I think I need to see this thing and give you a call. I really appreciate all your help with my questions.

Either one could be bolted to the Dropmember. The Dropmember already narrows the track width, the arms just narrow it more. The one in my avatar is the 3.2.

Nobaddaze · 12-20-2011, 05:45 PM

RIGHT ON! I didnt know the DM Narrowed already. Thanks!

PBFAB.COM · 12-20-2011, 05:54 PM

Quote:

Originally Posted by Nobaddaze

RIGHT ON! I didnt know the DM Narrowed already. Thanks!

The DM narrows the track nearly an inch and a half per side all by itself.

Just shoot me a text later when you go check it out.

Nate

Dinos63 · 12-20-2011, 06:11 PM

Quote:

Originally Posted by superflysteiny

drool!!

Nobaddaze · 12-20-2011, 06:18 PM

^^^^ That truck blows my mind every time i see it!!! Absolutely Beautiful

Mad Rods · 12-20-2011, 10:54 PM

x2

BIG KRIS · 12-21-2011, 09:04 AM

SUPERFLY! That is all!
Posted via Mobile Device

Dinos63 · 12-23-2011, 10:01 PM

Quote:

Originally Posted by rustSpot

Here's a sweet 73 we just finished the suspension on up at Status. Dropmember, two link and 502 to boot!

soo sic!

Dinos63 · 12-23-2011, 10:04 PM

my 66

lowdownstar · 12-24-2011, 11:51 AM

Love it! The pro-street and lowered top notch looking ride!

Ray

**superflysteiny** · 12-25-2011, 03:44 PM

Simply sick
Posted via Mobile Device

**Hart_Rod** · 12-25-2011, 03:52 PM

Quote:

Originally Posted by Dinos63

my 66

Hell yeah!!!!

rustSpot · 12-25-2011, 11:03 PM

Quote:

Originally Posted by dinos63

my 66

dig it!

**Hart_Rod** · 12-28-2011, 03:18 PM

Quote:

Originally Posted by MJs69CST

I need to order front wheels for my drop membered project and understand the general dimensions I need. However, I am struggling to find new wheels on my budget.

I have a limit of about $400 per wheel (tire not included). Any suggestions?
I have looked at Boss 304s (not fond of anything else from them at this point). I don't mind taking the hub metal down if needed.

Thanks in advance.

Coys????

jimmydean · 12-28-2011, 04:48 PM

$400 a wheel, should have all sorts of options. I am looking at spending $400 for the SET.

jmedero · 12-28-2011, 05:46 PM

Centerline you can get most 20's for @$300 22 @$400
Posted via Mobile Device

m6z · 12-28-2011, 07:12 PM

centerline, coys, american racing, etc. I'm sure there are a few others.

12-17-2011, 07:45 PM	#452
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: Dropmembered trucks Here's one.

12-20-2011, 03:57 PM	#453
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks hey DM Guys...Ive got a quick question...Im going to look at a donor truck that has a PB Dropmember and A-arms on it tonight. My question is that i see people have different versions of dropmembers (like version 3.2 for example) What are the differences between these models and is there anything i should look out for when checking this truck out? Ive never actually seen a dropmember in person before and i dont want to go into it blind. any advice would be appreciated. Thanks __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 04:36 PM	#455
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Dropmembered trucks __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-20-2011, 04:38 PM	#456
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks Thanks for the response nate. So all geometry is identical between all versions, Its just asthetic improvements between versions? From the cell phone pics i saw, it looked to be a 3.2 with tube setup. Are there any differences in your arms(versions) or any designators to tell me what version they are? thanks again __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 05:14 PM	#458
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks So it would be safe to assume that if these arms are mated with your DM that they are the narrowed arms? I hope so because thats what i want. I think I need to see this thing and give you a call. I really appreciate all your help with my questions. __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 05:45 PM	#460
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks RIGHT ON! I didnt know the DM Narrowed already. Thanks! __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 06:18 PM	#463
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Dropmembered trucks ^^^^ That truck blows my mind every time i see it!!! Absolutely Beautiful __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-20-2011, 10:54 PM	#464
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: Dropmembered trucks x2 __________________ Chevy Only Tx.........

12-21-2011, 09:04 AM	#465
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Dropmembered trucks SUPERFLY! That is all! Posted via Mobile Device __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

12-23-2011, 10:04 PM	#467
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Dropmembered trucks my 66 Attached Images __________________ CHEVY ONLY... Nothin Else !

12-24-2011, 11:51 AM	#468
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: Dropmembered trucks Love it! The pro-street and lowered top notch looking ride! Ray

12-25-2011, 03:44 PM	#469
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Dropmembered trucks Simply sick Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-28-2011, 04:48 PM	#473
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Dropmembered trucks $400 a wheel, should have all sorts of options. I am looking at spending $400 for the SET. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

12-28-2011, 05:46 PM	#474
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Dropmembered trucks Centerline you can get most 20's for @$300 22 @$400 Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-28-2011, 07:12 PM	#475
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Dropmembered trucks centerline, coys, american racing, etc. I'm sure there are a few others. __________________ Doug Looking for a 67-72 short bed driver.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.