Nice measuring stick - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cojnit · 03-05-2004, 02:22 AM

skid · 03-05-2004, 03:31 AM

I like everything about that truck except for the ridiculous roll bar (from a pickup?), and the mouse fur dash and door panels!

vtblazer · 03-05-2004, 08:34 AM

I think if I were paying that much, I'd rather something more "factory" not all pimped out like that one.
Nice though.

Blue Beard · 03-05-2004, 09:22 AM

What's with the measuring stick.....?

Looked through all the pics and didn't see one.......

Think the price would have been higher if they had done it stock.

72BLAZERDUDE · 03-05-2004, 10:33 AM

I dont understand, The picture shows the roll bar in with the soft top cross bars still on. You would have to take that roll bar out to get the top on so what is the point. Besides the fact that it looks stupid.No AC. What is that thing under the column.? Could have done better for the price. Someone

liked it.

bouncytruck · 03-05-2004, 01:54 PM

It is in nice shape, but I'd remove the roll bar, the tubes on the side, and change the interior color.

By the way, 72BLAZERDUDE, you can put the top up with the roll bar on. I have a roll bar and a soft top. It goes up and down with out any interferance.

72BLAZERDUDE · 03-05-2004, 04:26 PM

Bouncytruck. It looks like you have a stock roll bar and the one in that Blazer sticks up quite a ways over the windshield frame. Would it still work?

bouncytruck · 03-05-2004, 04:38 PM

My roll bar is the Smittybilt. The one on that truck is obviously from a StepSide pickup. It does stick up awefully high. I also noticed that there is only one bow for the top and there should be two - a front and a rear. They mount to the bed rail in just about the same place but one should go over and in front of the roll bar in the up postion and the other goes to the back just above the rear window. I'd guess that the soft top will fit but I doubt you can get a hard top on that thing...

MMGOODIE · 03-05-2004, 06:57 PM

If you go to kaylinetops.com they have the blazer with the white top and if you look the rear bow sits way forward so my guess is that the roll bar acts as the front bow and then they use the real bar for the rear.

03-05-2004, 02:22 AM	#1
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	Nice measuring stick Barret Jackson Auctioned Blazer __________________ Got "the Midas Touch!"

03-05-2004, 03:31 AM	#2
skid Registered User Join Date: Dec 2003 Location: Left Coast Posts: 254	I like everything about that truck except for the ridiculous roll bar (from a pickup?), and the mouse fur dash and door panels! __________________ Toys: 72 K5 Blazer 74 Vette

03-05-2004, 08:34 AM	#3
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Nice I think if I were paying that much, I'd rather something more "factory" not all pimped out like that one. Nice though.

03-05-2004, 09:22 AM	#4
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	What's with the measuring stick.....? Looked through all the pics and didn't see one....... Think the price would have been higher if they had done it stock. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

03-05-2004, 10:33 AM	#5
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 660	I dont understand, The picture shows the roll bar in with the soft top cross bars still on. You would have to take that roll bar out to get the top on so what is the point. Besides the fact that it looks stupid.No AC. What is that thing under the column.? Could have done better for the price. Someone liked it. __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA Last edited by 72BLAZERDUDE; 03-05-2004 at 10:38 AM.

03-05-2004, 01:54 PM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	It is in nice shape, but I'd remove the roll bar, the tubes on the side, and change the interior color. By the way, 72BLAZERDUDE, you can put the top up with the roll bar on. I have a roll bar and a soft top. It goes up and down with out any interferance. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-05-2004, 04:26 PM	#7
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 660	Bouncytruck. It looks like you have a stock roll bar and the one in that Blazer sticks up quite a ways over the windshield frame. Would it still work? __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA

03-05-2004, 04:38 PM	#8
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	My roll bar is the Smittybilt. The one on that truck is obviously from a StepSide pickup. It does stick up awefully high. I also noticed that there is only one bow for the top and there should be two - a front and a rear. They mount to the bed rail in just about the same place but one should go over and in front of the roll bar in the up postion and the other goes to the back just above the rear window. I'd guess that the soft top will fit but I doubt you can get a hard top on that thing... __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-05-2004, 06:57 PM	#9
MMGOODIE I love doing it topless Join Date: Oct 2003 Location: MossyRock, WA Posts: 493	If you go to kaylinetops.com they have the blazer with the white top and if you look the rear bow sits way forward so my guess is that the roll bar acts as the front bow and then they use the real bar for the rear. __________________ Mikey "If you can read this, thank a teacher; If you are reading it in English, thank a soldier."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.