67 SWB First Build

[Scurry67]

Thanks for the compliments. I did the mod a couple years ago. It wasn’t terribly tough from what I remember. Fit it up how i liked it and then welded the bolts in place and removed the head. Then just some body filler and sanding to make it look smooth. It installed with no bracket modifications. I’m really liking the look, too.

[kev2809]

oh nice. ya it turned out great..going to have to steal that lol

[BAD1916]

Just read through this build. Looks amazing. Love the color choice

[Scurry67]

Originally Posted by kev2809

oh nice. ya it turned out great..going to have to steal that lol

Do it!

Originally Posted by BAD1916

Just read through this build. Looks amazing. Love the color choice

I appreciate the compliment. I think the color is going to pop when it gets outside. Hopefully that day isn’t too far down the road

[zicc1835]

Originally Posted by Scurry67

I set out on a goal this past week to get a handful of parts painted and installed. High build, sand and seal coated the parts by Wednesday.
Attachment 2328238

Shot paint on Thursday. The color is a Toyota color called cement gray. It has a slight pearl to it. Very happy with the contrast in colors

Attachment 2328239

Grill trim, headlight buckets, emblem and front bumper installed. Reinstalling the trim was a total PIA with keeping the fasteners seated. That was definitely a frustrating couple of hours, but it came out nice. I’m really liking the look
Attachment 2328240
Next goal is to get the doors put together.

one of my favorite build threads great progress ....I actually bit my lip putting the fasteners on the hoops was a PIA...

[Scurry67]

Originally Posted by zicc1835

one of my favorite build threads great progress ....I actually bit my lip putting the fasteners on the hoops was a PIA...

I appreciate the compliment. I was surprised at how long that install took. It definitely tested my patience, too!

[Scurry67]

Reassembly continued…

I spent a few evenings prepping and painting misc interior pieces. Then another few nights installing the freshly painted pieces.





The glove box door turned out okay. It has its flaws, but overall I’m happy with it!



Reinstalling the door guts was more time consuming than i thought it would be. I also need to clean the window glass still. The Altman door latches work terrific ! I’ll jump onto the driver door reassembly over the next week.

[Scurry67]

Small updates. I’ve been very focused on getting as much of the interior put together as possible. It definitely makes for easy satisfaction! AC ducting mostly installed. Waiting on adapters for the reproduction defrost vents. I also got to installing more door pieces.


I currently have the precision door seals on. Even after all the threads i read about difficulty shutting the door, I thought mine would be different lol. Needless to say, I have new Honda seals ordered and on their way. Hopefully they work as good as everyone says they do!




In the meantime while waiting for some parts, I’m taking a run at re-doing my seat upholstery. After some minor seat frame repair, i took the frame to the blaster and I’ve started diving into the foam repair.

[Scurry67]

Interior progress continued over the last few weeks

Spent some time fitting the foam. It wasn’t terrible other than the big mess it makes. I also shot the seat frame with some black paint i had laying around. It turned out great. Lastly, I had to replace the broken pull cable for the seat adjuster. A quick trip to home depot took care of that.









I also was able to install more interior pieces. The interior door arm rest and the headliner went in smooth. I ended up using adhesive tape for the headliner. We’ll see how that goes.

Seat belts showed up yesterday, so i through those in. My seat cover is on order and should show up this month!

[1972CheyenneSuper]

Progress looking great!! It's definitely a lot of work, but it's paying off tenfold. I'll be following the rest of your journey.

Any tips for putting the door interiors together that isn't covered in the videos and guides?

[loudchevy]

Nice repair on the seat foam and seat adjustment cable.

[zicc1835]

color combo in the cab is awesome can't wait to see the seat cover you picked

[Scurry67]

Originally Posted by 1972CheyenneSuper

Progress looking great!! It's definitely a lot of work, but it's paying off tenfold. I'll be following the rest of your journey.

Any tips for putting the door interiors together that isn't covered in the videos and guides?

Much appreciated. It definitely is a lot of work, but i feel like there is a light at the end of the tunnel!

I found a really good video on youtube that went through it pretty thoroughly, plus it was straight to the point which was nice. I disassembled the doors years ago so it definitely saved me time from the guessing game.

https://youtu.be/Zay64xBOgD8?si=mTnr2gc9TBux4cJE

[Scurry67]

Originally Posted by loudchevy

Nice repair on the seat foam and seat adjustment cable.

Thanks for the compliment. Fingers crossed the foam holds up and is comfortable!

[Scurry67]

Originally Posted by zicc1835

color combo in the cab is awesome can't wait to see the seat cover you picked

I really appreciate it. I’m really liking it as well. It’s definitely coming together. It definitely helps checking out the other threads on here, like yours, to keep the inspiration up!

My son seems to approve, too!

[1972CheyenneSuper]

Originally Posted by Scurry67

Much appreciated. It definitely is a lot of work, but i feel like there is a light at the end of the tunnel!

I found a really good video on youtube that went through it pretty thoroughly, plus it was straight to the point which was nice. I disassembled the doors years ago so it definitely saved me time from the guessing game.

https://youtu.be/Zay64xBOgD8?si=mTnr2gc9TBux4cJE

That is a pretty good video, thanks!

[KyleSeal]

What tilt column is that? Looks kind of like the CPP one?

[Scurry67]

Originally Posted by KyleSeal

What tilt column is that? Looks kind of like the CPP one?

It’s actually a refurbished tilt column. I had it sent out to a member here on the board years ago to be redone.

[Scurry67]

Update.

Been spending the last month verifying tolerances on my engine. Made some decent progress with getting the pistons installed. Hope to get the cam installed in the next week. It has been a fun learning experience for sure.

Last night I jumped into the reupholstery on my seat. It wasn’t too hard at all and turned out great. The repaired side feels awesome and you’d never know it was repaired.

[1972CheyenneSuper]

I like the seat color, really nice complement to the body color.

[zicc1835]

Originally Posted by 1972cheyennesuper

i like the seat color, really nice complement to the body color.

x2

[Scurry67]

Originally Posted by 1972CheyenneSuper

I like the seat color, really nice complement to the body color.

Originally Posted by zicc1835

x2

Thanks! I’m really happy with it so far. It seems to be good quality and comfortable. Happy to check that off the list.

[Scurry67]

Weekend update. Waiting on parts for the engine. I went ahead and got the back window installed with my brother. I had to laugh at the stickers they’ll be coming off eventually.

It took lots of soapy water and had a small minor tear on the interior corner but it looks good. The tear isn’t too big and should go unnoticed.