The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-23-2018, 01:37 PM   #1
ckhdJr.
Registered User
 
Join Date: Sep 2015
Location: St. Johns, AZ
Posts: 2
1972 front hub swap

Good morning everyone, I was just curious if anybody knew if a 1997 c1500 front hub/spindle would fit onto a 1972 c10 hub? I'm trying to put abs onto my 72.

-Ckhdjr.
ckhdJr. is offline   Reply With Quote
Old 11-24-2018, 10:22 AM   #2
dirtyjim
Registered User
 
dirtyjim's Avatar
 
Join Date: Feb 2013
Location: alvin, texas
Posts: 622
Re: 1972 front hub swap

it can be done but so far I don't think anyone has been able to get camber close enough to align it without shortening the lower control arms or moving them in. you have to use 3/4 ton lower control arms for the lower ball joints to fit or weld in a larger ball joint sleeve. there was a write-up on using those spindles for a 6 lug disk brake swap using light duty 3/4 ton 6 lug rotors in the suspension section
__________________
1967 C10 lwb two tone, 305 & rat fink style floor shifted 700r4, 20" steelies
2004 2500HD utility bed aka Brutus
dirtyjim is offline   Reply With Quote
Old 11-24-2018, 11:51 AM   #3
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,976
Re: 1972 front hub swap

Quote:
Originally Posted by ckhdJr. View Post
I'm trying to put abs onto my 72. -Ckhdjr.
Now THAT'S something you don't normally read in someone's very first post Welcome to the forum!
jocko is offline   Reply With Quote
Old 11-24-2018, 09:10 PM   #4
ckhdJr.
Registered User
 
Join Date: Sep 2015
Location: St. Johns, AZ
Posts: 2
Re: 1972 front hub swap

Quote:
Originally Posted by dirtyjim View Post
it can be done but so far I don't think anyone has been able to get camber close enough to align it without shortening the lower control arms or moving them in. you have to use 3/4 ton lower control arms for the lower ball joints to fit or weld in a larger ball joint sleeve. there was a write-up on using those spindles for a 6 lug disk brake swap using light duty 3/4 ton 6 lug rotors in the suspension section
Thank you very much, I appreciate it.

-Ckhdjr.
ckhdJr. is offline   Reply With Quote
Reply

Bookmarks

Tags
1972, 1997, abs, c10, swap


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com