Project Coca-Rustola: '67 C20 Longstepper - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Saclandman · 04-19-2015, 10:41 AM

Quote:

Originally Posted by swamp rat

Looks better without it!

Sure does. I have a clean tailgate sitting in my garage just waiting to go on. But I have to cut off the mounting panel from the old lift gate that's welded on. That'll be fun.

no1udknow · 04-24-2015, 11:20 AM

Quote:

Originally Posted by Saclandman

Parts haul for the 67. New rad support, new inner fender, original drivers side door, front bumper, and clean white 16 in. steel wheels. Money well spent. Thanks, Joe and Marie.

nice, you finally got up there to see Joe, he has a ton of stuff. I have a feeling I will be making the pilgrimage up their too soon.

no1udknow · 04-24-2015, 11:28 AM

Quote:

Originally Posted by 0311Chevy8152

Stopped by to say hi and check out your truck. Looks like we probably are not that far from each other. I went to Monster Machine in Carmichael, have you dealt with them before? I was impressed and think I can trust them but wouldn't mind hearing from anyone who has used them in the past.

Nathan

Are you talking about Motor Machine Super Shop on Fair Oaks by Manzanita? If it is the place I am thinking of, I haven't dealt with them, but I have seen a lot of the cars they do. I used to work at Carmichael Honda motorsports and they used to test drive stuff up and down Fair oaks. If you are just getting an engine built, I have heard good things about them. If your doing a resto, there is a place in elk grove called Elk Grove Muffler and Brake, I know the name seems like an average shop, and until recently that was all they did, but they have moved into the field of full customs and resto's their work is really nice and the owner is pretty cool. I stop in their occasionally to get Ideas.

Saclandman · 04-24-2015, 11:10 PM

Quote:

Originally Posted by no1udknow

nice, you finally got up there to see Joe, he has a ton of stuff. I have a feeling I will be making the pilgrimage up their too soon.

Joe is my go to guy for original parts. Just a butt-load of stuff.

jimbosprint · 04-25-2015, 11:51 AM

Who is Joe and where is "up there"? I'm still searching for a bed or bedside.

Saclandman · 04-25-2015, 12:37 PM

Joe is a vendor on the board. His place is in Orangevale off of Hazel Ave. I'll pm you his phone #.

Saclandman · 04-29-2015, 11:37 PM

Worked on the truck for a few hours today. Get very little accomplished other than bolting up a door and fender multiple times to get the alignment close. Still not right. Ran out of steam and called it a day.

Saclandman · 05-13-2015, 02:20 PM

After waiting for over 2 months, finally said screw it and went into the DMV to get them to issue my registration and plates. Got 'em. Ol' Crusty is now legal to have on the road.

jimbosprint · 05-13-2015, 05:37 PM

Very cool.

Saclandman · 05-13-2015, 06:02 PM

Sometimes it is worth it to sit at the DMV and wait for your number to be called to get your stuff.

Saclandman · 05-21-2015, 10:29 AM

Got my 3-pt shoulder belts installed and cleaned up the interior a bit. Need to make some adjustments to the clutch so the truck shifts down while in motion. Other than that, the truck seems to drive well. Has plenty of go, and stops when I hit the brakes. Surprisingly easy to steer even with no power steering. Was thinking of a power steering install, but not too sure now. Also slapped on my side mirror to my new drivers side door. Looks complete now.

jimbosprint · 05-21-2015, 11:10 AM

I like the mirrors. Good job getting it on the road again!

**Ol Blue K20** · 05-21-2015, 11:30 AM

Looking good

Saclandman · 05-21-2015, 12:27 PM

Thanks, fellas. Still needs a lot of work, but it's driveable which was really my goal all along.

swamp rat · 05-22-2015, 03:46 AM

You have been doing great, keep up the good work!

67chevy1series · 05-22-2015, 02:53 PM

Awesome progress, keep up the progress, very cool truck.

Saclandman · 05-25-2015, 11:03 PM

Got a bit more done today, but found more problems that I need to fix. My rear cross member behind the rear end is busted and loose from the frame. My bedsides are pretty rotted too. But I took more pics, so there's that. Truck drives like a beast.

Saclandman · 05-25-2015, 11:21 PM

While I was working on Ol' Crusty today, the battery in my Tahoe died. I happened to park in in a spot where I couldn't reach for a jump. So I rigged up a cable, and towed my Tahoe with Ol' Crusty to a spot where I could get to it for a jump. Pulled like a boss.

swamp rat · 05-26-2015, 12:50 AM

Love it!

**BC10** · 06-03-2015, 02:46 PM

Subscribed! My dad is about to do some repairs on his 2
70 longbed stepper.
Joe and Marie are the bomb!

Saclandman · 06-13-2015, 03:18 PM

Ol' Crusty is on the road! First fill-up in 30+ years and a little car show at Home Depot in West Sac. Loved the 65 Skylark stuffed with a 455. Georgeous!

jimbosprint · 06-13-2015, 04:31 PM

Very cool. That second one is a great photo of your truck.

Saclandman · 06-13-2015, 04:50 PM

Quote:

Originally Posted by jimbosprint

Very cool. That second one is a great photo of your truck.

Thanks Jimbo. I was a blast driving it around today. Ran like a top. The old exhaust is a little rough though. Got to get it to the muffler shop now.

sduckworth13 · 06-13-2015, 08:39 PM

Nice work, I know it feels great knowing you did all the hard work and have a cool dependable old truck now.

keh27 · 06-13-2015, 11:15 PM

Looks great man

04-25-2015, 11:51 AM	#180
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 940	Re: Project Coca-Rustola: '67 C20 Longstepper Who is Joe and where is "up there"? I'm still searching for a bed or bedside. __________________ '72 Chevrolet C20 Deluxe \| '72 Chevrolet K10 Cheyenne www.jimbosprint.com

04-25-2015, 12:37 PM	#181
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Joe is a vendor on the board. His place is in Orangevale off of Hazel Ave. I'll pm you his phone #. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

04-29-2015, 11:37 PM	#182
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Worked on the truck for a few hours today. Get very little accomplished other than bolting up a door and fender multiple times to get the alignment close. Still not right. Ran out of steam and called it a day. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

05-13-2015, 02:20 PM	#183
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper After waiting for over 2 months, finally said screw it and went into the DMV to get them to issue my registration and plates. Got 'em. Ol' Crusty is now legal to have on the road. Attached Images __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

05-13-2015, 05:37 PM	#184
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 940	Re: Project Coca-Rustola: '67 C20 Longstepper Very cool. __________________ '72 Chevrolet C20 Deluxe \| '72 Chevrolet K10 Cheyenne www.jimbosprint.com

05-13-2015, 06:02 PM	#185
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Sometimes it is worth it to sit at the DMV and wait for your number to be called to get your stuff. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

05-21-2015, 10:29 AM	#186
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Got my 3-pt shoulder belts installed and cleaned up the interior a bit. Need to make some adjustments to the clutch so the truck shifts down while in motion. Other than that, the truck seems to drive well. Has plenty of go, and stops when I hit the brakes. Surprisingly easy to steer even with no power steering. Was thinking of a power steering install, but not too sure now. Also slapped on my side mirror to my new drivers side door. Looks complete now. Attached Images __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

05-21-2015, 11:10 AM	#187
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 940	Re: Project Coca-Rustola: '67 C20 Longstepper I like the mirrors. Good job getting it on the road again! __________________ '72 Chevrolet C20 Deluxe \| '72 Chevrolet K10 Cheyenne www.jimbosprint.com

05-21-2015, 11:30 AM	#188
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: Project Coca-Rustola: '67 C20 Longstepper Looking good __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

05-21-2015, 12:27 PM	#189
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Thanks, fellas. Still needs a lot of work, but it's driveable which was really my goal all along. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

05-22-2015, 03:46 AM	#190
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project Coca-Rustola: '67 C20 Longstepper You have been doing great, keep up the good work! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

05-22-2015, 02:53 PM	#191
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project Coca-Rustola: '67 C20 Longstepper Awesome progress, keep up the progress, very cool truck.

05-25-2015, 11:03 PM	#192
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Got a bit more done today, but found more problems that I need to fix. My rear cross member behind the rear end is busted and loose from the frame. My bedsides are pretty rotted too. But I took more pics, so there's that. Truck drives like a beast. Attached Images __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

05-25-2015, 11:21 PM	#193
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper While I was working on Ol' Crusty today, the battery in my Tahoe died. I happened to park in in a spot where I couldn't reach for a jump. So I rigged up a cable, and towed my Tahoe with Ol' Crusty to a spot where I could get to it for a jump. Pulled like a boss. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

05-26-2015, 12:50 AM	#194
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project Coca-Rustola: '67 C20 Longstepper Love it! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's



Register or Log In To remove these advertisements.

06-03-2015, 02:46 PM	#195
BC10 Senior Member Join Date: Oct 2013 Location: Bay Area, CA Posts: 493	Re: Project Coca-Rustola: '67 C20 Longstepper Subscribed! My dad is about to do some repairs on his 2 70 longbed stepper. Joe and Marie are the bomb!

06-13-2015, 03:18 PM	#196
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Ol' Crusty is on the road! First fill-up in 30+ years and a little car show at Home Depot in West Sac. Loved the 65 Skylark stuffed with a 455. Georgeous! Attached Images __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

06-13-2015, 04:31 PM	#197
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 940	Re: Project Coca-Rustola: '67 C20 Longstepper Very cool. That second one is a great photo of your truck. __________________ '72 Chevrolet C20 Deluxe \| '72 Chevrolet K10 Cheyenne www.jimbosprint.com

06-13-2015, 08:39 PM	#199
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Project Coca-Rustola: '67 C20 Longstepper Nice work, I know it feels great knowing you did all the hard work and have a cool dependable old truck now. __________________ Scott

06-13-2015, 11:15 PM	#200
keh27 Registered User Join Date: Jul 2012 Location: franklin.tn Posts: 600	Re: Project Coca-Rustola: '67 C20 Longstepper Looks great man __________________ 69 step side http://67-72chevytrucks.com/vboard/s...d.php?t=613407

Register or Log In To remove these advertisements.