|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-07-2021, 11:27 PM
|
#1 |
|
Registered User
Join Date: Sep 2014
Location: Nanaimo B.C. wet coast of Canada
Posts: 70
|
Spare tire mounting bar
Any one got a photo of the spare tire mounting bar? The one that goes under the rear of a 1965 Suburban.
|
|
|
|
04-15-2021, 11:49 PM
|
#2 |
|
Registered User
Join Date: Sep 2014
Location: Nanaimo B.C. wet coast of Canada
Posts: 70
|
Re: Spare tire mounting bar
Still looking for photos of the under frame spare mounting bar and hardware.
|
|
|
|
|
04-16-2021, 01:07 AM
|
#3 |
|
Senior Member
   
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,421
|
Re: Spare tire mounting bar
Is it different than the pickup one?
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
04-16-2021, 01:40 AM
|
#4 |
|
Registered User
Join Date: Sep 2014
Location: Nanaimo B.C. wet coast of Canada
Posts: 70
|
Re: Spare tire mounting bar
I think it is the same as the pickup. The one from my Suburban was not there when I purchased it. So I am looking for some photos of how it mounts and what it looks like. Thanks
|
|
|
|
|
04-16-2021, 08:12 AM
|
#5 |
|
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,421
|
Re: Spare tire mounting bar
They aren't great pics, but this is what was on my 63 when I bought it. I've since removed it to go with a chain style hoist from a 90s Nissan pickup. I had to change because the spare tire I chose was too wide for the original carrier.
The factory has a long bolt on each side. One bolt has a special nut that helps hold up the piece that goes under the tire. If you do a search over in the parts section of the board, you will be able to see some better pictures of it.
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
04-16-2021, 02:17 PM
|
#6 |
|
Senior Member
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,820
|
Re: Spare tire mounting bar
Here is what I had under my 1961 Suburban, albeit a bit warped. I'm don't recall how it mounted up and I only have the one bolt/nut combo
__________________
MusicMan70 1961 GMC Suburban |
|
|
|
|
04-16-2021, 03:10 PM
|
#7 |
|
Registered User
Join Date: Sep 2014
Location: Nanaimo B.C. wet coast of Canada
Posts: 70
|
Re: Spare tire mounting bar
Super thanks for taking the time and posting the photos. How wide and deep it the bar? From the photos I can fab up a new bar that looks reasonably close to factory.
|
|
|
|
|
04-16-2021, 04:20 PM
|
#8 |
|
Senior Member
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,820
|
Re: Spare tire mounting bar
It is 1 1/4" deep in the middle and 2 1/2" wide and curved a bit and the plate is 6 1/4"x 6 1/2"
__________________
MusicMan70 1961 GMC Suburban |
|
|
|
|
04-16-2021, 04:21 PM
|
#9 |
|
Registered User
Join Date: Sep 2014
Location: Nanaimo B.C. wet coast of Canada
Posts: 70
|
Re: Spare tire mounting bar
Thanks for the info.
|
|
|
|
|
04-16-2021, 04:25 PM
|
#10 |
|
Senior Member
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,820
|
Re: Spare tire mounting bar
you are welcome!
__________________
MusicMan70 1961 GMC Suburban |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
