The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-19-2021, 07:08 PM   #1
Just-in-credible
Registered User
 
Just-in-credible's Avatar
 
Join Date: Jan 2013
Location: Calgary, Alberta
Posts: 185
60-63 GMC to Chevy dash swap

Just looking for some input. I tried searching on here and did not really find much of the information I was looking for, so I thought I would start a new thread. If there are existing threads on this, please get me a link. Perhaps I was just not searching the right keywords, and my google-fu needs some work.

Has anyone converted a 60-63 GMC dash to a Chevy dash?

I found a GMC cab that is in significantly better shape than the Chevy cab I currently have. I am just wondering how involved it is to swap the dashes over.
__________________
65 short step rebuild thread
http://67-72chevytrucks.com/vboard/s...d.php?t=621399
60 apache 4x4 build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=824325
Just-in-credible is offline   Reply With Quote
Old 10-20-2021, 12:27 AM   #2
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: 60-63 GMC to Chevy dash swap

There's some bolts on each side and then a ton of spot welds at the windshield seam. Might be some more spot welds on the side, but that I don't remember. I haven't taken a dash out, but have seen some out before. I'm considering taking mine out eventually to get to all the rust up underneath easier, but that's going to be well on down the road for me
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 10-21-2021, 12:40 PM   #3
vin63
It's Better With Nitro
 
vin63's Avatar
 
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,261
Re: 60-63 GMC to Chevy dash swap

It took me an entire weekend to carefully cut out the dash of a 63 C10. It's doable, but it takes a lot of patience and uninterrupted time (wear a face shield).
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside
Pontiac 462 ci, Kauffman D-Port alum. heads
4L80E, narrowed sheetmetal Ford 9-inch
Tubular front and rear suspension
Custom 6-piston front disc and 4-piston rear disc brakes
vin63 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com