Help Identify 1967? NOS Dash Bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jmader** · 03-08-2014, 03:00 PM

I bought this bezel from board member Robert Paul Thomas and am a little confused about it. The box has part # 6482923 on it but the back has numbers 6481631 black and 6481633 fawn. As you can see in the pictures it has WIPER-WASHER instead of WIPERS and where CHOKE should be molded in the plastic there is nothing. Ideas?

**lolife99** · 03-08-2014, 03:04 PM

I think the "choke delete" bezels had nothing above the choke opening.
They just had the "GM" emblem shown below.

Are you interested in selling this bezel?

SS Tim · 03-08-2014, 04:23 PM

Had a nice write up for you but the server was busy and dumped it. Already have 30 plus min in this research. Don't have time to redo it.

1967-68 Medium Duty "C" truck part.
Discontinued 81 no supercession.

**michael bustamante** · 03-08-2014, 06:07 PM

Looks like a 68 to me

sboris · 03-08-2014, 06:18 PM

I'm am not where I can look, so I don't remember if it has wiper and washer. But, my choke hole is blank. It has an external tab that says choke. So.. Yours looks correct as far as that goes.. Mine is 68.

SS Tim · 03-08-2014, 06:53 PM

Its a service part that replaced an earlier part 6457904.
It will be a functional replacement and not an exact duplicate of the assembly line part in many cases. Thus it stands to reason a 67-68 trim part is going to look more like the 68 than the 67 if there were any running changes.

The ...631 ...633 part numbers are probably original production numbers as they reflect the finish options black or fawn.
They are not in the service part system I can find.

Without pictures of the full bezel it is not possible to confirm if it is a Light or in fact the Medium duty part as the box number suggests.

**jabborabbo** · 03-08-2014, 07:00 PM

I've got 4 '67 gauge bezels plus the idiot light bezel that's on my truck. I don't know what numbers are on the back of the bezel on my truck, but it and one other bezel has just "Wipers" in the upper left corner...that gauge bezel has "FAWN 6459615" and "BLACK 6458042" on the back. The other three gauge bezels all have "Wiper-Washer" in the upper left corner and have "FAWN 6481633" and "BLACK 6481631" on the back. All of them have "CHOKE" in the upper right corner, and all have silver paint trim rather than chrome.

Hope this helps.

**special-K** · 03-09-2014, 01:31 PM

'68.

SS Tim · 03-09-2014, 02:17 PM

So is the bezel you have a Medium Duty (C40 up) as the parts manual lists it? Or is it a Light Duty (C10-30) reboxed? The difference is in the steering column cutout. Like I said earlier a full picture would help here.

**jmader** · 03-09-2014, 05:55 PM

Ok thanks for all your input guys. Here's another picture of the whole bezel

**special-K** · 03-09-2014, 10:56 PM

Quote:

Originally Posted by jmader

I bought this bezel from board member Robert Paul Thomas and am a little confused about it. The box has part # 6482923 on it but the back has numbers 6481631 black and 6481633 fawn. As you can see in the pictures it has WIPER-WASHER instead of WIPERS and where CHOKE should be molded in the plastic there is nothing. Ideas?

The box is incorrect for the part. The box is for medium duty and the part is light duty.

Quote:

Originally Posted by SS Tim

So is the bezel you have a Medium Duty (C40 up) as the parts manual lists it? Or is it a Light Duty (C10-30) reboxed? The difference is in the steering column cutout. Like I said earlier a full picture would help here.

The numbers on the bezel say it's a light duty,which now the pictures show

BMERDOC · 03-09-2014, 11:14 PM

Any way you slice it its a nice and rare bezel. A bezel without "choke" over the choke hole can be highly coveted by those wanting to run their choke delete emblem (ask me how I know). Especially to us two-year only guys. Nice piece!

03-08-2014, 03:00 PM	#1
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Help Identify 1967? NOS Dash Bezel I bought this bezel from board member Robert Paul Thomas and am a little confused about it. The box has part # 6482923 on it but the back has numbers 6481631 black and 6481633 fawn. As you can see in the pictures it has WIPER-WASHER instead of WIPERS and where CHOKE should be molded in the plastic there is nothing. Ideas? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

03-08-2014, 03:04 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,684	Re: Help Identify 1967? NOS Dash Bezel I think the "choke delete" bezels had nothing above the choke opening. They just had the "GM" emblem shown below. Are you interested in selling this bezel? Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-08-2014, 04:23 PM	#3
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,504	Re: Help Identify 1967? NOS Dash Bezel Had a nice write up for you but the server was busy and dumped it. Already have 30 plus min in this research. Don't have time to redo it. 1967-68 Medium Duty "C" truck part. Discontinued 81 no supercession. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

03-08-2014, 06:07 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,818	Re: Help Identify 1967? NOS Dash Bezel Looks like a 68 to me __________________ 1967custom

03-08-2014, 06:18 PM	#5
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,016	Re: Help Identify 1967? NOS Dash Bezel I'm am not where I can look, so I don't remember if it has wiper and washer. But, my choke hole is blank. It has an external tab that says choke. So.. Yours looks correct as far as that goes.. Mine is 68. __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

03-08-2014, 06:53 PM	#6
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,504	Re: Help Identify 1967? NOS Dash Bezel Its a service part that replaced an earlier part 6457904. It will be a functional replacement and not an exact duplicate of the assembly line part in many cases. Thus it stands to reason a 67-68 trim part is going to look more like the 68 than the 67 if there were any running changes. The ...631 ...633 part numbers are probably original production numbers as they reflect the finish options black or fawn. They are not in the service part system I can find. Without pictures of the full bezel it is not possible to confirm if it is a Light or in fact the Medium duty part as the box number suggests. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

03-08-2014, 07:00 PM	#7
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 741	Re: Help Identify 1967? NOS Dash Bezel I've got 4 '67 gauge bezels plus the idiot light bezel that's on my truck. I don't know what numbers are on the back of the bezel on my truck, but it and one other bezel has just "Wipers" in the upper left corner...that gauge bezel has "FAWN 6459615" and "BLACK 6458042" on the back. The other three gauge bezels all have "Wiper-Washer" in the upper left corner and have "FAWN 6481633" and "BLACK 6481631" on the back. All of them have "CHOKE" in the upper right corner, and all have silver paint trim rather than chrome. Hope this helps.

03-09-2014, 01:31 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Help Identify 1967? NOS Dash Bezel '68. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-09-2014, 02:17 PM	#9
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,504	Re: Help Identify 1967? NOS Dash Bezel So is the bezel you have a Medium Duty (C40 up) as the parts manual lists it? Or is it a Light Duty (C10-30) reboxed? The difference is in the steering column cutout. Like I said earlier a full picture would help here. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

03-09-2014, 05:55 PM	#10
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Help Identify 1967? NOS Dash Bezel Ok thanks for all your input guys. Here's another picture of the whole bezel __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

03-09-2014, 11:14 PM	#12
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: Help Identify 1967? NOS Dash Bezel Any way you slice it its a nice and rare bezel. A bezel without "choke" over the choke hole can be highly coveted by those wanting to run their choke delete emblem (ask me how I know). Especially to us two-year only guys. Nice piece! __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.