OK ALL MUST GO - Bodies, Sheetmetal, Hard Top & More - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MoreLoveThanMoney · 11-18-2012, 10:48 AM

Quote:

Originally Posted by Bigb401

Do you still have a clean driver and passenger door?
Also looking for the rear legs on the back bench seat for a blazer? Any luck that you have these?
Posted via Mobile Device

I do still have some doors
Posted via Mobile Device

MoreLoveThanMoney · 11-18-2012, 10:49 AM

Quote:

Originally Posted by rayray767

Yep that roll bar would be nice to have ...let me know as well...

I sold the roll bar. Thanks for asking though
Posted via Mobile Device

Bigb401 · 11-18-2012, 03:02 PM

Quote:

Originally Posted by MoreLoveThanMoney

I do still have some doors
Posted via Mobile Device

Can I see some pics of the doors and how much u sellin for? How much would shipping be to Wisconsin 53105?
Posted via Mobile Device

gringoloco · 11-24-2012, 12:01 AM

Still have the Blazer top? Photos if you do?
Posted via Mobile Device

themb2g · 12-09-2012, 10:51 PM

do you have the tailgate weather stripping retainers by chance? or the small wedge piece that screws above the striker plates?

SACRAMENTO 71 · 12-15-2012, 01:50 PM

HELLO MOREMONEYTHANLOVE!! Do you have visors for the double wall top, the ones that have the corner brackets built into them? Thank you Nick

MoreLoveThanMoney · 12-23-2012, 11:14 AM

Quote:

Originally Posted by themb2g

do you have the tailgate weather stripping retainers by chance? or the small wedge piece that screws above the striker plates?

Sorry for the delayed response but no I do not have those pieces. Wish I could have helped but thanks for asking.
Posted via Mobile Device

MoreLoveThanMoney · 12-23-2012, 11:15 AM

Quote:

Originally Posted by SACRAMENTO 71

HELLO MOREMONEYTHANLOVE!! Do you have visors for the double wall top, the ones that have the corner brackets built into them? Thank you Nick

Is there something different about the visors you are looking for or are all blazer visors the same? If the same, I believe I do have a pair
Posted via Mobile Device

71GeneralMotorsCorp · 12-29-2012, 01:38 AM

Just so everyone knows, the 4x4 blazer with double wall top is sold to me.

Brianhill6 · 12-29-2012, 09:11 AM

I am looking for a blazer stock speaker, the one that hangs under the dash. Do you have one of them?

MoreLoveThanMoney · 12-29-2012, 09:52 AM

Quote:

Originally Posted by Brianhill6

I am looking for a blazer stock speaker, the one that hangs under the dash. Do you have one of them?

Sorry I do not buy thanks for asking. I don't think I've ever even seen one.
Posted via Mobile Device

toyplumbertrucks · 12-30-2012, 12:08 PM

I have been looking for a decent 4wd Blazer frame(not a roller unless that is what you have). Someone cut the back of mine to but a step bumper on it. I also could use a set of doors, and possibly a drivers side quarter panel (mine is rough but I have a spare that is a little less than perfect). I am not gonna start this project right away , but if you have any of these and the price is right I may jump on it. Let me know. I am near Chicago so I would probably make the trip since it would be a two day deal and fuel cost would be reasonable, depending on price of parts.

Brianhill6 · 12-30-2012, 07:22 PM

Do you have any rear wheel wells?

MoreLoveThanMoney · 01-03-2013, 08:36 PM

Quote:

Originally Posted by toyplumbertrucks

I have been looking for a decent 4wd Blazer frame(not a roller unless that is what you have). Someone cut the back of mine to but a step bumper on it. I also could use a set of doors, and possibly a drivers side quarter panel (mine is rough but I have a spare that is a little less than perfect). I am not gonna start this project right away , but if you have any of these and the price is right I may jump on it. Let me know. I am near Chicago so I would probably make the trip since it would be a two day deal and fuel cost would be reasonable, depending on price of parts.

Heres what I can offer you. I have a converted 2wd blazer. I have all of the 4wd brackets that came off of it but I do not have the front axle. I do have a nice passenger side but I alsohave an entire blazer tub. I can send you a link to the photos of it. It has a title and is an a/c dash. You could use those sides on yours and sell the rest or use the whole tub. Your choice. Let me know what you think and I can get you pics and we can talk price.

Quote:

Originally Posted by Brianhill6

Do you have any rear wheel wells?

I have one or two sets left. I know they do not have rusted lips but may have a couple of bruises. The set is cheap but the shipping is not. I shipped a pair to somone else and it seems like it was around $30 to ship. Without checking on freight, I would be around $60 for a pair shipped.

blazer1972 · 01-14-2013, 06:50 PM

how much for the front top hold down bracket?

KShepJr · 01-17-2013, 09:13 PM

If your tub is still available I would be interested depending upon condition. Also would be interested in doors if you have any, I need both sides.

Thanks!

roOstersan · 01-18-2013, 01:59 PM

Any chance of you still having a locking blazer hatch handle?
Posted via Mobile Device

the_69_C10 · 01-21-2013, 11:56 PM

Could you ship the gas tank? If so, does it have all the sending unit, straps, etc.

MoreLoveThanMoney · 01-22-2013, 04:26 PM

Quote:

Originally Posted by blazer1972

how much for the front top hold down bracket?

Im sorry I dont have any of the hold down brackets. They have already been sold.

Quote:

Originally Posted by KShepJr

If your tub is still available I would be interested depending upon condition. Also would be interested in doors if you have any, I need both sides.Thanks!

The tub is still for sell. It is actually on ebay right now.
http://cgi.ebay.com/ebaymotors/1972-...item4d08e2af0e
Thanks![/QUOTE]

Quote:

Originally Posted by roOstersan

Any chance of you still having a locking blazer hatch handle?
Posted via Mobile Device

I do not have a hatch handle. Thanks for asking though.

Quote:

Originally Posted by the_69_C10

Could you ship the gas tank? If so, does it have all the sending unit, straps, etc.

I sold the one good tank I have and I shipped it. I have on emore tank but it is just the tank. No filler neck or straps. Its in rebuildable condition.

the_69_C10 · 01-22-2013, 10:07 PM

Quote:

Originally Posted by MoreLoveThanMoney

Im sorry I dont have any of the hold down brackets. They have already been sold.

The tub is still for sell. It is actually on ebay right now.
http://cgi.ebay.com/ebaymotors/1972-...item4d08e2af0e
Thanks!

I do not have a hatch handle. Thanks for asking though.

I sold the one good tank I have and I shipped it. I have on emore tank but it is just the tank. No filler neck or straps. Its in rebuildable condition.[/QUOTE]

I'll take it, but it'll have to be dirt cheap. I'm in a tight spot.

JDahl · 01-23-2013, 01:53 PM

Orange Blazer still there?

brian1971 · 01-29-2013, 12:00 PM

Do you have any vac/tach dash tins and 71 driver side sport mirrors mounting bracket with screws.Also looking for knob on end of bench seat lever.
Thanks Brian
Posted via Mobile Device

MoreLoveThanMoney · 01-29-2013, 01:56 PM

Quote:

Originally Posted by brian1971

Do you have any vac/tach dash tins and 71 driver side sport mirrors mounting bracket with screws.Also looking for knob on end of bench seat lever.
Thanks Brian
Posted via Mobile Device

Cant help with the first items but maybe the knobs. Are bench seat knobs different than the buckets?

brian1971 · 01-29-2013, 11:45 PM

Thanks for reply,don't know if there same as buckets
Posted via Mobile Device

70chevyolbetty · 02-04-2013, 04:39 AM

if u cut up any of the blazers i need the windshield frame.? pm me and send pics will pay shipping costs as well. thanks

11-24-2012, 12:01 AM	#129
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Still have the Blazer top? Photos if you do? Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-09-2012, 10:51 PM	#130
themb2g Registered User Join Date: Jul 2010 Location: Portland, Oregon Posts: 411	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More do you have the tailgate weather stripping retainers by chance? or the small wedge piece that screws above the striker plates? __________________ Check out my build: 1972 LQ4 Swap http://67-72chevytrucks.com/vboard/s...=1#post5427693

12-15-2012, 01:50 PM	#131
SACRAMENTO 71 Registered User Join Date: Aug 2012 Location: Sacramento, CA Posts: 242	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More HELLO MOREMONEYTHANLOVE!! Do you have visors for the double wall top, the ones that have the corner brackets built into them? Thank you Nick __________________ 68 C10 SWB W/ 72 FRONT CLIP 343SB TH400 64 C10 SWB 406SB TH400 74 SUBURBAN 454BB TH400 78 K10 SWB 350 TH350 6" ON 35" BFG MUD 71 K5 350 W/ TBI 700R4 6" ON 38" BFG MUD 00 K3500 DRW BIG BLOCK "DRINKING PRBLM"

12-29-2012, 01:38 AM	#134
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Just so everyone knows, the 4x4 blazer with double wall top is sold to me.

12-29-2012, 09:11 AM	#135
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More I am looking for a blazer stock speaker, the one that hangs under the dash. Do you have one of them?

12-30-2012, 12:08 PM	#137
toyplumbertrucks Registered User Join Date: Aug 2012 Location: st. john, in Posts: 280	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More I have been looking for a decent 4wd Blazer frame(not a roller unless that is what you have). Someone cut the back of mine to but a step bumper on it. I also could use a set of doors, and possibly a drivers side quarter panel (mine is rough but I have a spare that is a little less than perfect). I am not gonna start this project right away , but if you have any of these and the price is right I may jump on it. Let me know. I am near Chicago so I would probably make the trip since it would be a two day deal and fuel cost would be reasonable, depending on price of parts. Attached Images

12-30-2012, 07:22 PM	#138
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have any rear wheel wells?

01-14-2013, 06:50 PM	#140
blazer1972 Registered User Join Date: Oct 2012 Location: CA Posts: 45	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More how much for the front top hold down bracket?

01-17-2013, 09:13 PM	#141
KShepJr Registered User Join Date: Apr 2012 Location: Greenwich, NJ Posts: 6	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More If your tub is still available I would be interested depending upon condition. Also would be interested in doors if you have any, I need both sides. Thanks!

01-18-2013, 01:59 PM	#142
roOstersan Registered User Join Date: Aug 2012 Location: Vacaville, Ca Posts: 98	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Any chance of you still having a locking blazer hatch handle? Posted via Mobile Device

01-21-2013, 11:56 PM	#143
the_69_C10 Registered User Join Date: Dec 2012 Location: Tifton, Georgia Posts: 115	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Could you ship the gas tank? If so, does it have all the sending unit, straps, etc. __________________ 1969 C-10 SWB Project 2002 Chevy Silverado Ext Cab LS Build Thread--> "Start of Something New" http://67-72chevytrucks.com/vboard/s...d.php?t=557900

01-23-2013, 01:53 PM	#146
JDahl Registered User Join Date: Jul 2008 Location: Salina, Ks Posts: 24	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Orange Blazer still there?

01-29-2013, 12:00 PM	#147
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have any vac/tach dash tins and 71 driver side sport mirrors mounting bracket with screws.Also looking for knob on end of bench seat lever. Thanks Brian Posted via Mobile Device __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

01-29-2013, 11:45 PM	#149
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Thanks for reply,don't know if there same as buckets Posted via Mobile Device __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

02-04-2013, 04:39 AM	#150
70chevyolbetty Registered User Join Date: May 2011 Location: Sylmar Posts: 59	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More if u cut up any of the blazers i need the windshield frame.? pm me and send pics will pay shipping costs as well. thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.