How about some pics of High Performance haulers. - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Couch · 03-09-2008, 05:31 AM

Quote:

Originally Posted by Super73

Couch,

I found a photo of outlaw on a street racing website and sent it to him. He might not be sooo inocent after all.. Kinda funny I got a hold of it in Cali and he is in Texas

shows that the internent can really dig up dirt.

yeah.my dad was gettin on me for racing and i dug up some **** on him from back in the day when he used to be in the game.now he doesnt say @%$# when he sees the slicks go on the truck. just be careful

Super73 · 03-07-2008, 11:35 AM

Outlaw, your right. Pictures are worth a thousand words aren't they

ostncoln · 03-07-2008, 05:44 PM

saw this one over at spring bash year before last

drbyrdman · 03-07-2008, 07:02 PM

looks to be a little rub mark on the rear wheel well

*87 chevy silverado* · 07-15-2010, 04:07 PM

Quote:

Originally Posted by ostncoln

saw this one over at spring bash year before last

here is a video i fond on youtube of it

YouTube- flat black blown 67 chevy

onechevrolet · 08-14-2010, 08:35 PM

Quote:

Originally Posted by ostncoln

saw this one over at spring bash year before last

does anybody know what size tire he has in the rear ??????

btd71 · 01-12-2014, 01:27 AM

Quote:

Originally Posted by ostncoln

saw this one over at spring bash year before last

that is BADASS!!!

Couch · 03-07-2008, 10:35 PM

Quote:

Originally Posted by Super73

Outlaw, your right. Pictures are worth a thousand words aren't they

lol

he added a channel to the fender. looks bad a@# tuckin that tire like that.

djracer · 03-07-2008, 07:33 PM

I noticed that too! its a nasty and low ride!

71Dragtruck · 03-07-2008, 08:06 PM

Kinda looka like body work, like a pannel was added in? Is the wheel opening dropped, compare it to the stepside above, pretty sure it's been dropped, or the whole fender made taller also, or does it just look that way cause of the strip?

70' GMC · 03-07-2008, 08:35 PM

Would it be heavy if it had an 8ft bed or too hard to control. I don't think I would do that to mine if I had it restored, just to put it on the dragstrip and total it. Either way they are nice and very loud.

djracer · 03-12-2008, 04:19 AM

That's f***ing sweet!

SmokeShow · 03-12-2008, 08:49 AM

Quote:

Originally Posted by djracer

That's f***ing sweet!

yeah, he's rebuilding during the off season and hoping to be one of the first into the 8s in his class.

He is also building an Altered t-body car. I'd be guessing but I'd say they'll be going for sub 7sec passes in it.

Chris Caulkin is co-owner of the truck. I understand he is a pretty well known chassis guy.

C-ya

71Dragtruck · 03-12-2008, 09:04 AM

I had posted up about that truck before, here's a link about halfway down the page is some more pics.

http://www.dragtrucks.com/photo/hotdiesel/hotdiesel.htm

bigjimzlll · 04-03-2008, 12:43 AM

Here's a video from last weekend. 9.67 at 140mph
Click here to watch launch-540

matty&d67slb · 05-08-2008, 05:22 AM

All these trucks are really nice,I saved my 67 steplongbed from a kid that didnt know what was going on so i hope one day(soon!)mine will be nice like all the others on this website

twotons · 09-30-2008, 03:08 AM

Here is mine, 66 chevy long fleet. Cast headed 489 with NX Gemini twin shot plate, with pump gas it has gone 11.17 @ 120 and on a 200 shot and a 1.43 60, slighty lighting the tires went 9.97 @ 131. OH and it wieghs 4275 with me, fuel and a 15 pound bottle.

bigdiceman · 10-01-2008, 11:29 AM

just want to know if anyone offers some nice fiberglass fenders for a 67 . I dont want the whole entire hood grill ,fenderswith the flip up kit. I want to get weight off looking for a stock replacement fender. Has anyone dealt with US body source? Are the hoods any good?
Thanks
Mark

twotons · 10-01-2008, 12:20 PM

Quote:

Originally Posted by bigdiceman

just want to know if anyone offers some nice fiberglass fenders for a 67 . I dont want the whole entire hood grill ,fenderswith the flip up kit. I want to get weight off looking for a stock replacement fender. Has anyone dealt with US body source? Are the hoods any good?
Thanks
Mark

USbodysource.com They have anything and everything you need.

'72 Shorty · 10-09-2008, 12:32 AM

The best one I have of mine. I finally got it on the track. Ran a 13.40 but I forgot to check the throttle adjustment until I got home, I was at less than 3/4 throttle. I'm ready to go again come spring.

djracer · 10-09-2008, 07:55 AM

Quote:

Originally Posted by '72 Shorty

The best one I have of mine. I finally got it on the track. Ran a 13.40 but I forgot to check the throttle adjustment until I got home, I was at less than 3/4 throttle. I'm ready to go again come spring.

It sounds pretty strong what under the hood?

68 C-10 KID · 12-13-2008, 01:33 AM

Sup guys I was told to post a few pic in here. 68' 406 street truck.

68 C-10 KID · 12-13-2008, 02:10 AM

Quote:

Originally Posted by 68 C-10 KID

Sup guys I was told to post a few pic in here. 68' 406 street truck.

I believe that was the thunder truck drags or the Chevy showdown, Thank you.

LuckyHenriksen · 12-13-2008, 02:03 AM

That looks great! That looks like the Woodburn strip, what race was that? Your truck looks sweet, and that motor is awesome.

djracer · 12-13-2008, 12:36 PM

Sweet truck! It looks like you got lots of cheese in the small block. What does it run? Come join the rest of the gear heads in the racing section more often.

03-07-2008, 11:35 AM	#2
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Post pics of truck drag racing or racing trucks Outlaw, your right. Pictures are worth a thousand words aren't they

03-07-2008, 05:44 PM	#3
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: Post pics of truck drag racing or racing trucks saw this one over at spring bash year before last __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

03-07-2008, 07:02 PM	#4
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Post pics of truck drag racing or racing trucks looks to be a little rub mark on the rear wheel well

03-07-2008, 07:33 PM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Post pics of truck drag racing or racing trucks I noticed that too! its a nasty and low ride! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-07-2008, 08:06 PM	#10
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Post pics of truck drag racing or racing trucks Kinda looka like body work, like a pannel was added in? Is the wheel opening dropped, compare it to the stepside above, pretty sure it's been dropped, or the whole fender made taller also, or does it just look that way cause of the strip? __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 03-07-2008 at 08:08 PM.

03-07-2008, 08:35 PM	#11
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: Post pics of truck drag racing or racing trucks Would it be heavy if it had an 8ft bed or too hard to control. I don't think I would do that to mine if I had it restored, just to put it on the dragstrip and total it. Either way they are nice and very loud. __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

03-12-2008, 04:19 AM	#12
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Post pics of truck drag racing or racing trucks That's f***ing sweet! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-12-2008, 09:04 AM	#14
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Post pics of truck drag racing or racing trucks I had posted up about that truck before, here's a link about halfway down the page is some more pics. http://www.dragtrucks.com/photo/hotdiesel/hotdiesel.htm __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

04-03-2008, 12:43 AM	#15
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: Post pics of truck drag racing or racing trucks Here's a video from last weekend. 9.67 at 140mph Click here to watch launch-540 __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

05-08-2008, 05:22 AM	#16
matty&d67slb Registered User Join Date: May 2008 Location: la habra, Ca Posts: 6	Re: Post pics of truck drag racing or racing trucks All these trucks are really nice,I saved my 67 steplongbed from a kid that didnt know what was going on so i hope one day(soon!)mine will be nice like all the others on this website

09-30-2008, 03:08 AM	#17
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: Post pics of truck drag racing or racing trucks Here is mine, 66 chevy long fleet. Cast headed 489 with NX Gemini twin shot plate, with pump gas it has gone 11.17 @ 120 and on a 200 shot and a 1.43 60, slighty lighting the tires went 9.97 @ 131. OH and it wieghs 4275 with me, fuel and a 15 pound bottle. Attached Images __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif Last edited by twotons; 09-30-2008 at 03:09 AM.

10-01-2008, 11:29 AM	#18
bigdiceman Registered User Join Date: Feb 2008 Location: Humble,Texas Posts: 18	Re: Post pics of truck drag racing or racing trucks just want to know if anyone offers some nice fiberglass fenders for a 67 . I dont want the whole entire hood grill ,fenderswith the flip up kit. I want to get weight off looking for a stock replacement fender. Has anyone dealt with US body source? Are the hoods any good? Thanks Mark

10-09-2008, 12:32 AM	#20
'72 Shorty I finally got an avatar Join Date: Jan 2003 Location: Cheney, WA Posts: 180	Re: Post pics of truck drag racing or racing trucks The best one I have of mine. I finally got it on the track. Ran a 13.40 but I forgot to check the throttle adjustment until I got home, I was at less than 3/4 throttle. I'm ready to go again come spring. Attached Images __________________ -72 C-10 short step (straight line only) 12.922/102.28 -69 C-20 on Propane (DD) -69 C-10 -56 Mack B-753LS (tow rig) -94 Chev K2500 Short Ex-Cab -89 Isuzu Trooper...Kinda -03 Kawasaki KFX-400 -05 Suzuki DRZ-400S

12-13-2008, 01:33 AM	#22
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: Post pics of truck drag racing or racing trucks Sup guys I was told to post a few pic in here. 68' 406 street truck. Attached Images

12-13-2008, 02:03 AM	#24
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Post pics of truck drag racing or racing trucks That looks great! That looks like the Woodburn strip, what race was that? Your truck looks sweet, and that motor is awesome. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here



Register or Log In To remove these advertisements.

12-13-2008, 12:36 PM	#25
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Post pics of truck drag racing or racing trucks Sweet truck! It looks like you got lots of cheese in the small block. What does it run? Come join the rest of the gear heads in the racing section more often. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.