Need Template to cut A/C Holes in Dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jmader** · 02-01-2014, 10:09 PM

Where can I find a template to cut all 3 holes in my dash for the original air conditioning vents? Thanks.

9teen69 · 02-01-2014, 10:44 PM

I can send you the PDF template for the corner ones I received from Rcrahn. PM me your email.

More info here:
http://67-72chevytrucks.com/vboard/s...d.php?t=582197

**jmader** · 02-01-2014, 10:49 PM

Ok thanks. PM inbound.

9teen69 · 02-01-2014, 11:16 PM

Template sent...enjoy!

**jmader** · 02-03-2014, 11:49 AM

Thanks I printed them off and am planning on cutting them out this week. Do you have the center vent template by chance or is it just a rectangle?

67ChevyRedneck · 02-03-2014, 01:06 PM

There's one on here, page 17:

http://vintageair.com/DownloadsSecti...ols)%20Ine.pdf

trkfrk · 02-03-2014, 01:27 PM

Quote:

Originally Posted by 9teen69

I can send you the PDF template for the corner ones I received from Rcrahn. PM me your email.

More info here:
http://67-72chevytrucks.com/vboard/s...d.php?t=582197

9teen69 - I also need a copy of the template. My cab is going to paint later this week. Can I PM you my email address? Thanks in advance.

Mark

9teen69 · 02-03-2014, 02:33 PM

Email sent TRKFRK!

9teen69 · 02-03-2014, 02:35 PM

67ChevyRedneck install thread is the best I've seen...
http://www.67-72chevytrucks.com/vboa...d.php?t=249479

**jmader** · 02-03-2014, 02:39 PM

Thanks for the input guys!!

trkfrk · 02-05-2014, 12:17 AM

Quote:

Originally Posted by 9teen69

Email sent TRKFRK!

Template worked perfect! Thanks

trkfrk · 02-05-2014, 12:19 AM

Pic 2

9teen69 · 02-05-2014, 12:50 AM

Niice...What did you use to cut it?

trkfrk · 02-05-2014, 01:07 AM

Quote:

Originally Posted by 9teen69

Niice...What did you use to cut it?

A small hand held jig saw. Worked perfect. I first cut it undersized then used a flapper wheel to ease out the hole.

trkfrk · 02-05-2014, 01:09 AM

Pic 2

mike88a · 02-05-2014, 01:36 AM

Quote:

Originally Posted by 9teen69

I can send you the PDF template for the corner ones I received from Rcrahn. PM me your email.

More info here:
http://67-72chevytrucks.com/vboard/s...d.php?t=582197

Sorry to jump on board. But can you email it to me as well. I PM'd my email address to you.

THANKS!

9teen69 · 02-05-2014, 01:56 AM

Cool, thanks for the advice.

9teen69 · 02-05-2014, 01:57 AM

Mike88a - template sent.

FL71C10 · 06-07-2015, 04:03 PM

I am getting ready to install factory style vents in my truck. Does anyone have a copy of the email template that went around in this thread? If you do, and can email it to me, please pm me and I will send you my email.

Thanks!

John

PS, I've got the center vent done, just need the sides.

trkfrk · 06-08-2015, 10:24 AM

Quote:

Originally Posted by FL71C10

I am getting ready to install factory style vents in my truck. Does anyone have a copy of the email template that went around in this thread? If you do, and can email it to me, please pm me and I will send you my email.

Thanks!

John

PS, I've got the center vent done, just need the sides.

Just sent you a PM. Good luck and post pics.

FL71C10 · 06-08-2015, 09:06 PM

Got it, thanks TRKFRK!

rthomas · 07-07-2015, 04:17 PM

I hope you're not getting tired of people asking for the side a/c templates. I've been searching the web & so far this is the only site that has them. Could I possibly get a copy also?

FL71C10 · 07-07-2015, 04:39 PM

Here you go. This is what trkfrk sent to me.

noskiki6 · 09-29-2017, 02:37 AM

Hi, I also have been looking for the template so I can download it but I can't find it. If is not a lot of trouble can you share the template with me thank you in advance.

Shinysideup · 09-29-2017, 08:48 AM

It is right above your post noskiki6

02-01-2014, 10:09 PM	#1
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,485	Need Template to cut A/C Holes in Dash Where can I find a template to cut all 3 holes in my dash for the original air conditioning vents? Thanks. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-01-2014, 10:44 PM	#2
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Need Template to cut A/C Holes in Dash I can send you the PDF template for the corner ones I received from Rcrahn. PM me your email. More info here: http://67-72chevytrucks.com/vboard/s...d.php?t=582197 __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-01-2014, 10:49 PM	#3
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,485	Re: Need Template to cut A/C Holes in Dash Ok thanks. PM inbound. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-01-2014, 11:16 PM	#4
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Need Template to cut A/C Holes in Dash Template sent...enjoy! __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-03-2014, 11:49 AM	#5
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,485	Re: Need Template to cut A/C Holes in Dash Thanks I printed them off and am planning on cutting them out this week. Do you have the center vent template by chance or is it just a rectangle? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-03-2014, 01:06 PM	#6
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Need Template to cut A/C Holes in Dash There's one on here, page 17: http://vintageair.com/DownloadsSecti...ols)%20Ine.pdf __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-03-2014, 02:33 PM	#8
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Need Template to cut A/C Holes in Dash Email sent TRKFRK! __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-03-2014, 02:35 PM	#9
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Need Template to cut A/C Holes in Dash 67ChevyRedneck install thread is the best I've seen... http://www.67-72chevytrucks.com/vboa...d.php?t=249479 __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-03-2014, 02:39 PM	#10
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,485	Re: Need Template to cut A/C Holes in Dash Thanks for the input guys!! __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-05-2014, 12:19 AM	#12
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Need Template to cut A/C Holes in Dash Pic 2 Attached Images __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

02-05-2014, 12:50 AM	#13
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Need Template to cut A/C Holes in Dash Niice...What did you use to cut it? __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-05-2014, 01:09 AM	#15
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Need Template to cut A/C Holes in Dash Pic 2 Attached Images __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

02-05-2014, 01:56 AM	#17
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Need Template to cut A/C Holes in Dash Cool, thanks for the advice. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-05-2014, 01:57 AM	#18
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Need Template to cut A/C Holes in Dash Mike88a - template sent. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

06-07-2015, 04:03 PM	#19
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: Need Template to cut A/C Holes in Dash I am getting ready to install factory style vents in my truck. Does anyone have a copy of the email template that went around in this thread? If you do, and can email it to me, please pm me and I will send you my email. Thanks! John PS, I've got the center vent done, just need the sides. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.



Register or Log In To remove these advertisements.

06-08-2015, 09:06 PM	#21
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: Need Template to cut A/C Holes in Dash Got it, thanks TRKFRK! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

07-07-2015, 04:17 PM	#22
rthomas Registered User Join Date: Apr 2012 Location: Ashville Posts: 6	Re: Need Template to cut A/C Holes in Dash I hope you're not getting tired of people asking for the side a/c templates. I've been searching the web & so far this is the only site that has them. Could I possibly get a copy also?

09-29-2017, 02:37 AM	#24
noskiki6 Registered User Join Date: Apr 2016 Location: Sd CA Posts: 28	Re: Need Template to cut A/C Holes in Dash Hi, I also have been looking for the template so I can download it but I can't find it. If is not a lot of trouble can you share the template with me thank you in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.