The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-05-2022, 08:18 PM   #1
BIG ORANGE
Senior Member
 
BIG ORANGE's Avatar
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,742
Cargo panel material

What are guys using to make up your cargo panels with? Built the bed up with the tops of old rusted out doors, so stock material want work because there gonna be taller.
Got any idears,
Thanxs
__________________

Things happen for a reason!
BIG ORANGE is offline   Reply With Quote
Old 10-06-2022, 12:33 PM   #2
notsolo
Registered User
 
notsolo's Avatar
 
Join Date: Apr 2008
Location: Md
Posts: 2,446
Re: Cargo panel material

PVC board 4 x 8 sheet about $100 for 1/2"...also comes 3/8" + 3/4" and it's paintable.
notsolo is offline   Reply With Quote
Old 10-06-2022, 02:35 PM   #3
BIG ORANGE
Senior Member
 
BIG ORANGE's Avatar
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,742
Re: Cargo panel material

Quote:
Originally Posted by notsolo View Post
PVC board 4 x 8 sheet about $100 for 1/2"...also comes 3/8" + 3/4" and it's paintable.
Who sells this product?
Thanxs
__________________

Things happen for a reason!
BIG ORANGE is offline   Reply With Quote
Old 10-06-2022, 03:21 PM   #4
notsolo
Registered User
 
notsolo's Avatar
 
Join Date: Apr 2008
Location: Md
Posts: 2,446
Re: Cargo panel material

Possibly at Home depot, or other building supply, Azek is a name brand I used smooth on both sides, photos on post 21 on my build page.
notsolo is offline   Reply With Quote
Old 10-07-2022, 07:07 AM   #5
A1971Blazer
Senior Member
 
A1971Blazer's Avatar
 
Join Date: Nov 2013
Location: East Tennessee
Posts: 2,101
Re: Cargo panel material

I used textured black ABS plastic sheet....3/16" thick with push-on vinyl edge trim and aluminum "J" channel at the top
Name:  IMG_1590.jpg
Views: 379
Size:  57.4 KB

Name:  IMG_1589.jpg
Views: 373
Size:  42.1 KB

Name:  IMG_1410.jpg
Views: 360
Size:  65.6 KB
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............
A1971Blazer is offline   Reply With Quote
Old 10-07-2022, 09:39 AM   #6
BIG ORANGE
Senior Member
 
BIG ORANGE's Avatar
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,742
Re: Cargo panel material

Quote:
Originally Posted by A1971Blazer View Post
I used textured black ABS plastic sheet....3/16" thick with push-on vinyl edge trim and aluminum "J" channel at the top
Attachment 2222944

Attachment 2222945

Attachment 2222946
Oh yes that's the way to go, where did you buy that material at. I'm gonna checkout home depot....
Thanxs
__________________

Things happen for a reason!
BIG ORANGE is offline   Reply With Quote
Old 10-07-2022, 10:37 AM   #7
A1971Blazer
Senior Member
 
A1971Blazer's Avatar
 
Join Date: Nov 2013
Location: East Tennessee
Posts: 2,101
Re: Cargo panel material

Quote:
Originally Posted by BIG ORANGE View Post
Oh yes that's the way to go, where did you buy that material at. I'm gonna checkout home depot....
Thanxs
I bought it thru my plastic supplier....Total Plastics
I also have a .pdf file of the dimensions if you need it
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............
A1971Blazer is offline   Reply With Quote
Old 10-08-2022, 09:11 AM   #8
lks dcvn
Registered User
 
lks dcvn's Avatar
 
Join Date: Jan 2007
Location: Columbus, Ohio
Posts: 4,338
Re: Cargo panel material

I was looking to use HDPE - 1'8" thick. I believe 1 sheet (4' x 8') can be cut down and will cover both sides - haven't measured to be sure though. Waterproof, available in white/black, etc.

Link to Menards product - here

Let us know which route you go...need to do this in the future as well.
lks dcvn is offline   Reply With Quote
Old 10-08-2022, 08:50 PM   #9
BIG ORANGE
Senior Member
 
BIG ORANGE's Avatar
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,742
Re: Cargo panel material

The only thing with my build is I've built the bed up so its probably 3 or 4 inches taller than a stock blazer. I like the idear of 3/16 thickness and also in red. Is this out there guy's?
Thanxs fr any direction in this product.
__________________

Things happen for a reason!
BIG ORANGE is offline   Reply With Quote
Old 10-10-2022, 08:54 AM   #10
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,107
Re: Cargo panel material

A1971Blazer - can you PM me the PDF - will be doing this at some point as well

thanks
__________________
1972 K5 Build - plans - LS3-6L80e-One Tons.....

1971 CREWMAX Build.....at body shop for couple more years
6600DURAMAX is offline   Reply With Quote
Old 10-10-2022, 10:45 AM   #11
JJH Jimmy
Senior Member

 
JJH Jimmy's Avatar
 
Join Date: Jun 2012
Location: Schoolcraft, Michigan
Posts: 921
Re: Cargo panel material

Quote:
Originally Posted by lks dcvn View Post
I was looking to use HDPE - 1'8" thick. I believe 1 sheet (4' x 8') can be cut down and will cover both sides - haven't measured to be sure though. Waterproof, available in white/black, etc.

Link to Menards product - here

Let us know which route you go...need to do this in the future as well.
This is what i did and had my upholstery sewn into them.
Attached Images
  
__________________
1972 GMC Jimmy 4x4 LS Swap
1985 Chevy K20
1994 GMC Yukon
2021 GMC 2500HD Duramax AT4

My "It's a Jimmy Thing" Build
http://67-72chevytrucks.com/vboard/s...d.php?t=583528
Budget Build 1985 K20
http://67-72chevytrucks.com/vboard/s...d.php?t=801565
JJH Jimmy is offline   Reply With Quote
Old 10-11-2022, 09:01 PM   #12
richard2717
Equal opportunity joke ofender
 
richard2717's Avatar
 
Join Date: Oct 2011
Location: Eastern Shore of MD
Posts: 9,863
Re: Cargo panel material

Quote:
Originally Posted by BIG ORANGE View Post
The only thing with my build is I've built the bed up so its probably 3 or 4 inches taller than a stock blazer. I like the idear of 3/16 thickness and also in red. Is this out there guy's?
Thanxs fr any direction in this product.
Komatex (PVC board) can be had in 1/8" or 1/4" thickness and comes in red. If you have a sign company local to you they could order in a 4x8 sheet for you
__________________
Members I have met.
Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb
https://paypal.me/6772GMtruckparts
Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.
richard2717 is offline   Reply With Quote
Old 11-06-2022, 05:48 PM   #13
BIG ORANGE
Senior Member
 
BIG ORANGE's Avatar
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,742
Re: Cargo panel material

Quote:
Originally Posted by richard2717 View Post
Komatex (PVC board) can be had in 1/8" or 1/4" thickness and comes in red. If you have a sign company local to you they could order in a 4x8 sheet for you
Thanks Richard
I do have a sign company near me and will look into that.
__________________

Things happen for a reason!
BIG ORANGE is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com