Hazel the older Sister.... - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 07-27-2009, 09:32 AM

Here's a few more pics from this weekends progress. Here's Keith getting started on the clean up. The frame on this truck is amazingly clean. In a couple of hours, he had the frame prepped...

**N2TRUX** · 07-27-2009, 09:34 AM

A few more...

Even with a shop full of the very best Snap-On, Mac, Husky, and DeWalt have to offer, it still takes a LOT of effort to get those 40+ year old rivets out of the frame. This is the start of the pile that accumulated around the truck.

**N2TRUX** · 07-27-2009, 09:42 AM

There are 16 holes that have to be drilled or enlarged. With a sharp bit and a Snap-On air drill, it still took a LOT of effort. It didn't help matters that it was 104 outside.

**N2TRUX** · 07-27-2009, 09:45 AM

It was worth the effort in the end. With constant motivation from me and a large supply of water in the fridge, Keith made it through the day. I am determined to see this project ready for the Goodguys show in October if it kills Keith...

aggie91 · 07-27-2009, 11:33 AM

Quote:

Originally Posted by N2TRUX

... I am determined to see this project ready for the Goodguys show in October if it kills Keith.

Well we see who really wants to get Keith's truck done....

Keith - She is looking good, I am making plans to get up to the GG show also with my boys, I know you can get it done with motivation from friends like Ken.

n2billet · 07-27-2009, 11:55 AM

Quote:

Originally Posted by aggie91

Well we see who really wants to get Keith's truck done....

Keith - She is looking good, I am making plans to get up to the GG show also with my boys, I know you can get it done with motivation from friends like Ken.

We'll see.... I've got a lot of stuff going on at work and I have a few trips ahead to support my job. Ken may be disappointed. :-)

SCOTI · 07-27-2009, 12:47 PM

Quote:

Originally Posted by n2billet

We'll see.... I've got a lot of stuff going on at work and I have a few trips ahead to support my job. Ken may be disappointed. :-)

Get a punch list going & I'll assist where needed.

**67cheby** · 07-27-2009, 12:58 PM

Hey i have this same exact truck my grandfather drove for 25 years i am now restoring 67 swb big back glass, somewhere along the way we have lost the glove box lid (spid) i cant believe this happened anyway , is there any way you could send me a closeup picture or a copy of the spid label i think the only difference in our trucks is the color mine was black with red interior, i would sure appreciate it Thank you Mike Losh 1 479 599 9664

**N2TRUX** · 07-27-2009, 04:32 PM

Quote:

Originally Posted by aggie91

Well we see who really wants to get Keith's truck done....

Appearently your not the only one that gets that impression. Keith has always been very generous about giving his buddies with post 72 trucks a ride in the show. This was my chance to return the favor and offer motivation and a little help.

n2billet · 07-27-2009, 06:08 PM

Quote:

Originally Posted by 67cheby

Hey i have this same exact truck my grandfather drove for 25 years i am now restoring 67 swb big back glass, somewhere along the way we have lost the glove box lid (spid) i cant believe this happened anyway , is there any way you could send me a closeup picture or a copy of the spid label i think the only difference in our trucks is the color mine was black with red interior, i would sure appreciate it Thank you Mike Losh 1 479 599 9664

I'll PM the spid to you in a few days when I get a chance to get back out there.

Quote:

Originally Posted by N2TRUX

Appearently your not the only one that gets that impression. Keith has always been very generous about giving his buddies with post 72 trucks a ride in the show. This was my chance to return the favor and offer motivation and a little help.

Nice words considering I treated you like an @ss today.....with that said I looked in the old mirror and didn't like the person looking back....I thought I had things back under control from a couple months ago but apparently I don't. I think I need to shelve this project and concentrate on the family for the next few months. Again, Ken I'm sorry for the words spoken this morning and I truly value your friendship and had no right to say those things.

**Hart_Rod** · 07-27-2009, 06:22 PM

Quote:

Originally Posted by n2billet

Nice words considering I treated you like an @ss today.....with that said I looked in the old mirror and didn't like the person looking back....I thought I had things back under control from a couple months ago but apparently I don't. I think I need to shelve this project and concentrate on the family for the next few months. Again, Ken I'm sorry for the words spoken this morning and I truly value your friendship and had no right to say those things.

Keith,

It takes a big person to admit when they are wrong. It's real easy to let these trucks and our projects consume us. Keep that FAITH Brotha'!

R/

my67chevytruck · 07-27-2009, 09:56 AM

great progress guys..... Ken, glad you were able to keep keith motivated. May have to see if i can swing by the shop one day to check out the project(s) in person...

Keep up the inspiring work!

Heath

rustSpot · 07-27-2009, 10:21 AM

Nice progress! Wish I would've been in town to help. Man the roof! Dig it!

rustSpot · 07-28-2009, 01:56 PM

Anything I can help with in this direction let me know.

rodstored-72 · 07-28-2009, 03:07 PM

guys,
the truck is looking awsome. i only wish i had a smidgon of the talent & fortitude to do the same thing. as far as attitudes & friends go well i have been in the same boat (i think) & my true friends always understood & to this day are still my friends. i guess it is a texas thing... lol!! anyways while i was out there i was able to meet some very terrific guys & the truck bug is huge out there. by chance do any of you texas boys know a fella by the name of pat barnhard (spelling??) or maybe even a gerald parker ? i hung out with them while out there (dallas...well mesquite & garland areas) & was really impressed with pat's painting ability. just thought i would throw a penny or two in....

keep at it!!! & good luck...
thanks!
rodstored-72

aggie91 · 07-29-2009, 07:35 AM

Keith, you are a class act yourself taking the time to put yourself out there like that here on the board. From what I see here, Ken will understand and you will be back on track in no time. We will be here for support anytime you need it.

Family first, the trucks will be around...Anyway, what you got done so far is looking good.

**67cheby** · 08-03-2009, 10:17 AM

just checking to see if you had a chance to take a picture of the spid for me, i dont mean to bug you but this is one of the first trucks i have seen just like mine thanks MIke 1 479 599 9664

crawdadfox · 08-03-2009, 04:13 PM

That is sweet! Now i know why i cant find one.......you buy them all!!

Go ahead and drill the holes for the rear Dropmember while the beds off...it will save time later!

n2billet · 08-03-2009, 04:47 PM

One last picture before I put it to bed for a while.......

bad6772 · 08-03-2009, 05:15 PM

Looks great....Wheels Tires...? Specs on offsets...?

SCOTI · 08-03-2009, 07:16 PM

Quote:

Originally Posted by bad6772

Looks great....Wheels Tires...? Specs on offsets...?

20x8.5's 5.25"BS w/255-40-20's
22x9's 5.50"BS(75% confident) w/265-40-22's

n2billet · 08-03-2009, 07:27 PM

Quote:

Originally Posted by SCOTI

20x8.5's 5.25"BS w/255-40-20's
22x9's 5.50"BS(75% confident) w/265-40-22's

You are 100% correct.........you know the numbers!

my67chevytruck · 08-03-2009, 09:51 PM

keith, Truck is looking good!
if you dont mind me asking where did you get the dolly's from. I have seen some at harbor freight, but just curious, where you picked those up from, and are those the same dollies that are supporting the jackstands in previous pics.

Thanks

Heath

n2billet · 08-03-2009, 09:57 PM

I picked them up at a local swap meet and they are the same ones that are supporting the jack-stands.

Quote:

Originally Posted by my67chevytruck

keith, Truck if looking good!
if you dont mind me asking where did you get the dolly's from. I have seen some at harbor freight, but just curious, where you picked those up from, and are those the same dollies that are supporting the jackstands in previous pics.

Thanks

Heath

72BlckButy · 08-03-2009, 09:55 PM

Lookin' good Keith!

07-27-2009, 09:32 AM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Hazel the older Sister.... Here's a few more pics from this weekends progress. Here's Keith getting started on the clean up. The frame on this truck is amazingly clean. In a couple of hours, he had the frame prepped... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 07-27-2009 at 09:37 AM.

07-27-2009, 09:34 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Hazel the older Sister.... A few more... Even with a shop full of the very best Snap-On, Mac, Husky, and DeWalt have to offer, it still takes a LOT of effort to get those 40+ year old rivets out of the frame. This is the start of the pile that accumulated around the truck. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 07-27-2009 at 09:39 AM.

07-27-2009, 09:42 AM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Hazel the older Sister.... There are 16 holes that have to be drilled or enlarged. With a sharp bit and a Snap-On air drill, it still took a LOT of effort. It didn't help matters that it was 104 outside. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

07-27-2009, 09:45 AM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Hazel the older Sister.... It was worth the effort in the end. With constant motivation from me and a large supply of water in the fridge, Keith made it through the day. I am determined to see this project ready for the Goodguys show in October if it kills Keith... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 07-27-2009 at 04:28 PM.

07-27-2009, 12:58 PM	#8
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... Hey i have this same exact truck my grandfather drove for 25 years i am now restoring 67 swb big back glass, somewhere along the way we have lost the glove box lid (spid) i cant believe this happened anyway , is there any way you could send me a closeup picture or a copy of the spid label i think the only difference in our trucks is the color mine was black with red interior, i would sure appreciate it Thank you Mike Losh 1 479 599 9664 __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-27-2009, 09:56 AM	#12
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Hazel the older Sister.... great progress guys..... Ken, glad you were able to keep keith motivated. May have to see if i can swing by the shop one day to check out the project(s) in person... Keep up the inspiring work! Heath __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

07-27-2009, 10:21 AM	#13
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: Hazel the older Sister.... Nice progress! Wish I would've been in town to help. Man the roof! Dig it!

07-28-2009, 01:56 PM	#14
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: Hazel the older Sister.... Anything I can help with in this direction let me know.

07-28-2009, 03:07 PM	#15
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,969	Re: Hazel the older Sister.... guys, the truck is looking awsome. i only wish i had a smidgon of the talent & fortitude to do the same thing. as far as attitudes & friends go well i have been in the same boat (i think) & my true friends always understood & to this day are still my friends. i guess it is a texas thing... lol!! anyways while i was out there i was able to meet some very terrific guys & the truck bug is huge out there. by chance do any of you texas boys know a fella by the name of pat barnhard (spelling??) or maybe even a gerald parker ? i hung out with them while out there (dallas...well mesquite & garland areas) & was really impressed with pat's painting ability. just thought i would throw a penny or two in.... keep at it!!! & good luck... thanks! rodstored-72

07-29-2009, 07:35 AM	#16
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Hazel the older Sister.... Keith, you are a class act yourself taking the time to put yourself out there like that here on the board. From what I see here, Ken will understand and you will be back on track in no time. We will be here for support anytime you need it. Family first, the trucks will be around...Anyway, what you got done so far is looking good. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

08-03-2009, 10:17 AM	#17
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... just checking to see if you had a chance to take a picture of the spid for me, i dont mean to bug you but this is one of the first trucks i have seen just like mine thanks MIke 1 479 599 9664 __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-03-2009, 04:13 PM	#18
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Hazel the older Sister.... That is sweet! Now i know why i cant find one.......you buy them all!! Go ahead and drill the holes for the rear Dropmember while the beds off...it will save time later! __________________ Down......with the sickness!!

08-03-2009, 04:47 PM	#19
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... One last picture before I put it to bed for a while....... Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

08-03-2009, 05:15 PM	#20
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,952	Re: Hazel the older Sister.... Looks great....Wheels Tires...? Specs on offsets...?

08-03-2009, 09:51 PM	#23
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Hazel the older Sister.... keith, Truck is looking good! if you dont mind me asking where did you get the dolly's from. I have seen some at harbor freight, but just curious, where you picked those up from, and are those the same dollies that are supporting the jackstands in previous pics. Thanks Heath __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 08-03-2009 at 09:57 PM.



Register or Log In To remove these advertisements.

08-03-2009, 09:55 PM	#25
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hazel the older Sister.... Lookin' good Keith! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.