Progress Pics...Finally - The 1947 - Present Chevrolet & GMC Truck Message Board Network

svgould · 11-23-2004, 08:38 PM

Here are a few pics of my truck. Bodyman just completed the cab, he still has to paint the top of the doors white. It will eventually get full trim with the white center. I had the front inner fenders and radiator support powder coated....looks much better then in the pics. Time to take it back to the bodyshop so he can continue.

**FRENCHBLUE72** · 11-23-2004, 08:44 PM

Very Nice!!!!!!

mocwon · 11-23-2004, 08:56 PM

That's a clean looking, sweet setup. Great job!

c-1072 · 11-23-2004, 09:04 PM

I know alot of people hate that color but it seems to sit well with me i kinda like it . I do work for a guy who has two trucks that color both are 4x4 short beds one 73 and one 72 . Will get some pics this weekend if you guys like .

vtblazer · 11-23-2004, 09:04 PM

Looks amazing, keep us posted.

ChevyDude · 11-23-2004, 10:00 PM

Looks REALLLLY Good!!!!! Keep the progress pics coming!!!

chickenwing · 11-23-2004, 10:52 PM

Piece by piece, bit by bit.... Fantastic attention to detail in the bay. I like it. Looking forward to more pics.

krue · 11-23-2004, 10:53 PM

Very good looking cab, I agree about the engine bay also.

*Gee_Emm* · 11-23-2004, 11:03 PM

Nice color, is it factory ochre or a something else?

DevinM · 11-24-2004, 12:08 AM

Beautifull truck!!! Can you give us some pics and details on the headers that you are using. Are they the Chevelle shorties? Who makes them?

**BAD4X4** · 11-24-2004, 12:34 AM

I love that color, nice look-n- truck. It just takes time, and lots of it. Keep up the good work.

svgould · 11-24-2004, 03:30 AM

Gee Emm....yes factory Ochre color. Truck was originally the "hugger orange color" but I always loved the ochre and white paint scheme.

DevinM....the headers are Chevelle 3/4 length made by Dynamax. I bought them from Summit and am happy with the fit. I have attached a better pic of them....ignore the dirty tranny!!!

**Yukon Jack** · 11-24-2004, 10:30 AM

Sure is fun to watch projects progress. Looking great!

**Palf70Step** · 11-24-2004, 10:31 AM

Looks good!

GreyHoundSteve · 11-24-2004, 10:36 AM

Good looking cab and those headers look SWEET! I have a couple of questions for you. You said that you powder coated the fender wells and rad support, did you powdercoat the frame as well? My next question is .... what does everyone use for undercoating? I need to figure something out quickly because my cab is set for primer today and should be in the booth by next week and i had originally planned to have my friend at line X hit my cab and fener wells with spray on poly but he no longer works there and they want $300 to do what i want done which seems high. Has anyone had any exp w spray on undercoatings and what type and where do you get them?

svgould · 11-24-2004, 03:42 PM

GreyHoundSteve...no the frame is not powder coated. It was done with POR-15. If you look closely, you can see where it sat out in the sun for too long (POR-15 re-acts to sunlight). It turned to a dull powder like finish, but the top layer wipes off easily and still looks good even after the sun damage?

luckydog · 11-24-2004, 03:56 PM

Can you spray single stage paint over POR15?

ChevyDude · 11-29-2004, 09:35 AM

Those Headers look really slick!!! Looks like a great option for anyone with a lowered truck. Do you have the Summit Part number? Nice truck too...keep the pics coming, you know how we all love to see the pics!!!

Thanks

70c10 · 11-29-2004, 09:38 AM

Wow!. Looks good so far.

ChevyDude · 12-01-2004, 10:27 AM

Are these the headers in your picture? I could not find a Summit part number that said Dynomax Chevelle 3/4 length header...just one that said Dynomax shorty Ceramic, Part number: WLK-86118. Just wondered if you could verify this part number.

70 shorty · 12-01-2004, 01:41 PM

Very nicely done. I agree that the attention to detail looks good.

griesel72 · 12-01-2004, 02:40 PM

Very nice, i love the color.

svgould · 12-01-2004, 05:32 PM

Chevydude is correct....the summit part number is WLK-86118.

chickenwing · 12-01-2004, 06:02 PM

Good lookin header. Like how you can do a starter change with minimal effort. Looks like the #6 and #5 plugs are a bit tight but what header doesnt mess with some plugs?
I'm saving that part # thank-you. How thick is the flange please?

svgould · 12-01-2004, 06:18 PM

chickenwing.....I'm about 1000 miles away from the truck right now, so can't answer your question on flange thickness....sorry!!

11-23-2004, 08:38 PM	#1
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Progress Pics...Finally Here are a few pics of my truck. Bodyman just completed the cab, he still has to paint the top of the doors white. It will eventually get full trim with the white center. I had the front inner fenders and radiator support powder coated....looks much better then in the pics. Time to take it back to the bodyshop so he can continue. Attached Images

11-23-2004, 08:44 PM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Very Nice!!!!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-23-2004, 08:56 PM	#3
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	That's a clean looking, sweet setup. Great job! __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

11-23-2004, 09:04 PM	#4
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Color I know alot of people hate that color but it seems to sit well with me i kinda like it . I do work for a guy who has two trucks that color both are 4x4 short beds one 73 and one 72 . Will get some pics this weekend if you guys like .

11-23-2004, 10:52 PM	#7
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Piece by piece, bit by bit.... Fantastic attention to detail in the bay. I like it. Looking forward to more pics. __________________ The truck... you hear that? No really, you did hear that?!!!

11-23-2004, 09:04 PM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Great Progress Looks amazing, keep us posted.

11-23-2004, 10:00 PM	#6
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Looks REALLLLY Good!!!!! Keep the progress pics coming!!! __________________ Alex 1971 Lil' Red 350 SBC 700R4

11-23-2004, 10:53 PM	#8
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Very good looking cab, I agree about the engine bay also. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-23-2004, 11:03 PM	#9
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Nice color, is it factory ochre or a something else?

11-24-2004, 12:08 AM	#10
DevinM Registered User Join Date: Jan 2002 Location: Deerfield, MA USA Posts: 198	Beautifull truck!!! Can you give us some pics and details on the headers that you are using. Are they the Chevelle shorties? Who makes them? __________________ '71 Chevy C-10 - Current '62 Imapla SS - Traded for my current '73 Nova Hatch - traded for ATC-350X '73 Chevelle Deluxe - First car (R.I.P) DEERFIELD, MA

11-24-2004, 12:34 AM	#11
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	I love that color, nice look-n- truck. It just takes time, and lots of it. Keep up the good work. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

11-24-2004, 03:30 AM	#12
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Answers to your questions Gee Emm....yes factory Ochre color. Truck was originally the "hugger orange color" but I always loved the ochre and white paint scheme. DevinM....the headers are Chevelle 3/4 length made by Dynamax. I bought them from Summit and am happy with the fit. I have attached a better pic of them....ignore the dirty tranny!!! Attached Images __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system Last edited by svgould; 11-24-2004 at 03:38 AM.

11-24-2004, 10:30 AM	#13
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Sure is fun to watch projects progress. Looking great! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

11-24-2004, 10:31 AM	#14
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Looks good! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-24-2004, 10:36 AM	#15
GreyHoundSteve Registered User Join Date: Oct 2004 Location: DFW TX Posts: 769	Good looking cab and those headers look SWEET! I have a couple of questions for you. You said that you powder coated the fender wells and rad support, did you powdercoat the frame as well? My next question is .... what does everyone use for undercoating? I need to figure something out quickly because my cab is set for primer today and should be in the booth by next week and i had originally planned to have my friend at line X hit my cab and fener wells with spray on poly but he no longer works there and they want $300 to do what i want done which seems high. Has anyone had any exp w spray on undercoatings and what type and where do you get them?



Register or Log In To remove these advertisements.

11-24-2004, 03:42 PM	#16
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Answer for GreyHoundSteve GreyHoundSteve...no the frame is not powder coated. It was done with POR-15. If you look closely, you can see where it sat out in the sun for too long (POR-15 re-acts to sunlight). It turned to a dull powder like finish, but the top layer wipes off easily and still looks good even after the sun damage? __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

11-24-2004, 03:56 PM	#17
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	Can you spray single stage paint over POR15? __________________ Horsepower is how FAST you hit the wall, torque is how HARD

11-29-2004, 09:35 AM	#18
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Those Headers look really slick!!! Looks like a great option for anyone with a lowered truck. Do you have the Summit Part number? Nice truck too...keep the pics coming, you know how we all love to see the pics!!! Thanks __________________ Alex 1971 Lil' Red 350 SBC 700R4

11-29-2004, 09:38 AM	#19
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Wow!. Looks good so far. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

12-01-2004, 10:27 AM	#20
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Are these the headers in your picture? I could not find a Summit part number that said Dynomax Chevelle 3/4 length header...just one that said Dynomax shorty Ceramic, Part number: WLK-86118. Just wondered if you could verify this part number. __________________ Alex 1971 Lil' Red 350 SBC 700R4

12-01-2004, 01:41 PM	#21
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	Very nicely done. I agree that the attention to detail looks good. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

12-01-2004, 02:40 PM	#22
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Very nice, i love the color. __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

12-01-2004, 05:32 PM	#23
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Headers Chevydude is correct....the summit part number is WLK-86118. __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

12-01-2004, 06:02 PM	#24
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Good lookin header. Like how you can do a starter change with minimal effort. Looks like the #6 and #5 plugs are a bit tight but what header doesnt mess with some plugs? I'm saving that part # thank-you. How thick is the flange please? __________________ The truck... you hear that? No really, you did hear that?!!!

12-01-2004, 06:18 PM	#25
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	chickenwing.....I'm about 1000 miles away from the truck right now, so can't answer your question on flange thickness....sorry!! __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

Register or Log In To remove these advertisements.