Part Time Pulling Truck Build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 02-01-2010, 06:27 PM

Very nice truck! How did you do in Indy?

6600DURAMAX · 02-02-2010, 08:55 AM

We only went for the show and cruise, the truck pulling was limited to the Diesel.

But it was packed and a great time, I would suggest it for anyone that has the time. Met Ghetto Luxury there (he was nice enought to save us a good parking spot) another example of why this site is so great. Bringing us truck people together!!!!

*SMiller* · 02-02-2010, 10:11 AM

Being from Indiana I can say the jamboree is pretty cool! Lots of old Chevy's!

**Dieselwrencher** · 02-02-2010, 04:11 PM

I had a couple of friends that pulled there. I plan on going to watch this year if at all possible.

mudmizer · 02-03-2010, 01:21 AM

Durramaxx, the truck looks beautiful. I just came across your build and like what you have done. Have you pulled with it yet? I know you have gotten all kinds of advice on your build, so I''l throw in a little as well. I have used my 68 for pulling in the 5500 bls class the last 2 years and have a few seconds and 2 firsts. I think you'll have better pulls if you can move your hitch as others have mentioned. My pics are not the best and I'm sure my hitch is not either but it works pretty well. It connects just behind the cab. You will need to add some sort of traction bars to the front. I run my rear suspension bolted solid, I can undo it for the street. As others have stated you should go to the 465 tranny and run low 2ed. I run 454 gears and crank the big block to about 7200 rpm. I'm still trying to tame the last of my front bounce and working the wheel back and forth helps a little. My class wont allow weight on the front so you may not have too much of a bouncing problem.
Good luck and I'll be watching for ideas. Try the guys at truckpulls.com lots of help there just as on our 67-72 site.

DieselEater · 02-13-2010, 07:51 PM

Turns out I am going to convert my puller back to a daily driver, and sell all my pulling mods and stuff...

Gonna throw my 470 into a swb and drag race it!

Let me know what you might need, and I'll give you a good deal.

Here's a link to what I'm selling...prices are negotiable.

http://www.network54.com/Forum/22827...stuff+for+sale

A.........
http://www.youtube.com/user/TeamFRANKENSTEIN

1Ton · 03-11-2010, 04:47 PM

Did you get to hook this truck at al last year? Curious how you made out.

6600DURAMAX · 03-11-2010, 07:19 PM

Never did pull with it last year, I really didn't get all the bugs worked out till early this year and still have a minor motor issue that just came back up last week. The motor has started throwing the power steering belt just above 2000 rpm. All the pullies appear in line and this just started so I have no idea what is going on. But none the less, I am hoping to get a couple hooks in this year but I also ended up buying a 1992 Chevy with Rockwell axles and 44'' tires to go play in the mud with so we will have to see how much time I have.

We are going to the big car show at Lake of the Ozarks the first week of May if anyone is in the area it is suppose to be a great show.

I will keep you guys posted if I get a hook or two in, for right now I will continue to do some more burnouts .......... after the ps belt issue ahahahha

6600DURAMAX · 03-11-2010, 07:21 PM

Good looking truck Mudmizer, good luck with the pulling...... keep us posted as well

pulltilbroke · 03-12-2010, 03:48 AM

After seeing this thread I'm kinda exited about seeing this truck when I grab that axle fom ya.

indyrenegade4x4 · 03-12-2010, 10:46 PM

nice ride

6600DURAMAX · 03-12-2010, 11:05 PM

Thanks Indy

Putilbroke - The house and shop are about 5 minutes apart but I would be more than happy to show it off.

indyrenegade4x4 · 03-13-2010, 11:26 PM

your welcome there are so many rides at indy jambo to see and yours is one that stuck in my head.

pulltilbroke · 03-14-2010, 04:02 AM

I hope you stay up late, From the from the sounds of it I'll be in your area around midnight or so unless I camp out in Louisville.

I'll be in touch regardless.

6600DURAMAX · 03-14-2010, 10:40 AM

Give me a call and we can work something out, what time are you thinking?

87scottsdale · 03-16-2010, 06:39 PM

when is that show at the lake i live in rolla missouri i dont know if your fimilar with that area but i would like to come on up and get some ideas for my 87. thanks

6600DURAMAX · 03-17-2010, 07:41 AM

It is the Magic Dragon Car Show, April 30 thru May2. Not for sure where, I heard the old strip, I am going with a buddy who has been there several times and no his way around. He says it is a great show. MAke sure to stop by and say hey, if you make it over.

87scottsdale · 03-17-2010, 07:05 PM

what days are you gonna be up there?

6600DURAMAX · 03-17-2010, 11:07 PM

Well it depends on if I work Friday or not, I am trying to take off and if I do we will drive down Friday morning and stay till Sunday.

6600DURAMAX · 04-22-2010, 02:08 PM

Lake of The Ozarks in a couple weeks!!!!!!

BACKWOODS MOTORSPORTS will be there!

87fleetsidedude · 04-22-2010, 06:02 PM

no offense but..........just kidding your truck is freaking killer! makes me want to build a pull truck, you did an awesome job man!

6600DURAMAX · 04-23-2010, 07:57 AM

Thanks 87Fleetside

msgross · 04-28-2010, 08:51 AM

cool build, I moved this over to the 4x4 build section...

1985-GMC · 04-30-2010, 01:31 PM

Very cool truck I like it!

propanemudtruck · 04-30-2010, 03:22 PM

Hey I was at the Indy Jamboree last year, most likely saw your truck there! The diesel pulls were amazing, as were the mud drags and the show trucks. All around best truck event I've ever been too, even though I didn't get to see the tough trucks.

Nice build, would love to see it pull

02-01-2010, 06:27 PM	#51
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,135	Re: Part Time Pulling Truck Build Very nice truck! How did you do in Indy? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-02-2010, 08:55 AM	#52
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build We only went for the show and cruise, the truck pulling was limited to the Diesel. But it was packed and a great time, I would suggest it for anyone that has the time. Met Ghetto Luxury there (he was nice enought to save us a good parking spot) another example of why this site is so great. Bringing us truck people together!!!! __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years

02-02-2010, 10:11 AM	#53
SMiller Account Suspended Join Date: Jun 2009 Location: Tipton IN Posts: 81	Re: Part Time Pulling Truck Build Being from Indiana I can say the jamboree is pretty cool! Lots of old Chevy's!

02-02-2010, 04:11 PM	#54
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,135	Re: Part Time Pulling Truck Build I had a couple of friends that pulled there. I plan on going to watch this year if at all possible. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-03-2010, 01:21 AM	#55
mudmizer Registered User Join Date: Jan 2007 Location: Bellingham, washington Posts: 260	Re: Part Time Pulling Truck Build Durramaxx, the truck looks beautiful. I just came across your build and like what you have done. Have you pulled with it yet? I know you have gotten all kinds of advice on your build, so I''l throw in a little as well. I have used my 68 for pulling in the 5500 bls class the last 2 years and have a few seconds and 2 firsts. I think you'll have better pulls if you can move your hitch as others have mentioned. My pics are not the best and I'm sure my hitch is not either but it works pretty well. It connects just behind the cab. You will need to add some sort of traction bars to the front. I run my rear suspension bolted solid, I can undo it for the street. As others have stated you should go to the 465 tranny and run low 2ed. I run 454 gears and crank the big block to about 7200 rpm. I'm still trying to tame the last of my front bounce and working the wheel back and forth helps a little. My class wont allow weight on the front so you may not have too much of a bouncing problem. Good luck and I'll be watching for ideas. Try the guys at truckpulls.com lots of help there just as on our 67-72 site. Attached Images __________________ 68 4x4, 454, 4 speed, disk brakes both ends, Sold my 69 SS396 Elcamino when young & stupid

02-13-2010, 07:51 PM	#56
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: Part Time Pulling Truck Build Turns out I am going to convert my puller back to a daily driver, and sell all my pulling mods and stuff... Gonna throw my 470 into a swb and drag race it! Let me know what you might need, and I'll give you a good deal. Here's a link to what I'm selling...prices are negotiable. http://www.network54.com/Forum/22827...stuff+for+sale A......... http://www.youtube.com/user/TeamFRANKENSTEIN __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

03-11-2010, 04:47 PM	#57
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: Part Time Pulling Truck Build Did you get to hook this truck at al last year? Curious how you made out. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........

03-11-2010, 07:19 PM	#58
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build Never did pull with it last year, I really didn't get all the bugs worked out till early this year and still have a minor motor issue that just came back up last week. The motor has started throwing the power steering belt just above 2000 rpm. All the pullies appear in line and this just started so I have no idea what is going on. But none the less, I am hoping to get a couple hooks in this year but I also ended up buying a 1992 Chevy with Rockwell axles and 44'' tires to go play in the mud with so we will have to see how much time I have. We are going to the big car show at Lake of the Ozarks the first week of May if anyone is in the area it is suppose to be a great show. I will keep you guys posted if I get a hook or two in, for right now I will continue to do some more burnouts .......... after the ps belt issue ahahahha __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years

03-11-2010, 07:21 PM	#59
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build Good looking truck Mudmizer, good luck with the pulling...... keep us posted as well __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years

03-12-2010, 03:48 AM	#60
pulltilbroke Registered User Join Date: Mar 2008 Location: Eagle Ne Posts: 356	Re: Part Time Pulling Truck Build After seeing this thread I'm kinda exited about seeing this truck when I grab that axle fom ya. __________________ 60 4x4,235,SM420,Rockwell T221,D44/HO33 sold 4/12 67 C-20,292,SM420,HO72 90 Dodge W250 Cummins,NV4500HD,205,D60/D80 93 Dodge W350 Dually Cummins, Getrag, 205,D60/D70

03-12-2010, 10:46 PM	#61
indyrenegade4x4 Registered User Join Date: Feb 2006 Location: sharpsville, indiana Posts: 122	Re: Part Time Pulling Truck Build nice ride

03-12-2010, 11:05 PM	#62
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build Thanks Indy Putilbroke - The house and shop are about 5 minutes apart but I would be more than happy to show it off. __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years

03-13-2010, 11:26 PM	#63
indyrenegade4x4 Registered User Join Date: Feb 2006 Location: sharpsville, indiana Posts: 122	Re: Part Time Pulling Truck Build your welcome there are so many rides at indy jambo to see and yours is one that stuck in my head.

03-14-2010, 04:02 AM	#64
pulltilbroke Registered User Join Date: Mar 2008 Location: Eagle Ne Posts: 356	Re: Part Time Pulling Truck Build I hope you stay up late, From the from the sounds of it I'll be in your area around midnight or so unless I camp out in Louisville. I'll be in touch regardless. __________________ 60 4x4,235,SM420,Rockwell T221,D44/HO33 sold 4/12 67 C-20,292,SM420,HO72 90 Dodge W250 Cummins,NV4500HD,205,D60/D80 93 Dodge W350 Dually Cummins, Getrag, 205,D60/D70

03-14-2010, 10:40 AM	#65
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build Give me a call and we can work something out, what time are you thinking? __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years



Register or Log In To remove these advertisements.

03-16-2010, 06:39 PM	#66
87scottsdale Registered User Join Date: Feb 2010 Location: belle mo Posts: 29	Re: Part Time Pulling Truck Build when is that show at the lake i live in rolla missouri i dont know if your fimilar with that area but i would like to come on up and get some ideas for my 87. thanks

03-17-2010, 07:41 AM	#67
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build It is the Magic Dragon Car Show, April 30 thru May2. Not for sure where, I heard the old strip, I am going with a buddy who has been there several times and no his way around. He says it is a great show. MAke sure to stop by and say hey, if you make it over. __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years

03-17-2010, 07:05 PM	#68
87scottsdale Registered User Join Date: Feb 2010 Location: belle mo Posts: 29	Re: Part Time Pulling Truck Build what days are you gonna be up there?

03-17-2010, 11:07 PM	#69
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build Well it depends on if I work Friday or not, I am trying to take off and if I do we will drive down Friday morning and stay till Sunday. __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years

04-22-2010, 02:08 PM	#70
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build Lake of The Ozarks in a couple weeks!!!!!! BACKWOODS MOTORSPORTS will be there! __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years

04-22-2010, 06:02 PM	#71
87fleetsidedude Registered User Join Date: May 2009 Location: osceola, iowa Posts: 155	Re: Part Time Pulling Truck Build no offense but..........just kidding your truck is freaking killer! makes me want to build a pull truck, you did an awesome job man!

04-23-2010, 07:57 AM	#72
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,107	Re: Part Time Pulling Truck Build Thanks 87Fleetside __________________ 1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years

04-28-2010, 08:51 AM	#73
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Part Time Pulling Truck Build cool build, I moved this over to the 4x4 build section... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-30-2010, 01:31 PM	#74
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Part Time Pulling Truck Build Very cool truck I like it! __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

04-30-2010, 03:22 PM	#75
propanemudtruck Local Redneck Authority Join Date: Mar 2009 Location: Grand Rapids, MI Posts: 584	Re: Part Time Pulling Truck Build Hey I was at the Indy Jamboree last year, most likely saw your truck there! The diesel pulls were amazing, as were the mud drags and the show trucks. All around best truck event I've ever been too, even though I didn't get to see the tough trucks. Nice build, would love to see it pull

Register or Log In To remove these advertisements.