Post Your Craigslist Finds Part 2

[Wikid61]

https://www.facebook.com/marketplace...3A108%7D%22%7D $5,500. ~Side note, I'd BUFF this, add mags (slots or Daisy 5-spokes) and drive it 4 ev'ah.

[Wikid61]

https://www.facebook.com/marketplace...36146432%22%7D

[Wikid61]

1967 C20 Chevy Truck 2wd, 327,Th400, PS, Rare Factory Big Back Window, Factory Eaton Rear axle with locker & 5.12 Gear ratio, Overload springs, Has great patina and would make a really cool hot rod. Contact Jason (Five O Three) Two O Nine - 8374 $4k OBO
https://www.facebook.com/marketplace...a-39b0de3f2cbb

[68bowtie]

Originally Posted by Wikid61

1967 C20 Chevy Truck 2wd, 327,Th400, PS, Rare Factory Big Back Window, Factory Eaton Rear axle with locker & 5.12 Gear ratio, Overload springs, Has great patina and would make a really cool hot rod. Contact Jason (Five O Three) Two O Nine - 8374 $4k OBO
https://www.facebook.com/marketplace...a-39b0de3f2cbb

Beauty!

[Wikid61]

https://www.facebook.com/marketplace...a-39b0de3f2cbb

[Wikid61]

https://www.facebook.com/marketplace...a-39b0de3f2cbb

[Wikid61]

1971 Chevy C20 3/4 ton camper special, granny geared 4 speed, long bed. This is a rusty farm truck that always starts on the first try even if she sat all winter. She has three fuel tanks, I only run the main tank. When pulled from her resting place I did the following to it:
- Tires
- Clutch
- Starter
- plugs/ wires
- Converted to electronic ignition
- Fuel tank flush
- All new filters (fuel, air, etc)
- Fuel Pump
- Battery
- Belts

I’m sure I did more. She’s a rusty girl but works great around our property and as a dump truck. I had always planned to do a full restoration but, too many projects. She’s on her second engine which is at 23,270. Rust areas: rear quarter panel below the camper boxes on both sides, rocker panels, floor boards are clean. I put way too much into her, help me recoop some of my cost for $2500 obo? https://www.facebook.com/marketplace...2-db292441575f

[Wikid61]

https://www.facebook.com/marketplace...Anull%7D%22%7D 1968 Chevrolet C10 · Truck · Driven 150,000 miles

68 Chevy C10 long box 6 cylinder 3 speed on the column runs and drives good 3K.

[Wikid61]

https://www.facebook.com/marketplace...6-5f9884af8e0a 1967 c10 great start to a nice build. Chevy 350 with turbo 400. Runs and drives nice. Just needs the right person to finish. $8500 obo or possibly trade.

[Wikid61]

Removed,

[Wikid61]

Super cool 67 short bed (Yes I know it has a 68 bed on it)
Truck was purchased out of Texas & made into a super cool reliable driver, body is beat up here and there but for the most part pretty solid, underside looks really nice & the body was painted in satin black leaving the imperfections, I was planning on sanding on it and patina it. It have tons of updates and new parts 454 big block with 400 turbo trans, power steering, power brakes, new chrome tilt steering colum,
New gauge cluster but some of it still needs to be hooked up.
Brand new wheels & tires, all new Chrome.
Too many new updates to list, runs and drives great still needs a few knickknacks, just a super fun cool little farm truck.
Price is $15,900
I'm located in Henry county Kentucky 40055
Clean Indiana title https://www.facebook.com/marketplace...7-d0d2ab8d9eac

[Wikid61]

1970 GMC 3/4 ton, freshly restored, 350 crate/350 trans. Turns heads wherever it goes. A/C truck, all A/C components come with truck though not hooked up

[Wikid61]

68 1/2 ton short bed stepside 353 on the tree new drop spindles power disc brake conversion c notched new rubber wiring harness mechanically good to go good body good new bed wood exhaust new bumpers https://www.facebook.com/marketplace...7-d0d2ab8d9eac

[Wikid61]

1971 Chevrolet C30 · Truck · Driven 53,222 miles

Located in Grove City Ohio.
1971 Chevrolet c30 2wd. 6cyl with a manual trans. I bought this from the original owner. It has 53k original miles. Super solid truck. Does have small spots of rust but overall very solid for the year. Factory tach. Pto setup to run the furnace cleaner. Really sweet piece of history with awesome patina. Would be sweet laid out on big wheels or as it sits. The truck does run and drive but the brakes are not great so to be roadworthy it will need the brakes gone thru. So I would trailer it home. $4500 cash. Located in grove city Ohio. Clear title. https://www.facebook.com/marketplace...7-d0d2ab8d9eac

[Wikid61]

Super cool 1972 Chevrolet c10 (c20 shortened) stepside shortbed. Dana 60 rear 3/4 ton brakes frame steering. Truck is built very well, it runs, handles, steers and stops amazing. Daily driver. Fresh 327 (less than 500mi) power steering, power brakes, automatic. Original ochre yellow (mustard). One of the coolest 67-72s on the front range. Truck has a great rockabilly/prohibition look and gets smiles everywhere it goes. If you wear a mask when you drive, this truck is NOT for you. $13500 100% FIRM! https://www.facebook.com/marketplace...e-302dfc0f23a1

[Jiggers72-GMC]

WOW, some nice short steppers for sale.

[best view]

There is a Facebook page post also on here u might want to go to

[IronCanine]

https://knoxville.craigslist.org/pts...338155815.html

This is the link to the 70 GMC 3/4 in post #1241

BTW...thanks to everyone who takes the time to post in this thread, but special shout out to Wikid61 who has been working it like a job of late.

[Wikid61]

72 Chevy C10 Custom Pickup - $28,995 (Seymour, Tn.) https://knoxville.craigslist.org/cto...356398998.html

[Wikid61]

1970 Chevrolet c10 short bed step side truck has been restored everything on suspension is new frame and underside looks new paint is not show quality but driver quality new interior has all new glasses and glass seals and door seals rebuilt 350 with turbo 350 trans good driver I also have brand new sbc 372 race engine and 700r4 race trans that would sell for additional price it is engine in pics on engine stand only selling because don’t have time to enjoy it and trying to expand new business sorry but no trades at all call or text https://knoxville.craigslist.org/cto...353577508.html

[Wikid61]

https://knoxville.craigslist.org/cto...348808203.html

[Wikid61]

I have a very solid and good running and driving Chevy
All original inside and out
250 cubic inch inline six cylinder was rebuilt about 10 years ago with 3 speed on the column transmission
New tires
New brakes and brake lines and wheel cylinders
Starts and runs every time.
The worst part on truck is The door latch mechanism on the passenger door is broken I have a new one
Floors and bed are solid with no rust.
Asking $8400 Or best offer https://knoxville.craigslist.org/cto...347031734.html

[Wikid61]

1967 Chevrolet C10 shortbed stepside, with loose TH350 trans / 350 engine included
This truck has not run in many years. It has been sitting under a pole barn for the last 14 years. I believe it still has the original straight-6 / 3 speed (converted to floor shift), but I am not positive that it’s original.

There are a few dents, and there is very little structural rust on the truck – mainly right where the tops of the rockers meet the floor pans. The pans themselves, the cab outriggers / mounts, the frame etc. are solid. The bed wood is obviously long gone, replaced with a sheet of plywood, but the bracing looks solid, with just surface rust. The worst spot on the truck is the top of the passenger’s outer rocker panel, which may need to be replaced. Second worst spot is the back lower corner of the passenger’s door. https://augusta.craigslist.org/cto/d...356770392.html

[Wikid61]

Healthy 396 V8
3 Speed Auto Transmission xnt
Lots of work done
Lots of xtra parts
Have whole Disc Brake system that will come with the truck ( Not Install)
Needs brake booster (brakes are very hard)
Some gages don’t work
Gas gage is not working
Temperature gage not working
Interior done already
Body need some attention but lots of body done
Some rust underneath driver side mostly
Trade? I can trade for something already done I’ll put cash in top of the deal
Just don’t have the time or space to be working on it
Runs and drives xnt
But not safe to drive with the bad brake booster https://inlandempire.craigslist.org/...355698038.html

[Wikid61]

Yeah, it's overpriced, but maybe I have a lot of fun driving it every day despite getting 12 mpg. Has a freshly rebuilt small block (so like new motor and and heads). It's a cammed, bored, and stroked 385 ci with only a few thousand miles since rebuilt with quality internals, message me for all the nerdy info and machine shop work. Installed a F.A.S.T
E.F.I. kit on it, so no fiddling with a carb, sucker tunes itself. THM 400 transmission that's works fantastic. New shocks, springs, ctrl arms, ball joints, tie rod ends. Full 2.5" Flowmaster exhaust w/ h pipe and shorty headers. Frame is not rusted, bent, or C notched for lowering. Disk brakes front and rear. GM 12 bolt rear end. No leaks, holds temp at 190° in slow traffic even with 135° intake air temps (the EFI kit tells you all the info). I built this to be a fun, drama-free daily. Recently passed MO state safety inspection. I got it running strong, you can make it pretty. https://www.facebook.com/marketplace...Anull%7D%22%7D