The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-08-2010, 08:03 PM   #1
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Cool Project: 1967 C10 Small Window

I've finally decided to make a build thread. I got this very solid '67 c10 stepside back in early January from 62ls1 (who has been TREMENDOUS help throughout the build) with the plans of doing a full frame off restorod. I'll let you know what's going on as I post pictures.
Attached Images
     
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 01-04-2017 at 04:56 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 08:07 PM   #2
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

It came with a factory 4-speed behind a 292 L6. Plans are to rebuild the engine.
Attached Images
     
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 01-04-2017 at 04:57 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 08:10 PM   #3
JRBECK64
Registered User
 
Join Date: Sep 2008
Location: Cornelius Oregon
Posts: 1,073
Re: Project: 1967 C10 Small Window

Looks like a great truck to rebuild. What are your plans, are you going to stay stock or what?

JRBECK64
JRBECK64 is offline   Reply With Quote
Old 08-08-2010, 08:11 PM   #4
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

We began by taking the bed off with the plans of rebuilding the whole rear section first including the chassis, 12-bolt rear end, suspension, etc.
Attached Images
     
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 08:12 PM   #5
C/10 King
Registered User
 
C/10 King's Avatar
 
Join Date: Feb 2009
Location: A****er, CA
Posts: 5,594
Thumbs up Re: Project: 1967 C10 Small Window

You're off to a fantastic start, very nice truck, 67' small back windows are hot! hot! hot!
__________________
C/10 Rene
1966 Short Fleet "The Hag"
1967 CST Short Fleet "Dark Poly"
1971 Short Fleet
1970 Jimmy Custom 2 WD "Golden Ticket"
1972 Blazer 2 WD "Retro Blaze"
C/10 King is offline   Reply With Quote
Old 08-08-2010, 08:18 PM   #6
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Once the rear half of the chassis was taken down to bare metal using a grinder with a wire brush and a sandblaster, it was primed and I began to tear apart the rear. At this point the chassis and truck as a whole were looking very solid with only minor pitting on the frame where the bed had been resting.
Attached Images
     
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 08:22 PM   #7
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Quote:
Originally Posted by JRBECK64 View Post
Looks like a great truck to rebuild. What are your plans, are you going to stay stock or what?

JRBECK64
Well I'm not planning on anything crazy custom and I want to keep that classic look. I'm doing a 4/6 drop, wheels, some engine mods but other than that not much more.....at least I don't think right now

Quote:
Originally Posted by C/10 King View Post
You're off to a fantastic start, very nice truck, 67' small back windows are hot! hot! hot!
Thanks C/10 King! Yeah I agree, they're my favorite!
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 08:26 PM   #8
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

We pulled out the differential and replaced all the seals and bearings as well as just cleaned everything up.
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 08:30 PM   #9
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Here's what I've been using in the way of sandblasters. The cabinet is a HUGE help when it comes to getting smaller parts cleaned up. I'm keeping rear drums in and converting the front to disc.
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 02-11-2012 at 07:28 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 08:38 PM   #10
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Here are the same rebuilt rear drums and the Early Classic 4/6 drop (the Super Track bar was backordered).
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 08:48 PM   #11
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Everything went back into place for a mock up with the bed on. The next step was to pull off all the front fenders, grill, etc. so that we could pull the engine and trans as well as the cab. I don't know where the pics are of this but I'll post when I get to doing those things. I then pulled the front clip off so that the frame could be finished.
Attached Images
   
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 08-08-2010 at 08:56 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 08:58 PM   #12
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

..
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 09:01 PM   #13
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

It was so awesome having finally finished the frame.
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 08-08-2010 at 10:24 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 09:06 PM   #14
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

At this point I was trying to get the front clip done. I was able to put all of the control arms into the sandblasting cabinet and cleaned up the front crossmember using the same process of grinding and sandblasting. I stopped by Outback and got all new shafts, stoppers, and U-bolts and painted those as well as the 2.5" drop spindles from ECE.
Attached Images
   
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 08-08-2010 at 10:25 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 09:11 PM   #15
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Here's some rotors we had that I blasted, painted, and got turned. I was more than happy with how they turned out!
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 08-08-2010 at 10:22 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 09:17 PM   #16
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

I then got the American Racing Torq Thrust II's! These pictures were on another thread of mine lost somewhere so here they are again. And yes I know it's a wheel that you see on every other car/truck at a show but it's for good reason. Believe me, I looked for something that wasn't as common but the look couldn't be beat IMO . They are 17x8 all around with the rear being 29" overall and the front 28".
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 08-08-2010 at 10:25 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 09:20 PM   #17
Shyguy
Junior Member
 
Shyguy's Avatar
 
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
Re: Project: 1967 C10 Small Window

Everything looking great so far. I am interested in this build because this fall I hope to start working on my '67 swb stepper with a 250 and 4 speed.
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465.
'75 C-30 Single Cab DRW-350 small block/NP-435.
'77 GMC-6500 Dump Truck, 427 Tall Deck.
'92 GMC K-3500 Duallie, 454/4L80E.
Shyguy is offline   Reply With Quote
Old 08-08-2010, 09:20 PM   #18
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

I got them mounted up to the rear and was very pleased to see how well the drums filled out the centers.
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 09:21 PM   #19
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Quote:
Originally Posted by Shyguy View Post
Everything looking great so far. I am interested in this build because this fall I hope to start working on my '67 swb stepper with a 250 and 4 speed.
Thanks a lot and very nice!! What are your plans for it?
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67

Last edited by David67; 08-08-2010 at 09:21 PM.
David67 is offline   Reply With Quote
Old 08-08-2010, 09:25 PM   #20
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

And at last everything came together. This is pretty much where we are right now except we have the steering linkages in and the PS box as well as a few brake lines.
Attached Images
    
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 09:26 PM   #21
tantrumpipeline
Master Procrastinator
 
tantrumpipeline's Avatar
 
Join Date: Sep 2009
Location: Grande Prairie AB Canada
Posts: 1,128
Re: Project: 1967 C10 Small Window

I'm in, wanna see this one
__________________
My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506
20 Duramax tow pig
68 2wd short stepper project
77 2wd short fleet beater
52 short project
tantrumpipeline is offline   Reply With Quote
Old 08-08-2010, 09:30 PM   #22
Shyguy
Junior Member
 
Shyguy's Avatar
 
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
Re: Project: 1967 C10 Small Window

I am thinking about going mostly for a stock look on the '67. It will require a lot of rust repair work to get it to the stock look. I want to use it to cruise the back roads and small towns around here. I really like the 250 with the 4 speed.

I have a '71 with a 454 and 4 speed that will get more of a custom build, but that is in the far future since it is my work truck for now.
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465.
'75 C-30 Single Cab DRW-350 small block/NP-435.
'77 GMC-6500 Dump Truck, 427 Tall Deck.
'92 GMC K-3500 Duallie, 454/4L80E.
Shyguy is offline   Reply With Quote
Old 08-08-2010, 09:31 PM   #23
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

In order for the PS box to fit, the frame had to be modified which for us involved cutting out the spot and welding in another plate. Also, the radiator bracket had to be trimmed down.
Attached Images
     
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 09:34 PM   #24
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Quote:
Originally Posted by Shyguy View Post
I am thinking about going mostly for a stock look on the '67. It will require a lot of rust repair work to get it to the stock look. I want to use it to cruise the back roads and small towns around here. I really like the 250 with the 4 speed.

I have a '71 with a 454 and 4 speed that will get more of a custom build, but that is in the far future since it is my work truck for now.
Very cool I can't wait to see how that goes once you get into it.
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Old 08-08-2010, 09:47 PM   #25
David67
Registered User
 
David67's Avatar
 
Join Date: Mar 2010
Location: Spring, TX
Posts: 886
Re: Project: 1967 C10 Small Window

Oops. Can a moderator please move this to projects and builds?
__________________
1967 C10

Fightin' Texas Aggie Class of 2015

IG: david_r67
David67 is offline   Reply With Quote
Reply

Bookmarks

Tags
1967, small block, small window, stepside


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com