Jans 53 - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NorCalGal · 05-17-2021, 12:08 PM

Too bad I couldn’t build a couple hip joints.

**8man** · 05-17-2021, 12:12 PM

A talented metal worker like you? I say go for it. I'm sure the hubby would appreciate the custom work.

doowopper · 05-28-2021, 06:50 PM

subscribed

NorCalGal · 05-28-2021, 07:22 PM

Steve is doing great we were back home 6 hrs after he came out of surgery. Been scooting around with his walker to the mail box and some short walks. Some of my truck time is being taken up with extra chores but I’ve managed to squeeze the truck in. Been working on getting the hinges shipped out to people.
So I’m doing close examination of body work looking for pin holes and last minute repairs. The temp here is already getting so hot 109 on Monday. Not sure how much will get done this week!

**8man** · 05-29-2021, 08:33 AM

Congrats to Steve. 109 is miserable! Stay cool.

**Gregski** · 05-29-2021, 10:45 AM

Quote:

Originally Posted by NorCalGal

The temp here is already getting so hot 109 on Monday. Not sure how much will get done this week!

OK my Cali buddy I had to Fact Check that and oh my lawrd:

National Weather Service:

Excessive heat warning for Southern Sacramento Valley.

NorCalGal · 05-29-2021, 01:14 PM

Quote:

Originally Posted by 8man

Congrats to Steve. 109 is miserable! Stay cool.

Hey Robert, good to hear from you! I’m assuming you’re also stuck in body work jail. It gets awful boring but it is what makes 95% of the paint job. Keep at it!

Gregski put on your heat shield next thing we know the whole state will be on fire again. So much for keeping things that cause cancer out of California. The good new is we’ve been practicing wearing masks for a year and a half now!

**8man** · 05-29-2021, 05:40 PM

I have beat on fenders, sanded, beat on fenders, sanded, welded, ground the welds, beat on fenders until I'm just tired of it. So what did I do the last 3 days? Sanded on fenders for a friends Harley. What a break that was!

**Gregski** · 05-29-2021, 07:57 PM

Quote:

Originally Posted by 8man

I have beat on fenders, sanded, beat on fenders, sanded, welded, ground the welds, beat on fenders until I'm just tired of it. So what did I do the last 3 days? Sanded on fenders for a friends Harley. What a break that was!

Yeah, ok, sure, but do you work on fenders?

jocww · 05-31-2021, 02:21 AM

Good seeing you today Jan! The primer is looking great! Thanks again for the hinges.

NorCalGal · 06-01-2021, 01:55 PM

John, it’s always good to see you too! I need to finish installing the new hinges on my truck before I end up with none left.

SFFD103 · 07-31-2021, 05:02 PM

Just read the whole thread, wow you’re doing AWESOME work and admire your attention to detail and dedication. I have a lot to aspire to. I’m working on a 54’ AD with a 6.0L and it’s been quite the journey. Keep your posts coming.

NorCalGal · 08-01-2021, 03:36 PM

Quote:

Originally Posted by SFFD103

Just read the whole thread, wow you’re doing AWESOME work and admire your attention to detail and dedication. I have a lot to aspire to. I’m working on a 54’ AD with a 6.0L and it’s been quite the journey. Keep your posts coming.

Thank you for your kind words, looking forward to seeing your build.

NorCalGal · 08-28-2021, 07:47 PM

Took a break from body work today and put some time in on my bed. Changed some things around so that the bed can be removed all in one piece if I choose to. Tomorrow I will look at welding in the new hinges I had cut out by send cut send.

NorCalGal · 08-28-2021, 07:49 PM

Also added a YouTube video
https://www.youtube.com/watch?v=F5C_hxIfvFo

**Getter-Done** · 08-28-2021, 08:38 PM

Quote:

Originally Posted by NorCalGal

Also added a YouTube video
https://www.youtube.com/watch?v=F5C_hxIfvFo

Watched and subbed to your channel

,.....///

**8man** · 08-29-2021, 09:29 AM

Same. Looking forward to the hinges video.

olcarguy · 08-29-2021, 08:48 PM

Ya Me 2

**Getter-Done** · 08-29-2021, 10:13 PM

Quote:

Originally Posted by NorCalGal

Also added a YouTube video
https://www.youtube.com/watch?v=F5C_hxIfvFo

I hope you have 1000+ Subscriptions Soon on your Channel.

Great work

,,...////

NorCalGal · 08-29-2021, 11:51 PM

So I planned on finishing the install on the new style hinges I had cut, but fate had other plans. BE SAFE THEY SAID, WEAR GLOVES THEY SAID, IT WILL BE FUN THEY SAID!…..…….UH OH.
Any questions?

NorCalGal · 08-30-2021, 12:07 AM

I will leave you with a short video of the old hinge design at work
https://youtu.be/ibZCVOXHu-g

**youngrodder** · 08-30-2021, 07:17 PM

OUCH....speedy recovery.

Marc

NorCalGal · 08-30-2021, 07:40 PM

Thanks Marc, I go see the orthopedic Dr tomorrow.
Already know it’s broken and ground through the nail down to the bone. Hoping it will heal on its own but don’t think that fingernail will come back.

daveshilling · 08-30-2021, 08:12 PM

Quote:

Originally Posted by NorCalGal

Thanks Marc, I go see the orthopedic Dr tomorrow.
Already know it’s broken and ground through the nail down to the bone. Hoping it will heal on its own but don’t think that fingernail will come back.

Oh my goodness Jan, you're a tough cookie! You'll be back at it in no time, I'm sure.

**Getter-Done** · 08-30-2021, 10:21 PM

Oh No!!!!

I always put Neosporine on all my Boo Boo's

Looks like that calls for a little bit more than that

I hope it heals well for you.

I have had some major cuts myself.

,,,....////

05-17-2021, 12:08 PM	#351
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Too bad I couldn’t build a couple hip joints. __________________ Jan's 53

05-17-2021, 12:12 PM	#352
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,266	Re: Jans 53 A talented metal worker like you? I say go for it. I'm sure the hubby would appreciate the custom work. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

05-28-2021, 06:50 PM	#353
doowopper Registered User Join Date: Nov 2020 Location: socal Posts: 49	Re: Jans 53 subscribed

05-28-2021, 07:22 PM	#354
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Steve is doing great we were back home 6 hrs after he came out of surgery. Been scooting around with his walker to the mail box and some short walks. Some of my truck time is being taken up with extra chores but I’ve managed to squeeze the truck in. Been working on getting the hinges shipped out to people. So I’m doing close examination of body work looking for pin holes and last minute repairs. The temp here is already getting so hot 109 on Monday. Not sure how much will get done this week! __________________ Jan's 53

05-29-2021, 08:33 AM	#355
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,266	Re: Jans 53 Congrats to Steve. 109 is miserable! Stay cool. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

05-29-2021, 05:40 PM	#358
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,266	Re: Jans 53 I have beat on fenders, sanded, beat on fenders, sanded, welded, ground the welds, beat on fenders until I'm just tired of it. So what did I do the last 3 days? Sanded on fenders for a friends Harley. What a break that was! __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

05-31-2021, 02:21 AM	#360
jocww Registered User Join Date: Aug 2017 Location: San Ramon, Ca Posts: 251	Re: Jans 53 Good seeing you today Jan! The primer is looking great! Thanks again for the hinges. __________________ My build a 49 5 window ls1 4l60e on a TCI chassis http://67-72chevytrucks.com/vboard/s...d.php?t=754926 My travel blog The Wong Winding Road-Adventures of The Chinese Cowboy https://thewongwindingroad.blogspot.com/

06-01-2021, 01:55 PM	#361
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 John, it’s always good to see you too! I need to finish installing the new hinges on my truck before I end up with none left. __________________ Jan's 53

07-31-2021, 05:02 PM	#362
SFFD103 Registered User Join Date: Nov 2017 Location: Bay Area, CA Posts: 29	Re: Jans 53 Just read the whole thread, wow you’re doing AWESOME work and admire your attention to detail and dedication. I have a lot to aspire to. I’m working on a 54’ AD with a 6.0L and it’s been quite the journey. Keep your posts coming.

08-28-2021, 07:47 PM	#364
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Took a break from body work today and put some time in on my bed. Changed some things around so that the bed can be removed all in one piece if I choose to. Tomorrow I will look at welding in the new hinges I had cut out by send cut send. Attached Images __________________ Jan's 53

08-28-2021, 07:49 PM	#365
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Also added a YouTube video https://www.youtube.com/watch?v=F5C_hxIfvFo __________________ Jan's 53

08-29-2021, 09:29 AM	#367
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,266	Re: Jans 53 Same. Looking forward to the hinges video. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

08-29-2021, 08:48 PM	#368
olcarguy Registered User Join Date: Sep 2019 Location: Maynooth, Ontario, Canada Posts: 174	Re: Jans 53 Ya Me 2 __________________ http://67-72chevytrucks.com/vboard/s...82#post8619382

08-29-2021, 11:51 PM	#370
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 So I planned on finishing the install on the new style hinges I had cut, but fate had other plans. BE SAFE THEY SAID, WEAR GLOVES THEY SAID, IT WILL BE FUN THEY SAID!…..…….UH OH. Any questions? Attached Images __________________ Jan's 53

08-30-2021, 12:07 AM	#371
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 I will leave you with a short video of the old hinge design at work https://youtu.be/ibZCVOXHu-g Attached Images __________________ Jan's 53



Register or Log In To remove these advertisements.

08-30-2021, 07:17 PM	#372
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,746	Re: Jans 53 OUCH....speedy recovery. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

08-30-2021, 07:40 PM	#373
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Thanks Marc, I go see the orthopedic Dr tomorrow. Already know it’s broken and ground through the nail down to the bone. Hoping it will heal on its own but don’t think that fingernail will come back. __________________ Jan's 53

08-30-2021, 10:21 PM	#375
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,701	Re: Jans 53 Oh No!!!! I always put Neosporine on all my Boo Boo's Looks like that calls for a little bit more than that I hope it heals well for you. I have had some major cuts myself. ,,,....//// __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

Register or Log In To remove these advertisements.