fuel tank power line exit cab location

[zicc1835]

not sure how or where the fuel tank wire comes out of the cab to get to the tank relocated out back on the frame Dumb.... a$$ didn't take pictures of how I ran it when I dismantled I guess its like a blazer or Burb pictures would be great

[RustyPile]

Originally Posted by zicc1835

not sure how or where the fuel tank wire comes out of the cab to get to the tank relocated out back on the frame Dumb.... a$$ didn't take pictures of how I ran it when I dismantled I guess its like a blazer or Burb pictures would be great

There is no "prescribed method" to exit the cab that I know of.. I suggest you pick an unused cavity on the firewall connector and using the Packard 56 male and female terminals, exit the cab there and bundle it with the tail light and brake light harness to the rear.

[pjmoreland]

All of the terminals are being used on my bulkhead connector, so I ran mine out the hole in the rear of the cab floor where the original fuel line exited.

[Palf70Step]

That's where I ran mine also and down the passenger side rail in my case.

[HO455]

It's nothing like a Suburban! Burban fuel tank wiring runs with the rear lighting harness, up the "A" pillar, back above the windows on the drivers side, and the down "C" pillar before exiting the cab next to the rear access.