|
10-14-2010, 10:19 AM
|
#1 |
|
Registered User
Join Date: Jul 2009
Location: watertown, tn
Posts: 332
|
stock 71 column mod?
just wondering if the stock column in my '71 lwb can be trimmed down in length, or if anyone has ever done such? it would be nice to shorten the length by about 4", for it is really crammped in the cab of these old trucks. if i could shorten my column and get the pedals a little closer to the floor i would be in buisness.
thanks, jc
__________________
'71 LWB c10-"WORK" in progress  385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage |
|
|
|
10-14-2010, 11:07 AM
|
#2 |
|
Registered User
Join Date: Sep 2009
Location: Lafayette, Indiana
Posts: 339
|
Re: stock 71 column mod?
Here's a really good thread on shortening the steering column...
http://67-72chevytrucks.com/vboard/s...d.php?t=191143
__________________
1969 CST/10 "GreenAndWhite" 1974 Nova (SOLD... End of an Era) 2000 Impala (RIP) 2008 Malibu Brand Loyal... I've never owned a Vehicle not made by Chevrolet. |
|
|
|
|
10-14-2010, 12:02 PM
|
#3 |
|
Registered User
Join Date: Jul 2009
Location: watertown, tn
Posts: 332
|
Re: stock 71 column mod?
thanks, flounderGDI i belive that will help alot.
__________________
'71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage |
|
|
|
|
10-14-2010, 12:42 PM
|
#4 |
|
Old Skool Club
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: stock 71 column mod?
I'm glad this question got asked and the answer was already ready, all ready. Putters' avatar and his 3/4 rear view don't match. Wasn't ready for that.....
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
