'69K10, Build/Help

[KyFarm]

transmission coolant lines run and all wiring is complete. I want to tape it up and tuck it away SO badly, just not gonna till its running and tested completely.

Had an issue with the pwr steering pump pulley not lining up but swapped out brackets and that fixed the issue. So belts are installed and things are slowly moving forward.

Next will be trying to get radiator hoses, I think I can carry my old top hose in cause I just need one that is about 2" longer. Might need to build or get a custom one for the bottom, hopefully its not too hard to find.

ALSO, gonna go to a "hot rod" shop to get help with my valve covers because: they don't have a port that is big enough for a decent breather. Both covers are the same, center bolts with an oil fill and a 15/16" hole for a PCV valve, and I need help with some decent plug wire brackets, all the ones I see use the edge bolt locations for valve cover bolts to bolt down. I'd like to get a set of brackets and plug wires that are the proper length.