Buy c-notch or make my own? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mtm_seven · 12-10-2006, 07:04 PM

Hey Guys,

I'm looking into notching the rear of my '67 for bags and wonder if it's worth paying for the kit or just fabbing some for myself.

Anyone made their own C-Notch kit? Horror stories? Maybe I'm just a cheep MoFo but I wonder if I could spend that money someplace else.

Comments?

action · 12-10-2006, 08:55 PM

I don't know about anyone else but I am going to fab my own.
Jack

BigShoe24 · 12-10-2006, 09:30 PM

KpComponents makes a great kit. Its a little $$$$, but looks great.

jimmydean · 12-10-2006, 09:55 PM

I have seen pictures of some solid ones around here. Just get 1/4" thick 4" or so pipe, cut it in half, and weld it in.

I got the CPP bolt-in notch because I want mine as beefy as possible. I will weld it in once it's bolted to make it better than stock.

jlaird · 12-10-2006, 10:05 PM

My vote is to make it yourself!

action · 12-10-2006, 11:01 PM

I am going to do just what jimmydean said but was thinking 5".Add a little
1/4" plate and done.
Jack

jimmydean · 12-10-2006, 11:28 PM

Sounds like a plan. 4" was a guess, I would think 5" or so would work.

**N2TRUX** · 12-10-2006, 11:45 PM

You doing a C-notch or a step notch? If your just doing a C-notch then the pipe will work just fine. Just be sure to box the inside of the frame too...

el curioso · 12-11-2006, 12:30 AM

If you know how to weld and know how to fab go head and do it It might be the swame as the one that you will buy but you have the admiration and pride of saying i made it all work from stock.

MY two cents..

abadsvt · 12-11-2006, 01:21 AM

I think you should try and make it yourself. It is amazing what you can accomplish by trying it your self. Good luck and post pics when you are done.

Josh

gringoloco · 12-11-2006, 03:12 AM

CPP notch is nice though, and only $100. Takes all the guesswork out of it though- some of the fun too...

C10-Driver · 12-11-2006, 11:49 AM

Quote:

Originally Posted by gringoloco

CPP notch is nice though, and only $100. Takes all the guesswork out of it though- some of the fun too...

I would agree that the pre-fab notch kits are a good way to go. Depends what you consider your time is worth. Spending $100 might save you a lot of time in the end.

I am in the process of cutting out my custom-built c-notch and installing a pre-fab one. We "guessed" a little incorrectly on the pipe diameter and placement of the notch. If you consider doing things twice as being fun, I guess I'm having a blast.

*Shane* · 12-11-2006, 12:13 PM

Buy it, it's definitely worth the price vs. the time invested in doing it yourself.

entourageguy · 12-11-2006, 06:32 PM

Quote:

Originally Posted by BigShoe24

KpComponents makes a great kit. Its a little $$$$, but looks great.

Hey Big Shoe
I'm not trying to be nosey but by the pic it looks like the notches have not been put in the same way..
Brian

ctg611 · 12-11-2006, 09:30 PM

Here are the C notch's I did on my 66 GMC. Took pipe, cut in half, cut frame, placed in pipe and then boxed in the frame.

mtm_seven · 12-11-2006, 10:15 PM

Thanks for the replies guys, keep 'em coming.
With the pipe method, how low can you get the truck? I'm not looking to scrape the ground but want to be able to match whatever front height that I use.

The plan as of now is 2.5 drop spindles and cut one loop from the spring in the front with bags and a c-notch in the rear. Does anyone think I'll have trouble getting low enuff in the back?

mtm_seven · 12-11-2006, 10:22 PM

Please take the time to read the rules before posting here-

XI. All For Sale posts shall have a price or prices, as well as your
location. No bids or auctions allowed here!!! If you don't know the
price of what you are selling, then you should do some research. If a Moderator or Administrator here asks you to post price(s) and you have not within a 12 hour time frame, they will delete your thread, period.

XIV. As of October 15th 2005 subscribing members will be the only ones permitted to post for sale and want to buy ads on any classified section of this site. All other rules of buying and selling still apply. 67-72chevytrucks.com, its administrators or staff are not responsible for any transactions on or off the forums. We will work hard to ensure you a smooth transaction, and help in the event you may need it, but all for sale and trade areas are buyer beware. Any persons who have misrepresented an item, lie about an item, fail to deliver, or are in violation of any of the rules will forfeit there subscription fees and be banned from 67-72chevytrucks.com

The Forum staff would like to encourage you to become a subscribing member. Your support will be greatly appreciated.

gringoloco · 12-11-2006, 11:13 PM

Quote:

Originally Posted by mtm_seven

Thanks for the replies guys, keep 'em coming.
With the pipe method, how low can you get the truck? I'm not looking to scrape the ground but want to be able to match whatever front height that I use.

The plan as of now is 2.5 drop spindles and cut one loop from the spring in the front with bags and a c-notch in the rear. Does anyone think I'll have trouble getting low enuff in the back?

Nope. Should be perfect. You will need the notch. -Chris

Inthuwind · 12-12-2006, 09:23 AM

I too have the pipe C notch with a bump stop. It's pretty low IMO. Cheaper route without sacrificing durability. I have to box mine in still. Not hard to do, just be accurate with your measuring and cutting.

laidout69 · 12-13-2006, 03:48 PM

i say make it your self. i made my own. thats wut called custom haha

67Fleet · 12-13-2006, 10:19 PM

Quote:

Originally Posted by entourageguy

Hey Big Shoe
I'm not trying to be nosey but by the pic it looks like the notches have not been put in the same way..
Brian

It's an optical illusion that they look that way due to the angle of the notches, as they follow the natural contours of the frame. It plays tricks on your eyes.

KAILUAZ · 12-14-2006, 01:18 PM

Quote:

Originally Posted by 67Fleet

It's an optical illusion that they look that way due to the angle of the notches, as they follow the natural contours of the frame. It plays tricks on your eyes.

I don't see how that could be, looks like the pass side is backwards.

Alvin · 12-14-2006, 02:04 PM

Quote:

Originally Posted by KAILUAZ

I don't see how that could be, looks like the pass side is backwards.

Looks fine to me. But that is the reason I don't like step notches on these trucks. If I were interested in going that low, I'd back-half it.

XXL · 12-14-2006, 05:28 PM

Quote:

Originally Posted by KAILUAZ

I don't see how that could be, looks like the pass side is backwards.

This is the same truck...

12-10-2006, 07:04 PM	#1
mtm_seven Loading..... Join Date: Jan 2000 Location: Austin, Texas, USA Posts: 214	Buy c-notch or make my own? Hey Guys, I'm looking into notching the rear of my '67 for bags and wonder if it's worth paying for the kit or just fabbing some for myself. Anyone made their own C-Notch kit? Horror stories? Maybe I'm just a cheep MoFo but I wonder if I could spend that money someplace else. Comments? __________________ -M7 '69 SWB GMC 5.7 EFI ‘69 C/10 SWB patina survivor ‘71 GMC K20 '72 K5 1-ton gear 468BB ‘86 K30 GMC High Sierra C&C Single Cab '96 SWB Single Cab 5.7 ‘99 SWB Z71 Single Cab '00 SWB Single Cab 5.3 '01 K2500 Yukon Safari 6.0 ‘06 2500HD Single Cab C&C Duramax 4x4 '08 1500 crew '11 2500HD Single Cab Duramax 4x4

12-10-2006, 08:55 PM	#2
action Active Member Join Date: Dec 2005 Location: Valley Springs, Ca. Posts: 266	Re: Buy c-notch or make my own? I don't know about anyone else but I am going to fab my own. Jack

12-10-2006, 09:30 PM	#3
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Buy c-notch or make my own? KpComponents makes a great kit. Its a little $$$$, but looks great. Attached Images

12-10-2006, 09:55 PM	#4
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Buy c-notch or make my own? I have seen pictures of some solid ones around here. Just get 1/4" thick 4" or so pipe, cut it in half, and weld it in. I got the CPP bolt-in notch because I want mine as beefy as possible. I will weld it in once it's bolted to make it better than stock.

12-10-2006, 10:05 PM	#5
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Buy c-notch or make my own? My vote is to make it yourself!

12-10-2006, 11:01 PM	#6
action Active Member Join Date: Dec 2005 Location: Valley Springs, Ca. Posts: 266	Re: Buy c-notch or make my own? I am going to do just what jimmydean said but was thinking 5".Add a little 1/4" plate and done. Jack

12-10-2006, 11:28 PM	#7
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Buy c-notch or make my own? Sounds like a plan. 4" was a guess, I would think 5" or so would work.

12-10-2006, 11:45 PM	#8
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Buy c-notch or make my own? You doing a C-notch or a step notch? If your just doing a C-notch then the pipe will work just fine. Just be sure to box the inside of the frame too... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

12-11-2006, 12:30 AM	#9
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	Re: Buy c-notch or make my own? If you know how to weld and know how to fab go head and do it It might be the swame as the one that you will buy but you have the admiration and pride of saying i made it all work from stock. MY two cents.. __________________ 1969 Chevy C-10 350/700r4

12-11-2006, 01:21 AM	#10
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Buy c-notch or make my own? I think you should try and make it yourself. It is amazing what you can accomplish by trying it your self. Good luck and post pics when you are done. Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

12-11-2006, 03:12 AM	#11
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Buy c-notch or make my own? CPP notch is nice though, and only $100. Takes all the guesswork out of it though- some of the fun too... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-11-2006, 12:13 PM	#13
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Buy c-notch or make my own? Buy it, it's definitely worth the price vs. the time invested in doing it yourself.

12-11-2006, 09:30 PM	#15
ctg611 Registered User Join Date: Jun 2004 Location: Houston, TX Posts: 21	Re: Buy c-notch or make my own? Here are the C notch's I did on my 66 GMC. Took pipe, cut in half, cut frame, placed in pipe and then boxed in the frame. Attached Images

12-11-2006, 10:15 PM	#16
mtm_seven Loading..... Join Date: Jan 2000 Location: Austin, Texas, USA Posts: 214	Re: Buy c-notch or make my own? Thanks for the replies guys, keep 'em coming. With the pipe method, how low can you get the truck? I'm not looking to scrape the ground but want to be able to match whatever front height that I use. The plan as of now is 2.5 drop spindles and cut one loop from the spring in the front with bags and a c-notch in the rear. Does anyone think I'll have trouble getting low enuff in the back? __________________ -M7 '69 SWB GMC 5.7 EFI ‘69 C/10 SWB patina survivor ‘71 GMC K20 '72 K5 1-ton gear 468BB ‘86 K30 GMC High Sierra C&C Single Cab '96 SWB Single Cab 5.7 ‘99 SWB Z71 Single Cab '00 SWB Single Cab 5.3 '01 K2500 Yukon Safari 6.0 ‘06 2500HD Single Cab C&C Duramax 4x4 '08 1500 crew '11 2500HD Single Cab Duramax 4x4

12-11-2006, 10:22 PM	#17
mtm_seven Loading..... Join Date: Jan 2000 Location: Austin, Texas, USA Posts: 214	Re: Buy c-notch or make my own? Please take the time to read the rules before posting here- XI. All For Sale posts shall have a price or prices, as well as your location. No bids or auctions allowed here!!! If you don't know the price of what you are selling, then you should do some research. If a Moderator or Administrator here asks you to post price(s) and you have not within a 12 hour time frame, they will delete your thread, period. XIV. As of October 15th 2005 subscribing members will be the only ones permitted to post for sale and want to buy ads on any classified section of this site. All other rules of buying and selling still apply. 67-72chevytrucks.com, its administrators or staff are not responsible for any transactions on or off the forums. We will work hard to ensure you a smooth transaction, and help in the event you may need it, but all for sale and trade areas are buyer beware. Any persons who have misrepresented an item, lie about an item, fail to deliver, or are in violation of any of the rules will forfeit there subscription fees and be banned from 67-72chevytrucks.com The Forum staff would like to encourage you to become a subscribing member. Your support will be greatly appreciated. __________________ -M7 '69 SWB GMC 5.7 EFI ‘69 C/10 SWB patina survivor ‘71 GMC K20 '72 K5 1-ton gear 468BB ‘86 K30 GMC High Sierra C&C Single Cab '96 SWB Single Cab 5.7 ‘99 SWB Z71 Single Cab '00 SWB Single Cab 5.3 '01 K2500 Yukon Safari 6.0 ‘06 2500HD Single Cab C&C Duramax 4x4 '08 1500 crew '11 2500HD Single Cab Duramax 4x4 Last edited by N2TRUX; 12-14-2006 at 09:57 AM. Reason: No, this is not OK



Register or Log In To remove these advertisements.

12-12-2006, 09:23 AM	#19
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Buy c-notch or make my own? I too have the pipe C notch with a bump stop. It's pretty low IMO. Cheaper route without sacrificing durability. I have to box mine in still. Not hard to do, just be accurate with your measuring and cutting. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

12-13-2006, 03:48 PM	#20
laidout69 Registered User Join Date: Feb 2006 Location: hanford,ca Posts: 36	Re: Buy c-notch or make my own? i say make it your self. i made my own. thats wut called custom haha __________________ 1969 chevy bagged, fully shaved still UnDeRcOnStRuCtIoN

Register or Log In To remove these advertisements.